PRESSURE HOSE
1.
Install the pressure hose to the vehicle.
2.
Install and secure the pressure hose at the routing clips (1).
3.
Install the Pressure hose (2) at the gear. Tighten the tube nut to 36 Nm (27 ft. lbs.).
4.
Install the pressure hose (2) at the pump pressure port. Tighten the tube nut to 31 Nm (23 ft. lbs.).
5.
Reinstall the coolant bottle back into position.
6.
Fill and bleed the power steering system
(Refer to 19 - STEERING - STANDARD PROCEDURE).
7.
Check for leaks.
8.
Install the air box assembly
(Refer to 9 - ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION).