BULB

NOTE: The following procedure applies only to vehicles manufactured for export markets. Rear fog lamps are not available in vehicles manufactured for domestic markets.

1. Disconnect and isolate the battery negative cable.
2. Reach under and behind the outboard end of the rear bumper cover (1) to access the take out and connector (4) of the rear bumper wire harness on the back of the rear fog lamp housing.
3. Firmly grasp the connector and socket on the back of the housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the socket and bulb straight out from the keyed opening in the lamp housing.
5. Pull the base of the bulb straight out of the socket.