SECOND ROW - CENTER AND LEFT - FOUR DOOR

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler Mopar Parts Catalog.




1. With both second row seat backs in the uptight position, engage the anchor plate and webbing for the center or left second row seat belt buckle unit through the elastic loop integral to the seat cushion trim cover and between the seat back and cushion.
2. Fold the 60 percent second row seat back flat for easiest access to the center seat belt buckle (1) anchor, or the 40 percent seat back flat for easiest access to the left seat belt buckle (3) anchor.
3. Position the center or left seat belt buckle unit anchor plate onto the stud on the center seat bracket, hinge and latch unit (2).
4. Install and tighten the nut (4) that secures the buckle unit to the stud. Tighten the nut to 45 Nm (33 ft. lbs.).
5. Restore the second row seat back to the uptight position.