REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Disconnect the engine compartment wire harness connector from the headlamp leveling motor (1) connector receptacle.
3. Rotate the headlamp leveling motor on the back of the front end module carrier (2) counterclockwise about 30 degrees.
4. Grasp the motor firmly with one hand and pull sharply and quickly straight rearward to unsnap the ball on the end of the motor pushrod from the socket on the spacer (3).
5. Remove the headlamp leveling motor from the engine compartment.

NOTE: The spacer and the headlamp mounting collar (4) cannot be repaired. If the spacer or collar break or if the spacer becomes disengaged from the collar before the leveling motor pushrod disengages the spacer, both the spacer and the mounting collar will also require replacement.