B2206-CURRENT VIN MISSING / MISMATCH

For a complete wiring diagram Refer to Section 8W.

When Monitored:
With the ignition on.
Set Condition:
A PCM from another vehicle has been installed in the vehicle.

Possible Causes

PCM FROM ANOTHER VEHICLE INSTALLED

Diagnostic Test

1. PCM FROM ANOTHER VEHICLE INSTALLED

NOTE: This DTC is set when a PCM from another vehicle is installed into the current vehicle.

Has another PCM been installed?

Yes

Replace the PCM in accordance with the service information.

Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)

No

Go To 2

2. OTHER CAN-C MODULES SET VIN MISMATCH

Is VIN Mismatch DTC set in other CAN-C modules?

Yes

Replace the PCM in accordance with the service information.

Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)

No

Replace the TIPM in accordance with the service information.
Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)