13 Jun. 1999|
Plans table saw outfeed table,reverse flow cabinet smoker plans,basic wood table plans - How to DIY
Self reliance in woodworking means you don’t have to call your spouse or kids to hold those long, dangly boards as they come off your table saw. 11 Assembly Table Plans: Putting it All Together with Glue Up Tables, Torsion Boxes, Clamp Stations and More! This collection of 15 free table saw out feed plans puts YOU in CONTROL of your sheet goods and extra long ripping projects (like the guy ripping kayak strips in the video WAY down at the bottom). In this article I’d like to share a design that I created for an outfeed table that matches my Delta Unisaw.Outfeed Table Design FeaturesMy shop is limited on floor space so every inch really does count. If the table is higher at all it could cause a nasty kickback.Storage – Last but certainly not least is storage.
I calculated the height of the table to match the table saw and then subtracted 1 inch (so I could install adjustable leg supports for fine tuning the table height). I do this to avoid any chance of wood on the table saw hitting the leading edge of the outfeed table and causing a binding situation.
I set the depth just wide enough to allow me to rip an 8 foot long piece of plywood and have the center of gravity still on the table. First and foremost I was trying to match the side table on my Delta Unisaw which came standard with a black laminate top.
Secondly, laminate is very tough and able to withstand the beating this table will take in the shop.
When you push a miter gauge (or other jig with T-Bars) forward towards the outfeed table it would eventually hit the outfeed table.
To maximize the flexibility in the assembly table I installed two lengths of Rockler Universal T-Track. I plan on lining the two jaws with some harwood.Project Cost and TimeThis project cost about $300 to build with the exception of the vise.