Package evaluation to load GalacticMetaheuristics on Julia 1.14.0-DEV.2373 (cf67ecc88f*) started at 2026-06-13T23:19:01.249 ################################################################################ # Set-up # Set-up completed after 0.12s ################################################################################ # Installation # Installing GalacticMetaheuristics... Resolving package versions... Installed Rmath_jll ────────────────────── v0.5.1+0 Installed DiffResults ──────────────────── v1.1.0 Installed FillArrays ───────────────────── v0.13.11 Installed CommonSolve ──────────────────── v0.2.7 Installed SnoopPrecompile ──────────────── v1.0.3 Installed DataStructures ───────────────── v0.19.5 Installed MacroTools ───────────────────── v0.5.16 Installed AbstractTrees ────────────────── v0.4.5 Installed Adapt ────────────────────────── v3.7.2 Installed ConstructionBase ─────────────── v1.6.0 Installed JMcDM ────────────────────────── v0.7.24 Installed RuntimeGeneratedFunctions ────── v0.5.19 Installed AliasTables ──────────────────── v1.1.3 Installed HypergeometricFunctions ──────── v0.3.28 Installed ArrayInterfaceStaticArraysCore ─ v0.1.4 Installed ExprTools ────────────────────── v0.1.10 Installed IteratorInterfaceExtensions ──── v1.0.0 Installed OrderedCollections ───────────── v1.8.2 Installed Combinatorics ────────────────── v1.1.0 Installed StatsBase ────────────────────── v0.34.11 Installed FunctionWrappersWrappers ─────── v0.1.3 Installed Compat ───────────────────────── v4.18.1 Installed RecipesBase ──────────────────── v1.3.4 Installed DataAPI ──────────────────────── v1.16.0 Installed ConsoleProgressMonitor ───────── v0.1.2 Installed Statistics ───────────────────── v1.11.1 Installed ProgressLogging ──────────────── v0.1.6 Installed DataValueInterfaces ──────────── v1.0.0 Installed StatsAPI ─────────────────────── v1.8.0 Installed LoggingExtras ────────────────── v0.4.9 Installed PrecompileTools ──────────────── v1.3.4 Installed GPUArraysCore ────────────────── v0.1.5 Installed Distances ────────────────────── v0.10.12 Installed ProgressMeter ────────────────── v1.11.0 Installed StaticArraysCore ─────────────── v1.4.4 Installed IrrationalConstants ──────────── v0.2.6 Installed TerminalLoggers ──────────────── v0.1.7 Installed QuadGK ───────────────────────── v2.11.3 Installed ChainRulesCore ───────────────── v1.26.1 Installed SearchSpaces ─────────────────── v0.2.0 Installed OpenSpecFun_jll ──────────────── v0.5.6+0 Installed FunctionWrappers ─────────────── v1.1.3 Installed LogExpFunctions ──────────────── v1.0.1 Installed LeftChildRightSiblingTrees ───── v0.2.1 Installed Requires ─────────────────────── v1.3.1 Installed SciMLBase ────────────────────── v1.81.0 Installed Metaheuristics ───────────────── v3.5.0 Installed StatsFuns ────────────────────── v2.1.0 Installed Rmath ────────────────────────── v0.9.0 Installed Tables ───────────────────────── v1.12.1 Installed GalacticOptim ────────────────── v3.4.0 Installed Distributions ────────────────── v0.25.126 Installed GalacticMetaheuristics ───────── v0.1.0 Installed Reexport ─────────────────────── v1.2.2 Installed Missings ─────────────────────── v1.2.0 Installed PtrArrays ────────────────────── v1.4.0 Installed SpecialFunctions ─────────────── v2.8.0 Installed TableTraits ──────────────────── v1.0.1 Installed EnumX ────────────────────────── v1.0.7 Installed ZygoteRules ──────────────────── v0.2.7 Installed ArrayInterfaceCore ───────────── v0.1.29 Installed PDMats ───────────────────────── v0.11.37 Installed SortingAlgorithms ────────────── v1.2.2 Installed Preferences ──────────────────── v1.5.2 Installed RecursiveArrayTools ──────────── v2.32.3 Installed JLLWrappers ──────────────────── v1.8.0 Installed DocStringExtensions ──────────── v0.8.6 Installing 2 artifacts Installed artifact OpenSpecFun 194.9 KiB Installed artifact Rmath 121.9 KiB Updating `~/.julia/environments/v1.14/Project.toml` [ea53b4ef] + GalacticMetaheuristics v0.1.0 Updating `~/.julia/environments/v1.14/Manifest.toml` [1520ce14] + AbstractTrees v0.4.5 ⌅ [79e6a3ab] + Adapt v3.7.2 [66dad0bd] + AliasTables v1.1.3 [30b0a656] + ArrayInterfaceCore v0.1.29 [dd5226c6] + ArrayInterfaceStaticArraysCore v0.1.4 [d360d2e6] + ChainRulesCore v1.26.1 [861a8166] + Combinatorics v1.1.0 [38540f10] + CommonSolve v0.2.7 [34da2185] + Compat v4.18.1 [88cd18e8] + ConsoleProgressMonitor v0.1.2 [187b0558] + ConstructionBase v1.6.0 [9a962f9c] + DataAPI v1.16.0 [864edb3b] + DataStructures v0.19.5 [e2d170a0] + DataValueInterfaces v1.0.0 [163ba53b] + DiffResults v1.1.0 [b4f34e82] + Distances v0.10.12 [31c24e10] + Distributions v0.25.126 ⌅ [ffbed154] + DocStringExtensions v0.8.6 [4e289a0a] + EnumX v1.0.7 [e2ba6199] + ExprTools v0.1.10 ⌅ [1a297f60] + FillArrays v0.13.11 [069b7b12] + FunctionWrappers v1.1.3 ⌅ [77dc65aa] + FunctionWrappersWrappers v0.1.3 ⌅ [46192b85] + GPUArraysCore v0.1.5 [ea53b4ef] + GalacticMetaheuristics v0.1.0 [a75be94c] + GalacticOptim v3.4.0 [34004b35] + HypergeometricFunctions v0.3.28 [92d709cd] + IrrationalConstants v0.2.6 [82899510] + IteratorInterfaceExtensions v1.0.0 [692b3bcd] + JLLWrappers v1.8.0 ⌅ [358108f5] + JMcDM v0.7.24 ⌅ [1d6d02ad] + LeftChildRightSiblingTrees v0.2.1 [2ab3a3ac] + LogExpFunctions v1.0.1 ⌅ [e6f89c97] + LoggingExtras v0.4.9 [1914dd2f] + MacroTools v0.5.16 [bcdb8e00] + Metaheuristics v3.5.0 [e1d29d7a] + Missings v1.2.0 ⌅ [bac558e1] + OrderedCollections v1.8.2 [90014a1f] + PDMats v0.11.37 [aea7be01] + PrecompileTools v1.3.4 [21216c6a] + Preferences v1.5.2 [33c8b6b6] + ProgressLogging v0.1.6 [92933f4c] + ProgressMeter v1.11.0 [43287f4e] + PtrArrays v1.4.0 [1fd47b50] + QuadGK v2.11.3 [3cdcf5f2] + RecipesBase v1.3.4 ⌅ [731186ca] + RecursiveArrayTools v2.32.3 [189a3867] + Reexport v1.2.2 [ae029012] + Requires v1.3.1 [79098fc4] + Rmath v0.9.0 [7e49a35a] + RuntimeGeneratedFunctions v0.5.19 ⌅ [0bca4576] + SciMLBase v1.81.0 [eb7571c6] + SearchSpaces v0.2.0 [66db9d55] + SnoopPrecompile v1.0.3 [a2af1166] + SortingAlgorithms v1.2.2 [276daf66] + SpecialFunctions v2.8.0 [1e83bf80] + StaticArraysCore v1.4.4 [10745b16] + Statistics v1.11.1 [82ae8749] + StatsAPI v1.8.0 [2913bbd2] + StatsBase v0.34.11 [4c63d2b9] + StatsFuns v2.1.0 [3783bdb8] + TableTraits v1.0.1 [bd369af6] + Tables v1.12.1 [5d786b92] + TerminalLoggers v0.1.7 [700de1a5] + ZygoteRules v0.2.7 [efe28fd5] + OpenSpecFun_jll v0.5.6+0 [f50d1b31] + Rmath_jll v0.5.1+0 [0dad84c5] + ArgTools v1.2.0 [56f22d72] + Artifacts v1.11.0 [2a0f44e3] + Base64 v1.11.0 [ade2ca70] + Dates v1.11.0 [8ba89e20] + Distributed v1.11.0 [f43a241f] + Downloads v1.7.0 [7b1f6079] + FileWatching v1.11.0 [ac6e5ff7] + JuliaSyntaxHighlighting v1.13.0 [b27032c2] + LibCURL v1.0.0 [76f85450] + LibGit2 v1.11.0 [8f399da3] + Libdl v1.11.0 [37e2e46d] + LinearAlgebra v1.14.0 [56ddb016] + Logging v1.11.0 [d6f4376e] + Markdown v1.11.0 [ca575930] + NetworkOptions v1.3.0 [44cfe95a] + Pkg v1.14.0 [de0858da] + Printf v1.11.0 [9a3f8284] + Random v1.11.0 [ea8e919c] + SHA v1.13.0 [9e88b42a] + Serialization v1.11.0 [6462fe0b] + Sockets v1.11.0 [2f01184e] + SparseArrays v1.13.0 [f489334b] + StyledStrings v1.13.0 [4607b0f0] + SuiteSparse [fa267f1f] + TOML v1.0.3 [a4e569a6] + Tar v1.10.0 [cf7118a7] + UUIDs v1.11.0 [4ec0a83e] + Unicode v1.11.0 [e66e0078] + CompilerSupportLibraries_jll v1.5.2+0 [deac9b47] + LibCURL_jll v8.20.0+1 [e37daf67] + LibGit2_jll v1.9.4+0 [29816b5a] + LibSSH2_jll v1.11.101+0 [14a3606d] + MozillaCACerts_jll v2026.5.14 [4536629a] + OpenBLAS_jll v0.3.33+0 [05823500] + OpenLibm_jll v0.8.7+0 [458c3c95] + OpenSSL_jll v3.5.7+0 [efcefdf7] + PCRE2_jll v10.47.0+0 [bea87d4a] + SuiteSparse_jll v7.10.1+0 [83775a58] + Zlib_jll v1.3.2+0 [3161d3a3] + Zstd_jll v1.5.7+1 [8e850b90] + libblastrampoline_jll v5.15.0+0 [8e850ede] + nghttp2_jll v1.69.0+0 [3f19e933] + p7zip_jll v17.8.0+0 Info Packages marked with ⌅ have new versions available but compatibility constraints restrict them from upgrading. To see why use `status --outdated -m` Installation completed after 13.7s ################################################################################ # Precompilation # Precompiling PkgEval dependencies... Project No packages added to or removed from `~/.julia/environments/pkgeval/Project.toml` Manifest No packages added to or removed from `~/.julia/environments/pkgeval/Manifest.toml` Precompiling package dependencies... Precompiling project... 3.9 s ✓ MacroTools 0.6 s ✓ Reexport 1.0 s ✓ Statistics 1.0 s ✓ DataAPI 1.1 s ✓ ConstructionBase 2.3 s ✓ IrrationalConstants 0.5 s ✓ DataValueInterfaces 0.9 s ✓ StaticArraysCore 0.6 s ✓ StatsAPI 130.5 s ✓ OrderedCollections 38.8 s ✓ FunctionWrappers 61.0 s ✓ AbstractTrees 2.0 s ✓ Combinatorics 0.9 s ✓ EnumX 0.8 s ✓ ExprTools 32.5 s ✓ PtrArrays 0.6 s ✓ CommonSolve 0.5 s ✓ IteratorInterfaceExtensions 1.2 s ✓ Requires 34.6 s ✓ ProgressLogging 37.5 s ✓ PDMats 51.0 s ✓ ProgressMeter 2.4 s ✓ LoggingExtras 34.6 s ✓ DocStringExtensions 1.4 s ✓ Compat 2.3 s ✓ Preferences 35.8 s ✓ Statistics → SparseArraysExt 47.9 s ✓ Missings 0.6 s ✓ ConstructionBase → ConstructionBaseLinearAlgebraExt 0.9 s ✓ DiffResults 1.8 s ✓ Distances 145.8 s ✓ DataStructures 31.7 s ✓ FunctionWrappersWrappers 45.9 s ✓ LeftChildRightSiblingTrees 1.4 s ✓ SearchSpaces 1.0 s ✓ RuntimeGeneratedFunctions 34.9 s ✓ AliasTables 0.5 s ✓ TableTraits 0.9 s ✓ Adapt 101.9 s ✓ JMcDM 34.8 s ✓ ConsoleProgressMonitor 34.8 s ✓ LogExpFunctions 0.6 s ✓ Compat → CompatLinearAlgebraExt 2.9 s ✓ JLLWrappers 2.5 s ✓ SnoopPrecompile 2.6 s ✓ PrecompileTools 88.2 s ✓ FillArrays 34.4 s ✓ Distances → DistancesSparseArraysExt 32.9 s ✓ SortingAlgorithms 35.1 s ✓ QuadGK 71.6 s ✓ TerminalLoggers 129.6 s ✓ Tables 1.2 s ✓ GPUArraysCore 268.9 s ✓ ChainRulesCore 3.1 s ✓ Rmath_jll 3.1 s ✓ OpenSpecFun_jll 67.1 s ✓ ArrayInterfaceCore 4.3 s ✓ RecipesBase 148.6 s ✓ StatsBase 49.8 s ✓ ChainRulesCore → ChainRulesCoreSparseArraysExt 36.2 s ✓ ZygoteRules 34.6 s ✓ Distances → DistancesChainRulesCoreExt 67.5 s ✓ LogExpFunctions → LogExpFunctionsChainRulesCoreExt 2.8 s ✓ Rmath 114.2 s ✓ SpecialFunctions 33.1 s ✓ ArrayInterfaceStaticArraysCore 65.4 s ✓ PDMats → StatsBaseExt 63.9 s ✓ SpecialFunctions → SpecialFunctionsChainRulesCoreExt 35.7 s ✓ HypergeometricFunctions 148.7 s ✓ RecursiveArrayTools 34.6 s ✓ StatsFuns ERROR: LoadError: LoweringError: #= /home/pkgeval/.julia/packages/EnumX/CGSQY/src/EnumX.jl:122 =# - Expected module name Expression:  (escape ReturnCode) Containing expressions:  (module false (escape ReturnCode) (block (primitive (<: T (curly Enum Int32)) 32) (let (= value_name_map Dict{Int32, Symbol}(3 => :DtNaN, 2 => :Terminated, 6 => :Unstable, 5 => :DtLessThanMin, 4 => :MaxIters, 1 => :Success, 13 => :Infeasible, 8 => :ConvergenceFailure, 7 => :InitialFailure, 10 => :ExactSolutionLeft, 14 => :MaxTime, 12 => :FloatingPointLimit, 11 => :ExactSolutionRight, 9 => :Failure, 0 => :Default)) (block (= (call check_valid x) (block (|| (call in x (call keys value_name_map)) (call throw (call ArgumentError (string "invalid value for Enum " (inert ReturnCode) ": " x ".")))))) (global (function (call (escape T) (:: x Integer)) (block (call check_valid x) (return (call (. Base (inert bitcast)) (escape T) (call convert Int32 x)))))) (= (call (. (. Base (inert Enums)) (inert namemap)) (:: (curly (. Base (inert Type)) (escape T)))) (block value_name_map)) (= (call (. (. Base (inert Enums)) (inert instances)) (:: (curly (. Base (inert Type)) (escape T)))) (block (tuple (escape Default) (escape Success) (escape Terminated) (escape DtNaN) (escape MaxIters) (escape DtLessThanMin) (escape Unstable) (escape InitialFailure) (escape ConvergenceFailure) (escape Failure) (escape ExactSolutionLeft) (escape ExactSolutionRight) (escape FloatingPointLimit) (escape Infeasible) (escape MaxTime)))) (= (call (. EnumX (inert symbol_map)) (:: (curly (. Base (inert Type)) (escape T)))) (block Pair{Symbol, Int32}[:Default => 0, :Success => 1, :Terminated => 2, :DtNaN => 3, :MaxIters => 4, :DtLessThanMin => 5, :Unstable => 6, :InitialFailure => 7, :ConvergenceFailure => 8, :Failure => 9, :ExactSolutionLeft => 10, :ExactSolutionRight => 11, :FloatingPointLimit => 12, :Infeasible => 13, :MaxTime => 14])))) (escape (public T Default Success Terminated DtNaN MaxIters DtLessThanMin Unstable InitialFailure ConvergenceFailure Failure ExactSolutionLeft ExactSolutionRight FloatingPointLimit Infeasible MaxTime)) (const (= (escape Default) (call (escape T) 0))) (const (= (escape Success) (call (escape T) 1))) (const (= (escape Terminated) (call (escape T) 2))) (const (= (escape DtNaN) (call (escape T) 3))) (const (= (escape MaxIters) (call (escape T) 4))) (const (= (escape DtLessThanMin) (call (escape T) 5))) (const (= (escape Unstable) (call (escape T) 6))) (const (= (escape InitialFailure) (call (escape T) 7))) (const (= (escape ConvergenceFailure) (call (escape T) 8))) (const (= (escape Failure) (call (escape T) 9))) (const (= (escape ExactSolutionLeft) (call (escape T) 10))) (const (= (escape ExactSolutionRight) (call (escape T) 11))) (const (= (escape FloatingPointLimit) (call (escape T) 12))) (const (= (escape Infeasible) (call (escape T) 13))) (const (= (escape MaxTime) (call (escape T) 14))) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:34 =#) "`ReturnCode.Default`\n\nThe default state of the solver. If this return code is given, then the solving\nprocess is either still in process or the solver library has not been setup\nwith the return code interface and thus the return code is undetermined.