INSTALLATION
GAS POWERED
The fuel tank skid plate and the fuel tank assembly are installed at the same. They share common fasteners.
1.
If fuel pump module had been removed, install module to tank.
2.
Position fuel tank into skid plate.
3.
Support tank with a hydraulic jack.
4.
Partially raise tank to allow connections at top of tank.
5.
Connect electrical connector to fuel pump module.
6.
Continue raising tank snugly to body.
7.
Connect quick-connect fitting (2).
8.
Connect quick-connect fitting (9).
9.
Connect quick-connect fitting (10).
10.
Install hose (4) to tank and install clamp (3).
11.
Connect quick-connect fittings at front of tank.
12.
Install two tank mounting bolts at rear of fuel tank.
13.
Install three tank mounting bolts at right side of fuel tank.
14.
Install three tank mounting bolts at left side of fuel tank.
DIESEL POWERED
1.
If fuel pump module had been removed, install module to tank.
2.
Position fuel tank into skid plate.
3.
Support tank with a hydraulic jack.
4.
Partially raise tank to gain access to pump module electrical connector (4).
5.
Connect electrical connector (4) to fuel pump module.
6.
Continue raising tank snugly to body.
7.
Connect quick-connect fittings (1) and (4) for fuel supply and return lines at front of tank.
8.
Install two tank mounting bolts at rear of fuel tank.
9.
Install three tank mounting bolts at right side of fuel tank.
10.
Install three tank mounting bolts at left side of fuel tank.
11.
Connect quick-connect fitting (2).
12.
Connect hose (1) and fuel fill hose clamp (2) at rear of tank (3).