TRANSMISSION

Component	Metric	Inch
Output Shaft End Play	0.22-0.55 mm	0.009-0.021 in.
Input Shaft End Play	0.46-0.89 mm	0.018-0.035 in.
2C Clutch Pack Clearance	0.455-1.335 mm	0.018-0.053 in.
4C Clutch Pack Clearance	0.770-1.390 mm	0.030-0.055 in.
L/R Clutch Pack Clearance	1.00-1.74 mm	0.039-0.069 in.
OD Clutch Pack Clearance	1.103-1.856 mm	0.043-0.073 in.
UD Clutch Pack Clearance	0.84-1.54 mm	0.033-0.061 in.
Reverse Clutch Pack Clearance	0.81-1.24 mm	0.032-0.049 in.
Recommended fluid	Mopar ATF +4

DESCRIPTION	Nm	Ft. Lbs.	In. Lbs.
Fitting, cooler line at trans	17.5	-	155
Bolt, torque converter housing to engine upper four	41	30
Bolt, torque converter housing to engine lower four	54	40
Bolts, transmission collar	68	50
Bolt, torque converter to driveplate	31	23	270
Bolt/nut, crossmember	68	50	-
Bolt, driveplate to crankshaft	75	55	-
Bolts, clevis bracket / rear support	47	35
Bolt , converter housing	68	50
Bolt, oil pan	12	-	105
Screw, primary fluid filter	4.5	-	40
Nuts, transfer case	35	26
Oil Filter, Cooler Return	9.5		84
Bolt, oil pump	28	-	250
Bolt, oil pump body to cover	4.5	-	40
Screw, plate to oil pump body	4.5	-	40
Bolt, valve body to case	12	-	105
Plug, pressure test port	5	-	45
Bolt, reaction shaft support	12	-	105
Screw, valve body to transfer plate	5.5	-	50
Screw, solenoid module to transfer plate	6	-	50
Screw, accumulator cover	7	-	60
Screw, detent spring	4.5	-	40
Bolt, input speed sensor	12	-	105
Bolt, output speed sensor	12	-	105
Bolt, line pressure sensor	12	-	105
Bolt, extension housing	54	40	-
Screw, manual valve cam retaining	4.5	-	40
Screw, manual selector shaft retaining	28	-	250
Cross-bolt, manual selector shaft	16	-	140