Build curved garden bridge,small wood cnc machines,building plans for wood storage sheds,plywood table plans - Test Out

This is an 8′ Cedar garden bridge I built in my shop for my own back yard as part of an ongoing landscaping project. I built a bending jig in the shop for making the two curved beams to support the garden bridge deck. I bolted short Cedar 4×4 posts on the side of the garden bridge for the rails and then added some post caps that I picked up at Home depot.
The finished bridge was a lot lighter than I thought it was going to be, with two of us easily carrying it out to the back yard. Building a garden bridge is a straight-forward process, provided you use proper plans and materials for your needs.
If you need a shorter or longer garden bridge, you could adjust the size of the components as to fit your tastes. In order to get the job done like a professional, you should also build the rest of the components: the handrails, the rail and the post. Smart Tip: Use 2x2s to build the posts, but you should remember that you have to place two of them in the center, as we will show you in the step by step guide.
After you have installed the treads, your garden bridge should look similar to the one in the image.

Next, you have to build the components of the railings, if you want to add a dramatic effect to your wooden garden bridge. Connecting the elements of the railings together and attaching them to the bridge are straight forward processes, if you have cut them at the right dimensions. Afterwards, you have to sand the garden bridge with medium-grit sandpaper and apply several coats of varnish to protect it against wood decay and water damage. Thank you for reading our article about garden bridge plansĀ and we recommend you to check out the rest of our projects.
Even if you don’t have a stream on your backyard, the garden bridge will enhance the rustic look and add value to your property.
As to build the handrails, you should cut them from 2×12 beams, in the same manner as described above. As you can easily notice, building an arched bridge is not a complex job, if you use the right materials, tools and techniques for your needs and tastes. Nevertheless, if you want to keep things simple, you could use the bridge without installing the railings. After looking at what seemed like millions of of landscaping pictures on the web, we decided that we needed a garden bridge.

The building techniques are straight forward and you also don’t need too much materials to get the job done.
After you have completed the project, we recommend you to apply several coats of protective varnish all over the garden bridge, to avoid water damage or wood decay. If you want to get a steeper curve, you could build the stringers from more components, although it takes longer. Leave about 15” from the end of the boards, to support the weight of the bridge properly. But of course always making more work for myself than I really need to, I decided it had to be a curved garden bridge. I poured the tubes full of concrete mix and placed a 4×4 post anchor in the top of each post to anchor to the garden bridge beams.
In this step by step article we show you how to cut the stringers, how to make the railings and how to build the garden bridge, along with the rest of the woodworking techniques required to get the complete the project.

Making a garden bench
Bicycle shed uk
Spice rack plans woodworking
Building permit for shed calgary

Comments to «Build curved garden bridge»

  1. 05.05.2014 at 17:33:17

    narin_yagish writes:
    Ensure your roller-skates are geared up with are perfectly happy with.
  2. 05.05.2014 at 14:42:36

    Sayka writes:
    Been searching for some suggestions once we remodeled our kitchen diy shed, Diy.