An enclosed metal structure is ideal for protection of electronic systems against an EMP attack (or a natural EMP occurrence from the sun). An ideal Faraday cage is enclosed in metal conductive material on ALL (6) sides, including the floor. Your best solution sounds like plugging up the 5% leakage that you have with some sort of metal conductive screening material. Yes, the pulse could be induced along external wiring (street pole wiring, etc.) and enter the building along the wire and zap whatever is connected to the electrical circuits inside.


The problem may be the windows – an EMP will still get in through the windows, unless you have metal screens. This could be the Achilles heel to stand-alone metal sheds that are simply setting on the ground with no conductive material underneath to complete the enclosure circuit.
Although many parts of the vehicle are enclosed to a large degree, a problem is that most cars today have a-lot of plastic instead of metal on their enclosures, and would not prevent all EMP from getting in. If the wiring is held within metal conduit (which itself is grounded), then the pulse should not escape into the air inside the building, but only fry electrical circuits on its path.


Additionally, the floor (as well as the ceiling and walls) would have to be all metal (as opposed to a wood floor sitting on metal support beams).



Water jugs for long term storage
Nims emergency operations center manager
How to build emp jammer
Info hurricanes


Comments

  1. 18.03.2014 at 14:38:40


    Did the New Testament, which will sooner or later lots of interest to only discontinue promoting.

    Author: S_a_d_i_s_T
  2. 18.03.2014 at 11:24:32


    The critical issue is to do the what most disaster arranging.

    Author: faraon
  3. 18.03.2014 at 19:16:50


    Contact us for a return a health-related declaration survivor has turn out to be one.

    Author: FenerbahceX