\n\n## Common Reasons for Seeing this Return Code\n\n* A common reason for `Default` return codes is that a solver is a non-SciML solver\n which does not fully conform to the interface. Please open an issue if this is seen\n and it will be improved.\n* Another common reason for a `Default` return code is if the solver is probed\n internally before the solving process is done, such as through the callback interface.\n Return codes are set to `Default` to start and are changed to `Success` and other\n return codes upon finishing the solving process or hitting a numerical difficulty.\n\n## Properties\n\n* successful_retcode = false\n" Default) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:57 =#) "`ReturnCode.Success`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, but no extra information about that success is given.\n\n## Common Reasons for Seeing this Return Code\n\n* This is the most common return code and most solvers will give this return code if\n the solving process went as expected without any errors or detected numerical issues.\n\n## Properties\n\n* successful_retcode = true\n" Success) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:74 =#) "`ReturnCode.Terminated`\n\nThe successful termination state of the solver. If this return code is given,\nthen the solving process was successful at terminating the solve, usually\nthrough a callback `affect!` via `terminate!(integrator)`.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is if a user calls a callback which\n uses `terminate!(integrator)` to halt the integration at a user-chosen stopping point.\n* Another common reason for this return code is due to implicit `terminate!` statements\n in some library callbacks. For example, `SteadyStateCallback` uses `terminate!`\n internally, so solutions which reach steady state will have a `ReturnCode.Terminated`\n state instead of a `ReturnCode.Success` state. Similarly, problems solved via\n SteadyStateDiffEq.jl will have this `ReturnCode.Terminated` state if a timestepping\n method is used to solve to steady state.\n\n## Properties\n\n* successful_retcode = true\n" Terminated) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:98 =#) "`ReturnCode.DtNaN`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the `dt` of the\nintgration was determined to be `NaN` and thus the solver could not continue.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the automatic `dt`\n selection algorithm is used but the starting derivative has a `NaN` or `Inf`\n derivative term. Double check that the `f(u0,p,t0)` term is well-defind without\n `NaN` or `Inf` values.\n* Another common reason for this return code is because of a user set `dt` which is\n calculated to be a `NaN`. If `solve(prob,alg,dt=x)`, double check that `x` is not\n `NaN`.\n\n## Properties\n\n* successful_retcode = false\n" DtNaN) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:121 =#) "`ReturnCode.MaxIters`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the solver's\niterations hit the `maxiters` either set by default or by the user in the\n`solve`/`init` command.\n\n## Note about Nonlinear Optimization\n\nIn nonlinear optimization, many solvers (such as `OptimizationOptimisers.Adam`) do not\nhave an exit criteria other than `iters == maxiters`. In this case, the solvers will\niterate until `maxiters` and exit with a `Success` return code, as that is a successful\nrun of the solver and not considered to be an error state. Solves with early termination\ncritera, such as `Optim.BFGS` exiting when the gradient is sufficiently close to zero,\nwill give `ReturnCode.MaxIters` on exits which require the maximum iteration.\n\n## Common Reasons for Seeing this Return Code\n\n* This commonly occurs in ODE solving if a non-stiff method (e.g. `Tsit5`) is used in\n an algorithm choice for a stiff ODE. It is recommended that in such cases, one tries a\n stiff ODE solver.\n* This commonly occurs in optimization and nonlinear solvers if the tolerance on `solve`\n to too low and cannot be achieved due to floating point error or the condition number\n of the solver matrix. Double check that the chosen tolerance is numerically possible.\n\n## Properties\n\n* successful_retcode = false\n" MaxIters) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:153 =#) "`ReturnCode.DtLessThanMin`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the `dt` of the\nintgration was made to be less than `dtmin`, i.e. `dt < dtmin`.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the the integration\n is going unstable. As `f(u,p,t) -> infinity`, the time steps required by the solver\n to accurately handle the dynamics decreases. When it gets sufficiently small, `dtmin`,\n an exit is thrown as the solution is likely unstable. `dtmin` is also chosen to be\n around the value where floating point issues cause `t + dt == t`, and thus a `dt`\n of that size is impossible at floating point precision.\n* Another common reason for this return code is if domain constraints are set, such as\n by using `isoutofdomain`, but the domain constraint is incorrect. For example, if\n one is solving the ODE `f(u,p,t) = -u - 1`, one may think \"but I want a solution with\n `u > 0` and thus I will set `isoutofdomain(u,p,t) = u < 0`. However, the true solution\n of this ODE is not positive, and thus what will occur is that the solver will try to\n decerase `dt` until it can give an accurate solution that is positive. As this is\n impossible, it will continue to shrink the `dt` until `dt < dtmin` and then exit with\n this return code.\n\n## Properties\n\n* successful_retcode = false\n" DtLessThanMin) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:183 =#) "`ReturnCode.Unstable`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the `unstable_check`\nfunction, as given by the `unstable_check` common keyword argument (or its default),\ngive a `true` at the current state.