Wooden Greenhouse Build

Menu


Categories


Archive

Chisel Wood Door Hinge,Wooden Bench Pattern,woodworking class minneapolis - Test Out

23.01.2015 admin
A hinge mortise is the shallow cut made in the edge of a door and the door jamb that mirrors the size and thickness of the door hinge. Hinge mortises on a door are often cut by machine with a router and straight bit, but you can cut mortises by hand using a hammer and chisel as well. Position the chisel on the scored line with the chisel perpendicular to the door or jamb and the bevel side of the chisel facing toward the mortise.
Lightly tap the chisel with a hammer around the perimeter of the mortise to deepen the scored line. Hold the chisel flat and use it to clean out the waste, so the mortise is the same depth as the hinge. Screw the hinge to the door and jamb, so the top of the hinge is flush with the door edge and door jamb. Danny Lipford: Now, installing a door at your house is fairly easy, but to recess hinges like this is a little more of a challenge.


Take half and line it up at a hinge mark, knuckles toward the outswinging door face and its straight side ⅛ inch from the edge.
DOOR Measure the width of your opening, jamb to jamb, in three places (top, middle,bottom) and the height, threshold to jamb, in three places.
The hinge mortise allows the hinge to be mounted flush with the jamb and door so the door will close properly. Just remember to keep the bevel end of the chisel facing toward the waste area, so you wind up with a nice, crisp line. Carefully make a series of cuts, or kerfs, between the scored lines with a chisel and mallet. Screw the hinge directly to the edge of the door, and then mark its outline with a utility knife. And then hold the chisel perfectly vertical, and make a series of cuts about an eighth-inch apart all the way across the waste area.


Then hold the hinge edge against the face of the door under the outline and draw a line under it. Sighting the chisel from the door face, tap lightly until each cut is at the depth of the guide lines. Before buying a mortise lock, make sure the distance from the spindle hole to the keyhole matches the one on the backplate you choose, and that the lock body isn't too thick to fit your door.
HINGESYou will likely need three to hanadle the weight of a solid-wood door or solid-core door.



Oils For Wooden Chopping Boards
Danish Modern Coffee Table Plans
Woodworking Saws List
Discount Woodworking Tools

Rubric: Printable Woodworking Plans



Comments

  1. ILQAR007 writes:
    Disappear so it's a smart idea to print variety.
  2. BAKILI_BMV writes:
    Going to take you thru the method of turning detailed and accurate woodworking plans for.