REMOVAL
1.
Remove the hard tops, if equipped,
(Refer to 23 - BODY/REMOVABLE TOP/TOP - REMOVAL).
2.
Remove the sport bar speaker pod,
(Refer to 23 - BODY/INTERIOR/SPORT BAR - SPEAKER POD - REMOVAL).
On four door vehicles;
3.
Remove the seat belt retractor (4) and turning loop (2) as necessary,
(Refer to 8 - ELECTRICAL/RESTRAINTS/SEAT BELT & RETRACTOR
- REMOVAL).
On four door vehicles;
4.
If equipped, separate the rear dome light (6) from the sport bar cross bar and disconnect the electrical connector (4).
On four door vehicles;
5.
Unzip the cover (2) and remove.
On four door vehicles;
6.
Using a trim stick C-4829 or equivalent, separate the push pin fasteners and remove the interior lamp bezel (5).
7.
Remove the cross bar trim (6) and (4).
8.
Remove the side trim (2) and (8).
On two door vehicles;
9.
Unzip the cover (1) and separate the trim (2).
On two door vehicles;
10.
Unzip the cover (1) and separate the trim (2).
On two door vehicles;
11.
Separate the trim (1) and (3).
12.
Unzip the side bar covers.
13.
Using a trim stick C-4829 or equivalent, separate the push pin fasteners (2) and (4) and remove the trim (1) and (3).