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because `u` contains a `NaN`\n or `Inf` value. The default `unstable_check` only checks for these values.\n\n## Properties\n\n* successful_retcode = false\n" Unstable) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:202 =#) "`ReturnCode.InitialFailure`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful because the initialization process failed.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the initialization\n process of a DAE solver failed to find consistent initial conditions, which can\n occur if the differentiation index of the DAE solver is too high. Most DAE solvers\n only allow for index-1 DAEs, and so an index-2 DAE will fail during this\n initialization. To solve this kind of problem, use `ModelingToolkit.jl` and its\n `structural_simplify` method to reduce the index of the DAE.\n* Another common reason for this return code is if the initial condition was not\n suitable for the numerical solve. For example, the initial point had a `NaN` or `Inf`.\n Or in optimization, this can occur if the initial point is outside of the bound\n constraints given by the user.\n\n## Properties\n\n* successful_retcode = false\n" InitialFailure) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:227 =#) "`ReturnCode.ConvergenceFailure`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful because internal nonlinear solver iterations\nfailed to converge.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because an inappropriate\n nonlinear solver was chosen. If fixed point iteration is used on a stiff problem,\n it will be faster by avoiding the Jacobian but it will make a stiff ODE solver not\n stable for stiff problems!\n\n## Properties\n\n* successful_retcode = false\n" ConvergenceFailure) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:247 =#) "`ReturnCode.Failure`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful but no extra information is given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the solver is a wrapped\n solver (i.e. a Fortran code) which does not provide any extra information about its\n exit state. If this is from a Julia-based solver, please open an issue.\n\n## Properties\n\n* successful_retcode = false\n" Failure) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:265 =#) "`ReturnCode.ExactSolutionLeft`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, and the left solution was given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for this return code is via a bracketing nonlinear solver,\n such as bisection, iterating to convergence is unable to give the exact `f(x)=0`\n solution due to floating point precision issues, and thus it gives the first floating\n point value to the left for `x`.\n\n## Properties\n\n* successful_retcode = true\n" ExactSolutionLeft) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:284 =#) "`ReturnCode.ExactSolutionRight`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, and the right solution was given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for this return code is via a bracketing nonlinear solver,\n such as bisection, iterating to convergence is unable to give the exact `f(x)=0`\n solution due to floating point precision issues, and thus it gives the first floating\n point value to the right for `x`.\n\n## Properties\n\n* successful_retcode = true\n" ExactSolutionRight) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:303 =#) "`ReturnCode.FloatingPointLimit`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, and the closest floating point value to the solution was given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for this return code is via a nonlinear solver, such as Falsi,\niterating to convergence is unable to give the exact `f(x)=0` solution due to floating\npoint precision issues, and thus it gives the closest floating point value to the\ntrue solution for `x`.\n\n## Properties\n\n* successful_retcode = true\n" FloatingPointLimit) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:322 =#) "`ReturnCode.Infeasible`\n\nThe optimization problem was proven to be infeasible by the solver.\n\n## Properties\n\n* successful_retcode = false\n" Infeasible) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:333 =#) "`ReturnCode.MaxTime`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the solver's\ntimer hit `maxtime` either set by default or by the user in the\n`solve`/`init` command.\n\n## Properties\n\n* successful_retcode = false\n" MaxTime)))  Detailed provenance:  (escape ReturnCode)  └─ (escape ReturnCode)  └─ (escape ReturnCode)  ├─ @ /home/pkgeval/.julia/packages/EnumX/CGSQY/src/EnumX.jl:122  └─ (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:1 =#) "`SciML.ReturnCode`\n\n`SciML.ReturnCode` is the standard return code enum interface for the SciML interface.\nReturn codes are notes given by the solvers to indicate the state of the solution, for\nexample whether it successfully solved the equations, whether it failed to solve the\nequations, and importantly, why it exited.\n\n## Using `SciML.ReturnCode`\n\n`SciML.ReturnCode` use the interface of [EnumX.jl](https://github.com/fredrikekre/EnumX.jl)\nand thus inherits all of the behaviors of being an EnumX. This includes the Enum type itself\nbeing referred to as `SciML.ReturnCode.T`, and each of the constituent enum states being\nreferred to via `getproperty`, i.e. `SciML.ReturnCode.Success`.\n\n## Note About Success Checking\n\nPrevious iterations of the interface suggested using `sol.retcode == :Success`, however,\nthat is now not advised instead should be replaced with `\nSciMLBase.successful_retcode(sol)`. The reason is that there are many different\ncodes that can be interpreted as successful, such as `ReturnCode.Terminated` which means\nsuccessfully used `terminate!(integrator)` to end an integration at a user-specified\ncondition. As such, `successful_retcode` is the most general way to query for if the solver\ndid not error.\n\n## Properties\n\n* `successful_retcode(retcode::ReturnCode.T)`: Determines whether the output enum is\n considered a success state of the solver, i.e. the solver successfully solved the\n equations. `ReturnCode.Success` is the most basic form, simply declaring that it was\n successful, but many more informative success return codes exist as well.