INSTALLATION

1. Position the hinge (1) onto the hood (3).
2. Install bolts (2) finger-tight.
3. Align hinges with installation reference marks made previously and tighten bolts to 26 Nm (19 ft. lbs.).

4. Install the hinge to body bolts (2).
5. Align hinges with installation reference marks made previously and tighten bolts to 24 Nm (17.5 ft. lbs.).
6. If required, adjust the hood to the correct position (Refer to 23 - BODY/BODY STRUCTURE/GAP AND FLUSH - SPECIFICATIONS).

7. Install the cowl top panel (3), (Refer to 23 - BODY/EXTERIOR/PANEL - COWL TOP - INSTALLATION).