When you connect to the board using AutoConnect, AppZone C compares the library version to the firmware installed on the module. If the libraries have a higher version than the firmware, AppZone C displays a message.
To update the firmware version:
1. In the Target Firmware Check window, click Download latest version. AppZone C downloads the latest firmware.
If you want to update the firmware version at a later time, view the location of the firmware. You can use XFP at any time to flash the new firmware.
2. To flash the new firmware, click Flash Firmware. The Xfp window opens.
3. Follow the instructions in the window, based on your type of module, and then click Program.