\n" (macrocall (. EnumX (inert @enumx)) :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:33 =#) ReturnCode (block (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:34 =#) "`ReturnCode.Default`\n\nThe default state of the solver. If this return code is given, then the solving\nprocess is either still in process or the solver library has not been setup\nwith the return code interface and thus the return code is undetermined.\n\n## Common Reasons for Seeing this Return Code\n\n* A common reason for `Default` return codes is that a solver is a non-SciML solver\n which does not fully conform to the interface. Please open an issue if this is seen\n and it will be improved.\n* Another common reason for a `Default` return code is if the solver is probed\n internally before the solving process is done, such as through the callback interface.\n Return codes are set to `Default` to start and are changed to `Success` and other\n return codes upon finishing the solving process or hitting a numerical difficulty.\n\n## Properties\n\n* successful_retcode = false\n" Default) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:57 =#) "`ReturnCode.Success`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, but no extra information about that success is given.\n\n## Common Reasons for Seeing this Return Code\n\n* This is the most common return code and most solvers will give this return code if\n the solving process went as expected without any errors or detected numerical issues.\n\n## Properties\n\n* successful_retcode = true\n" Success) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:74 =#) "`ReturnCode.Terminated`\n\nThe successful termination state of the solver. If this return code is given,\nthen the solving process was successful at terminating the solve, usually\nthrough a callback `affect!` via `terminate!(integrator)`.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is if a user calls a callback which\n uses `terminate!(integrator)` to halt the integration at a user-chosen stopping point.\n* Another common reason for this return code is due to implicit `terminate!` statements\n in some library callbacks. For example, `SteadyStateCallback` uses `terminate!`\n internally, so solutions which reach steady state will have a `ReturnCode.Terminated`\n state instead of a `ReturnCode.Success` state. Similarly, problems solved via\n SteadyStateDiffEq.jl will have this `ReturnCode.Terminated` state if a timestepping\n method is used to solve to steady state.\n\n## Properties\n\n* successful_retcode = true\n" Terminated) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:98 =#) "`ReturnCode.DtNaN`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the `dt` of the\nintgration was determined to be `NaN` and thus the solver could not continue.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the automatic `dt`\n selection algorithm is used but the starting derivative has a `NaN` or `Inf`\n derivative term. Double check that the `f(u0,p,t0)` term is well-defind without\n `NaN` or `Inf` values.\n* Another common reason for this return code is because of a user set `dt` which is\n calculated to be a `NaN`. If `solve(prob,alg,dt=x)`, double check that `x` is not\n `NaN`.\n\n## Properties\n\n* successful_retcode = false\n" DtNaN) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:121 =#) "`ReturnCode.MaxIters`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the solver's\niterations hit the `maxiters` either set by default or by the user in the\n`solve`/`init` command.\n\n## Note about Nonlinear Optimization\n\nIn nonlinear optimization, many solvers (such as `OptimizationOptimisers.Adam`) do not\nhave an exit criteria other than `iters == maxiters`. In this case, the solvers will\niterate until `maxiters` and exit with a `Success` return code, as that is a successful\nrun of the solver and not considered to be an error state. Solves with early termination\ncritera, such as `Optim.BFGS` exiting when the gradient is sufficiently close to zero,\nwill give `ReturnCode.MaxIters` on exits which require the maximum iteration.\n\n## Common Reasons for Seeing this Return Code\n\n* This commonly occurs in ODE solving if a non-stiff method (e.g. `Tsit5`) is used in\n an algorithm choice for a stiff ODE. It is recommended that in such cases, one tries a\n stiff ODE solver.\n* This commonly occurs in optimization and nonlinear solvers if the tolerance on `solve`\n to too low and cannot be achieved due to floating point error or the condition number\n of the solver matrix. Double check that the chosen tolerance is numerically possible.\n\n## Properties\n\n* successful_retcode = false\n" MaxIters) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:153 =#) "`ReturnCode.DtLessThanMin`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the `dt` of the\nintgration was made to be less than `dtmin`, i.e. `dt < dtmin`.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the the integration\n is going unstable. As `f(u,p,t) -> infinity`, the time steps required by the solver\n to accurately handle the dynamics decreases. When it gets sufficiently small, `dtmin`,\n an exit is thrown as the solution is likely unstable. `dtmin` is also chosen to be\n around the value where floating point issues cause `t + dt == t`, and thus a `dt`\n of that size is impossible at floating point precision.\n* Another common reason for this return code is if domain constraints are set, such as\n by using `isoutofdomain`, but the domain constraint is incorrect. For example, if\n one is solving the ODE `f(u,p,t) = -u - 1`, one may think \"but I want a solution with\n `u > 0` and thus I will set `isoutofdomain(u,p,t) = u < 0`. However, the true solution\n of this ODE is not positive, and thus what will occur is that the solver will try to\n decerase `dt` until it can give an accurate solution that is positive. As this is\n impossible, it will continue to shrink the `dt` until `dt < dtmin` and then exit with\n this return code.\n\n## Properties\n\n* successful_retcode = false\n" DtLessThanMin) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:183 =#) "`ReturnCode.Unstable`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the `unstable_check`\nfunction, as given by the `unstable_check` common keyword argument (or its default),\ngive a `true` at the current state.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because `u` contains a `NaN`\n or `Inf` value. The default `unstable_check` only checks for these values.