REMOVAL
1.
Apply a length of masking tape on the body (2) and hood (1), parallel to the top edge of the nameplate to use as a guide, if necessary.
2.
Apply a length of masking tape on the body (1), parallel to the top edge of the nameplate to use as a guide, if necessary.
NOTE:
Exterior nameplates are attached to body panels with adhesive tape.
3.
If temperature is below 21 degrees C (70 degrees F) warm emblem with a heat lamp or gun. Do not exceed 52 degrees C (120 degrees F) when heating emblem.
CAUTION:
Use care when separating the emblem from the body surface to avoid scratching the paint.
4.
Using a trim stick C-4755 or equivalent, behind the emblem to separate the adhesive backing from the body.
5.
Clean adhesive residue from body with MOPAR Super Clean solvent or equivalent.