GSS Machinery metal and ceramic laser tubes combine the benefits of longer life and lower recharge costs, while providing a higher-quality cutting and engraving.
The core parts should be paid special attention when purchasing, especially laser generator, cutting head, servo motor, guide rail, water chiller, and some accessories. These parts will affect the cutting speed and accuracy of the machine.
A cooling unit is a water heater that is used to cool the machine. For example, an electro-optical transformation rate of 33% is used, and approximately 67% is converted into electric energy. To ensure that the equipment runs smoothly, the chiller should be cooled using water.
A fiber laser cutter costs between $8,800.00 and 260,000.00. A CO2 cutter costs between $2600.00 and $68800. A mixed laser cutting machine costs from $6800 to $32,500
Laser cutting is a noncontact subtractive manufacturing technology that can be used to cut materials for small businesses and industrial manufacturing.
To extend the life of your machine, you must check its straightness and verticality every six months. If any anomaly is discovered, you should maintain and debug it promptly.
Laser cutting systems can also be used in commercial manufacturing and school education.
CNC laser cutter with CCD camera visual recognition system for accurate cutting gaskets & seals made of rubber, neoprene, silicone, graphite, CNAF, PTFE.
Waveguide laser tubes by GSS Machinery have the best beam quality available. GSS Machinery laser tubes deliver the highest quality engraving or cutting results.
The optical path system concentrates the laser beam produced by the laser generator to produce a beam with high power density. The beam is irradiated onto part surfaces to cause them to reach a boiling point. In addition, the beam's high-pressure gas coaxial blows away molten materials. The beam moves in relation to the part. This allows the material to be cut.
For quality reasons, fusion cutting can also be utilized to cut unalloyed and low-alloyed steels. This creates oxide-free cutting surfaces, but cutting speeds are considerably slower.
The laser resonator is the powerhouse of any laser cutting machine. It consists of a glass tube with two mirrors placed with their faces facing each other. The tube consists of gases like CO2, hydrogen, nitrogen, and helium.
Bevel cutting calls for a precise knowledge of the laser machine and the cutting processes. Corners, lead-ins and run-outs must be cut in a special sequence to achieve the desired quality.Bevel cutting also places significant demands on the cut parts’ programming. Special auxiliary functions are needed to set up the units for laser bevel cutting.
GSS Machinery ceramic and metal laser tubes combine the benefits that offer longer life and lower recharge cost, as well as higher-quality engraving and cutting.
Laser cutters can cut all types of metals, including mild steel, stainless steel, and nonferrous metals.
Laser cutting is classified into three types: fusion cutting, flame cutting, and remote cutting. An inert gas (typically nitrogen) is used in fusion cutting to expel molten material from the kerf. Nitrogen gas does not exothermically react with molten material and thus contributes no energy to the system.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.