REMOVAL
NOTE:
Four door model shown in the illustration. Body isolators for two door models are similar.
1.
If removing the front isolators (2) remove the grille,
(Refer to 23 - BODY/EXTERIOR/GRILLE - REMOVAL).
2.
Loosen all body to frame mounting bolts (4) and nuts (3), (two door has 8 bolts and two nuts, four door has 10 bolts and two nuts).
3.
Remove the mounting bolts (4) and isolator nuts (1) as necessary.
4.
Using a floor jack and wooden block under the body sill, lift the body to gain access to the isolators and remove the isolators as necessary.