08 May. 1992|
Turning pen kits,single plant grow light,free wood toys patterns,portable writing desk plans free - Review
This complete 1MT Pen turning kit contains all the tools you need to start pen turning including 5 gold coloured 7mm diameter pens. The collet that secures the mounting shaft insures that the shaft is locked and centered in position to guarantee a perfectly centred pen.
The shaft slides inside the collet so that it can be lengthened or shortened to adapt to the length of the pen to be made. The kit consists of 7mm HSS drill bit, pen tube insertion tool, barrel trimming tool, collet type pen mandrel, bushing set for 7mm pens, tapered bushing set for 7-10mm pens, finishing wax, 5 x gold coloured twist pen kits and a storage case.
The Rotur pen turning kit is a complete package to get started in the hobby of pen turning.
The adhesives are used to glue the pen tubes inside the pen blanks and are also a very popular choice for finishing your pens. Finishes used for pen turning can be very irritating to the nose and throat when being applied. Turning these blanks in various shapes and styles make each pen unique and is really limited to your imagination.
Using the following products below during the turning process will help to keep flying wood out of your face, sanding dust and finish fumes out of your lungs. The nice thing about the various blanks is that even if you turn multiple pens out of the same type and batch of blanks, each one will turn out differently.
Wood pens are usually sanded from 150 grit up to 400 or 600 grit, depending on your finish type. Three each of two different types of spacers are profided to separate the pen parts from each other on the mandrel and from the ends of the mandrel, so that you can turn the pen parts without fear of your turning tool hitting anything.
Acrylic pens are usually sanded up to 12000 grit, using micro mesh (see below) before finishing.