\n\n## Properties\n\n* successful_retcode = false\n" Unstable) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:202 =#) "`ReturnCode.InitialFailure`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful because the initialization process failed.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the initialization\n process of a DAE solver failed to find consistent initial conditions, which can\n occur if the differentiation index of the DAE solver is too high. Most DAE solvers\n only allow for index-1 DAEs, and so an index-2 DAE will fail during this\n initialization. To solve this kind of problem, use `ModelingToolkit.jl` and its\n `structural_simplify` method to reduce the index of the DAE.\n* Another common reason for this return code is if the initial condition was not\n suitable for the numerical solve. For example, the initial point had a `NaN` or `Inf`.\n Or in optimization, this can occur if the initial point is outside of the bound\n constraints given by the user.\n\n## Properties\n\n* successful_retcode = false\n" InitialFailure) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:227 =#) "`ReturnCode.ConvergenceFailure`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful because internal nonlinear solver iterations\nfailed to converge.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because an inappropriate\n nonlinear solver was chosen. If fixed point iteration is used on a stiff problem,\n it will be faster by avoiding the Jacobian but it will make a stiff ODE solver not\n stable for stiff problems!\n\n## Properties\n\n* successful_retcode = false\n" ConvergenceFailure) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:247 =#) "`ReturnCode.Failure`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful but no extra information is given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for seeing this return code is because the solver is a wrapped\n solver (i.e. a Fortran code) which does not provide any extra information about its\n exit state. If this is from a Julia-based solver, please open an issue.\n\n## Properties\n\n* successful_retcode = false\n" Failure) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:265 =#) "`ReturnCode.ExactSolutionLeft`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, and the left solution was given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for this return code is via a bracketing nonlinear solver,\n such as bisection, iterating to convergence is unable to give the exact `f(x)=0`\n solution due to floating point precision issues, and thus it gives the first floating\n point value to the left for `x`.\n\n## Properties\n\n* successful_retcode = true\n" ExactSolutionLeft) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:284 =#) "`ReturnCode.ExactSolutionRight`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, and the right solution was given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for this return code is via a bracketing nonlinear solver,\n such as bisection, iterating to convergence is unable to give the exact `f(x)=0`\n solution due to floating point precision issues, and thus it gives the first floating\n point value to the right for `x`.\n\n## Properties\n\n* successful_retcode = true\n" ExactSolutionRight) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:303 =#) "`ReturnCode.FloatingPointLimit`\n\nThe success state of the solver. If this return code is given, then the solving\nprocess was successful, and the closest floating point value to the solution was given.\n\n## Common Reasons for Seeing this Return Code\n\n* The most common reason for this return code is via a nonlinear solver, such as Falsi,\niterating to convergence is unable to give the exact `f(x)=0` solution due to floating\npoint precision issues, and thus it gives the closest floating point value to the\ntrue solution for `x`.\n\n## Properties\n\n* successful_retcode = true\n" FloatingPointLimit) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:322 =#) "`ReturnCode.Infeasible`\n\nThe optimization problem was proven to be infeasible by the solver.\n\n## Properties\n\n* successful_retcode = false\n" Infeasible) (macrocall @doc :(#= /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:333 =#) "`ReturnCode.MaxTime`\n\nA failure exit state of the solver. If this return code is given, then the\nsolving process was unsuccessful and exited early because the solver's\ntimer hit `maxtime` either set by default or by the user in the\n`solve`/`init` command.\n\n## Properties\n\n* successful_retcode = false\n" MaxTime))))  └─ @ /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:1  Stacktrace:  [1] lower_step(iter::Base.JuliaLowering.LoweringIterator{Dict{Symbol, Dict{Int64, Any}}}, mod::Module, world::UInt64; soft_scope::Nothing)  @ Base.JuliaLowering /source/usr/share/julia/JuliaLowering/src/eval.jl:81  [2] lower_step(iter::Base.JuliaLowering.LoweringIterator{Dict{Symbol, Dict{Int64, Any}}}, mod::Module, world::UInt64; soft_scope::Nothing)  @ Base.JuliaLowering /source/usr/share/julia/JuliaLowering/src/eval.jl:72  [3] _eval(mod::Module, iter::Base.JuliaLowering.LoweringIterator{Dict{Symbol, Dict{Int64, Any}}}; soft_scope::Nothing)  @ Base.JuliaLowering /source/usr/share/julia/JuliaLowering/src/eval.jl:532  [4] eval(mod::Module, ex::Base.JuliaSyntax.SyntaxTree{Dict{Symbol, Dict{Int64, Any}}}; macro_world::UInt64, soft_scope::Nothing, opts::@Kwargs{expr_compat_mode::Bool})  @ Base.JuliaLowering /source/usr/share/julia/JuliaLowering/src/eval.jl:520 [inlined]  [5] top-level scope  @ ~/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:1  [6] macro expansion  @ ~/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:1 [inlined]  [7] include(mapexpr::Function, mod::Module, _path::String)  @ Base Base.jl:326  [8] top-level scope  @ ~/.julia/packages/SciMLBase/QqtZA/src/SciMLBase.jl:623  [9] include(mod::Module, _path::String)  @ Base Base.jl:325  [10] include_package_for_output(pkg::Base.PkgId, input::String, syntax_version::VersionNumber, depot_path::Vector{String}, dl_load_path::Vector{String}, load_path::Vector{String}, concrete_deps::Vector{Pair{Base.PkgId, UInt128}}, source::Nothing)  @ Base loading.jl:3296  [11] top-level scope  @ stdin:5  [12] eval(m::Module, e::Any)  @ Core boot.jl:522  [13] include_string(mapexpr::typeof(identity), mod::Module, code::String, filename::String)  @ Base loading.jl:3132  [14] include_string(m::Module, txt::String, fname::String)  @ Base loading.jl:3142 [inlined]  [15] exec_options(opts::Base.JLOptions)  @ Base client.jl:353  [16] _start()  @ Base client.jl:596 in expression starting at /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/retcodes.jl:1 in expression starting at /home/pkgeval/.julia/packages/SciMLBase/QqtZA/src/SciMLBase.jl:1 in expression starting at stdin:5 ✗ SciMLBase  ====================================================================================== Information request received. A stacktrace will print followed by a 1.0 second profile. --trace-compile is enabled during profile collection. ======================================================================================  cmd: /opt/julia/bin/julia 306 running 1 of 1  signal (10): User defined signal 1 _ZN12_GLOBAL__N_16Mapper11mapMetadataEPKN4llvm8MetadataE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN12_GLOBAL__N_16Mapper16remapInstructionEPN4llvm11InstructionE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm11ValueMapper16remapInstructionERNS_11InstructionE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm21CloneFunctionBodyIntoERNS_8FunctionERKS0_RNS_8ValueMapIPKNS_5ValueENS_14WeakTrackingVHENS_14ValueMapConfigIS7_NS_3sys10SmartMutexILb0EEEEEEENS_10RemapFlagsERNS_15SmallVectorImplIPNS_10ReturnInstEEEPKcPNS_14ClonedCodeInfoEPNS_20ValueMapTypeRemapperEPNS_17ValueMaterializerEPKSt8functionIFbPKNS_8MetadataEEE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm17CloneFunctionIntoEPNS_8FunctionEPKS0_RNS_8ValueMapIPKNS_5ValueENS_14WeakTrackingVHENS_14ValueMapConfigIS7_NS_3sys10SmartMutexILb0EEEEEEENS_23CloneFunctionChangeTypeERNS_15SmallVectorImplIPNS_10ReturnInstEEEPKcPNS_14ClonedCodeInfoEPNS_20ValueMapTypeRemapperEPNS_17ValueMaterializerE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) removeAddrspaces at /source/src/llvm-remove-addrspaces.cpp:357:26 run at /source/src/llvm-remove-addrspaces.cpp:430:37 run at /source/src/llvm-remove-addrspaces.cpp:456:65 run at /source/usr/include/llvm/IR/PassManagerInternal.h:91:41 _ZN4llvm11PassManagerINS_6ModuleENS_15AnalysisManagerIS1_JEEEJEE3runERS1_RS3_ at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) run at /source/src/pipeline.cpp:989:12 operator() at /source/src/jitlayers.cpp:1298:17 operator() at /source/src/jitlayers.cpp:1435:12 [inlined] optimizeModule at /source/src/jitlayers.cpp:2382:18 materialize at /source/src/jitlayers.cpp:905:31 _ZN4llvm3orc19MaterializationTask3runEv at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) dispatch at /source/src/julia-task-dispatcher.h:353:11 _ZN4llvm3orc16ExecutionSession22dispatchOutstandingMUsEv at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm3orc16ExecutionSession17OL_completeLookupESt10unique_ptrINS0_21InProgressLookupStateESt14default_deleteIS3_EESt10shared_ptrINS0_23AsynchronousSymbolQueryEESt8functionIFvRKNS_8DenseMapIPNS0_8JITDylibENS_8DenseSetINS0_15SymbolStringPtrENS_12DenseMapInfoISF_vEEEENSG_ISD_vEENS_6detail12DenseMapPairISD_SI_EEEEEE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm3orc25InProgressFullLookupState8completeESt10unique_ptrINS0_21InProgressLookupStateESt14default_deleteIS3_EE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm3orc16ExecutionSession19OL_applyQueryPhase1ESt10unique_ptrINS0_21InProgressLookupStateESt14default_deleteIS3_EENS_5ErrorE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) _ZN4llvm3orc16ExecutionSession6lookupENS0_10LookupKindERKSt6vectorISt4pairIPNS0_8JITDylibENS0_19JITDylibLookupFlagsEESaIS8_EENS0_15SymbolLookupSetENS0_11SymbolStateENS_15unique_functionIFvNS_8ExpectedINS_8DenseMapINS0_15SymbolStringPtrENS0_17ExecutorSymbolDefENS_12DenseMapInfoISI_vEENS_6detail12DenseMapPairISI_SJ_EEEEEEEEESt8functionIFvRKNSH_IS6_NS_8DenseSetISI_SL_EENSK_IS6_vEENSN_IS6_SV_EEEEEE at /opt/julia/bin/../lib/julia/libLLVM.so.21.1jl (unknown line) publishCIs at /source/src/jitlayers.cpp:2085:14 jl_compile_codeinst_impl at /source/src/jitlayers.cpp:510:39 jl_compile_method_very_internal at /source/src/gf.c:3946:27 _jl_invoke at /source/src/gf.c:4352:16 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] ijl_lower at /source/src/ast.c:1274:26 jl_eval_toplevel_stmts at /source/src/toplevel.c:598:31 jl_eval_module_expr at /source/src/toplevel.c:263:5 [inlined] jl_toplevel_eval_flex at /source/src/toplevel.c:665:27 jl_eval_toplevel_stmts at /source/src/toplevel.c:602:15 jl_toplevel_eval_flex at /source/src/toplevel.c:684:27 ijl_toplevel_eval at /source/src/toplevel.c:782:12 ijl_toplevel_eval_in at /source/src/toplevel.c:827:13 eval at ./boot.jl:522:0 (pc: 1) include_string at ./loading.jl:3132:0 (pc: 207) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 _include at ./loading.jl:3192:0 (pc: 122) include at ./Base.jl:325:0 (pc: 1) include_package_for_output at ./loading.jl:3296:0 (pc: 837) jfptr_include_package_for_output_1.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] do_call at /source/src/interpreter.c:123:26 eval_value at /source/src/interpreter.c:243:16 eval_stmt_value at /source/src/interpreter.c:194:23 [inlined] eval_body at /source/src/interpreter.c:706:13 jl_interpret_toplevel_thunk at /source/src/interpreter.c:897:21 ijl_eval_thunk at /source/src/toplevel.c:768:18 jl_toplevel_eval_flex at /source/src/toplevel.c:712:26 jl_eval_toplevel_stmts at /source/src/toplevel.c:602:15 jl_toplevel_eval_flex at /source/src/toplevel.c:684:27 ijl_toplevel_eval at /source/src/toplevel.c:782:12 ijl_toplevel_eval_in at /source/src/toplevel.c:827:13 eval at ./boot.jl:522:0 (pc: 1) include_string at ./loading.jl:3132:0 (pc: 207) include_string at ./loading.jl:3142:0 [inlined] exec_options at ./client.jl:353:0 (pc: 841) _start at ./client.jl:596:0 (pc: 294) jfptr__start_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] true_main at /source/src/jlapi.c:971:29 jl_repl_entrypoint at /source/src/jlapi.c:1138:15 main at /source/cli/loader_exe.c:58:15 unknown function (ip: 0x7a2209c6f249) at /lib/x86_64-linux-gnu/libc.so.6 __libc_start_main at /lib/x86_64-linux-gnu/libc.so.6 (unknown line) unknown function (ip: 0x4010b8) at /workspace/srcdir/glibc-2.17/csu/../sysdeps/x86_64/start.S unknown function (ip: (nil)) at (unknown file)   ============================================================== Profile collected. A report will print at the next yield point. Disabling --trace-compile ==============================================================  ====================================================================================== Information request received. A stacktrace will print followed by a 1.0 second