Two capacities available: The 32" (810mm)-capacity TS-LS is based on a 72" Rail length, and the 52" (1320mm)-capacity system uses 92" Rails. The quick-release feature allows the positioner's base assembly to be slid anywhere along the rails to access a router table, and the whole system lifts off the rails in seconds for total access to the saw's work surface or to reverse the system for ripping on the left side of the blade. This item will be sent through the Global Shipping Programme and includes international tracking. By clicking Confirm bid, you are committing to buy this item from the seller if you are the winning bidder and have read and agree to the Global Shipping Programme terms and conditions - opens in a new window or tab.
By clicking 1 Click Bid, you are agreeing to buy this item from the seller if you're the winning bidder.
Add our steel router table installation hardware (TSRTHW) as an accessory to save yourself the time and effort of fabricating your own method of attaching your router table to the INCRA TS Rails. INCRA's TS-LS System was one of only two fence systems to earn top scores for alignment against the blade and lack of deflection in Wood Magazine's May 2004 Rip Fence Test. The quick-release feature allows the positioner's base assembly to be positioned anywhere along the length of the rails to access a router table in any position, and the base assembly can removed in seconds, giving you total access to the saw's surface.
The INCRA TS-LS will fit directly on just about any standard 10" table saw, typically without any drilling or tapping. The INCRA TS-LS offers the one thing that every table saw fence should have, but none of them do, namely, Automatic Positioning Control.
The standard Mount Unit (LS32-TS-WF) handles saws measuring 28" or smaller front-to-rear (along the miter slot). Both systems use the same LS32 Positioner, and quick-release knobs allow the positioner's base assembly to be shifted further from the saw blade on the 52" system's longer rails to achieve the greater capacitt.


Both systems use the same LS32 Positioner, and quick-release knobs allow the positioner's base assembly to be shifted further from the saw blade on the 52" system's longer rails to achieve the greater capacity.
Three pairs of stops on the rails guarantee that the fence system stays perfectly aligned and calibrated each time it’s moved. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. By clicking Confirm bid you commit to buy this item from the seller if you are the winning bidder.
Import charges previously quoted are subject to change if you increase you maximum bid amount.
And since the mike is lead screw-based and reads directly in thousandths of an inch, it's repeatable as well. Perfect alignment relative to the blade is guaranteed by the system's low friction and by the carriage lock's tremendous pressure across the sliding carriage, not unlike a traditional T-square style rip fences. The standard Mount Unit (LS52-TS) handles saws measuring 28" or smaller front-to-rear (along the miter slot). Both systems use the same LS32 Positioner, and quick-release knobs allow the positioner's base assembly to be shifted further from the saw blade on the 52" system's longer rails to achieve the greater capacitt.
The quick release also allows the base assembly to be reversed on the rails to allow about 14" (350mm) of ripping capacity to the left of the blade.
The Primary scale adjusts on a magnetic track in the first channel to indicate distance from the cutter. Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error.


The TS Rail Support Legs are standard equipment on the 52" System.The quick-release feature allows the positioner's base assembly to be slid anywhere along the rails to access a router table, and the whole system lifts off the rails in seconds for total access to the saw's work surface or to reverse the system for ripping on the left side of the blade. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable.
This micro adjust is entirely different from the random, slow-motion knobs used on rip fences in the past. The fence can be initially aligned parallel to the miter slot, slightly "relieved" on the outfeed end, or anywhere in between. After the fence and base assembly has been removed from the rails or repositioned, three pairs of stops on the rails guarantee that the fence system stays perfectly aligned and calibrated, time after time. These surfaces must be flat and square to the top, with at least two holes in each surface. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. Hole locations and diameter are unimportant because INCRA's universal rail mounting brackets will work with any hole pattern and a wide variety of hole sizes.



Which sliding mitre saw is best 5.4
Second hand tools new zealand jobs
Kobalt drill bits review




Comments to «Incra ts-ls table saw fence - 32»

  1. Romeo777 writes:
    Progression I would like to see how.
  2. ANILSE writes:
    And reliable multi tool line that you intend incra ts-ls table saw fence - 32 to totally use all wanted to test the anit-kickback.
  3. lady_of_night writes:
    Brute energy and Makita's constantly skilled.
  4. GemliGiz writes:
    For long lasting life and why not be totally clear in the.
  5. dj_ram_georgia writes:
    Whilst these new tools are not excellent, all round delivery got the far better.


2015 Electrical hand tool set organizer | Powered by WordPress