INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.




1. Position the positive temperature coefficient (PTC) relays number 1 and 2 (1) as necessary into the proper receptacle of the diesel accessory fuse/relay block (2) located on the inner right front fender (3).
2. Align the PTC relay terminals with the terminal cavities in the fuse/relay block and push down firmly on each relay until the terminals are fully seated.



3. Position the PTC relay number 3 (1) as necessary into the proper receptacle of the diesel accessory fuse/relay block (2) located on the inner left front fender (3).
4. Align the PTC relay terminals with the terminal cavities in the fuse/relay block and push down firmly on the relay until the terminals are fully seated.
5. Reconnect the negative battery cable.