profile. --trace-compile is enabled during profile collection. ====================================================================================== cmd: /opt/julia/bin/julia 85 running 0 of 1 signal (10): User defined signal 1 epoll_pwait at /lib/x86_64-linux-gnu/libc.so.6 (unknown line) uv__io_poll at /workspace/srcdir/libuv/src/unix/linux.c:1404:0 uv_run at /workspace/srcdir/libuv/src/unix/core.c:430:0 ijl_task_get_next at /source/src/scheduler.c:524:34 wait at ./task.jl:1248:0 (pc: 107) wait_forever at ./task.jl:1170:0 (pc: 4) jfptr_wait_forever_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] start_task at /source/src/task.c:1276:19 unknown function (ip: (nil)) at (unknown file) ============================================================== Profile collected. A report will print at the next yield point. Disabling --trace-compile ============================================================== ┌ Warning: There were no samples collected in one or more groups. │ This may be due to idle threads, or you may need to run your │ program longer (perhaps by running it multiple times), │ or adjust the delay between samples with `Profile.init()`. └ @ Profile /opt/julia/share/julia/stdlib/v1.14/Profile/src/Profile.jl:1361 Overhead ╎ [+additional indent] Count File:Line Function ========================================================= Thread 1 (default) Task 0x00007b2f412a1690 Total snapshots: 369. Utilization: 0% ╎369 @Base/task.jl:1170 wait_forever() 368╎ 369 @Base/task.jl:1248 wait() ====================================================================================== Information request received. A stacktrace will print followed by a 1.0 second profile. --trace-compile is enabled during profile collection. ====================================================================================== cmd: /opt/julia/bin/julia 1 running 0 of 1 signal (10): User defined signal 1 epoll_pwait at /lib/x86_64-linux-gnu/libc.so.6 (unknown line) uv__io_poll at /workspace/srcdir/libuv/src/unix/linux.c:1404:0 uv_run at /workspace/srcdir/libuv/src/unix/core.c:430:0 ijl_task_get_next at /source/src/scheduler.c:524:34 wait at ./task.jl:1248:0 (pc: 107) wait_forever at ./task.jl:1170:0 (pc: 4) jfptr_wait_forever_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] start_task at /source/src/task.c:1276:19 unknown function (ip: (nil)) at (unknown file) ============================================================== Profile collected. A report will print at the next yield point. Disabling --trace-compile ============================================================== ┌ Warning: There were no samples collected in one or more groups. │ This may be due to idle threads, or you may need to run your │ program longer (perhaps by running it multiple times), │ or adjust the delay between samples with `Profile.init()`. └ @ Profile /opt/julia/share/julia/stdlib/v1.14/Profile/src/Profile.jl:1361 Overhead ╎ [+additional indent] Count File:Line Function ========================================================= Thread 1 (default) Task 0x0000782fa79e8880 Total snapshots: 345. Utilization: 0% ╎345 @Base/task.jl:1170 wait_forever() 344╎ 345 @Base/task.jl:1248 wait() [1] signal 15: Terminated in expression starting at /PkgEval.jl/scripts/evaluate.jl:156 epoll_pwait at /lib/x86_64-linux-gnu/libc.so.6 (unknown line) uv__io_poll at /workspace/srcdir/libuv/src/unix/linux.c:1404:0 uv_run at /workspace/srcdir/libuv/src/unix/core.c:430:0 ijl_task_get_next at /source/src/scheduler.c:524:34 wait at ./task.jl:1248:0 (pc: 107) wait_forever at ./task.jl:1170:0 (pc: 4) jfptr_wait_forever_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] start_task at /source/src/task.c:1276:19 unknown function (ip: (nil)) at (unknown file) Allocations: 14307635 (Pool: 14306880; Big: 755); GC: 15 [85] signal 15: Terminated in expression starting at /PkgEval.jl/scripts/precompile.jl:34 epoll_pwait at /lib/x86_64-linux-gnu/libc.so.6 (unknown line) uv__io_poll at /workspace/srcdir/libuv/src/unix/linux.c:1404:0 uv_run at /workspace/srcdir/libuv/src/unix/core.c:430:0 ijl_task_get_next at /source/src/scheduler.c:524:34 wait at ./task.jl:1248:0 (pc: 107) wait_forever at ./task.jl:1170:0 (pc: 4) jfptr_wait_forever_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] start_task at /source/src/task.c:1276:19 unknown function (ip: (nil)) at (unknown file) Allocations: 4492517 (Pool: 4492322; Big: 195); GC: 7 val already in a list atexit hook threw an error: ErrorException("schedule: Task not runnable") error at ./error.jl:56:0 (pc: 6) #schedule#625 at ./task.jl:1053:0 (pc: 71) schedule at ./task.jl:1045:0 [inlined] uv_writecb_task at ./stream.jl:1198:0 (pc: 11) jlcapi_uv_writecb_task_756.1 at /opt/julia/lib/julia/sys.so (unknown line) uv__write_callbacks at /workspace/srcdir/libuv/src/unix/stream.c:926:0 uv__stream_io at /workspace/srcdir/libuv/src/unix/stream.c:1227:0 uv__run_pending at /workspace/srcdir/libuv/src/unix/core.c:824:0 uv_run at /workspace/srcdir/libuv/src/unix/core.c:420:0 ijl_process_events at /source/src/jl_uv.c:397:21 process_events at ./libuv.jl:133:0 [inlined] wait at ./task.jl:1235:0 (pc: 15) uv_write at ./stream.jl:1079:0 (pc: 11) unsafe_write at ./stream.jl:1152:0 (pc: 55) write at ./strings/io.jl:237:0 [inlined] print at ./strings/io.jl:239:0 (pc: 5) jfptr_print_118.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 showerror at ./errorshow.jl:164:0 (pc: 2) unknown function (ip: 0x7b2f3df59e36) at (unknown file) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 _atexit at ./initdefs.jl:545:0 (pc: 210) jfptr__atexit_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] ijl_atexit_hook at /source/src/init.c:264:17 jl_exit_thread0_cb at /source/src/signals-unix.c:678:5 jl_fake_signal_return at /opt/julia/bin/../lib/julia/libjulia-internal.so.1.14 (unknown line) epoll_pwait at /lib/x86_64-linux-gnu/libc.so.6 (unknown line) uv__io_poll at /workspace/srcdir/libuv/src/unix/linux.c:1404:0 uv_run at /workspace/srcdir/libuv/src/unix/core.c:430:0 ijl_task_get_next at /source/src/scheduler.c:524:34 wait at ./task.jl:1248:0 (pc: 107) wait_forever at ./task.jl:1170:0 (pc: 4) jfptr_wait_forever_0.1 at /opt/julia/lib/julia/sys.so (unknown line) _jl_invoke at /source/src/gf.c:4360:23 [inlined] ijl_apply_generic at /source/src/gf.c:4598:12 jl_apply at /source/src/julia.h:2388:12 [inlined] start_task at /source/src/task.c:1276:19 PkgEval terminated after 2731.51s: test duration exceeded the time limit