INSTALLATION

NOTE: Full front door shown, all others similar.

1. Align pins on door hinge to holes in hinge on body and position door into place.
2. Install the nuts (1) and tighten to 8.5 Nm (75 in. lbs.).
3. Install the wire harness onto the footman loop and connect the electrical connector.
4. If necessary, adjust the door (Refer to 23 - BODY/DOOR-FRONT - ADJUSTMENTS).

5. Install the lower B-pillar trim (2), (Refer to 23 - BODY/INTERIOR/B-PILLAR TRIM - INSTALLATION).