REAR BRAKE HOSE

1. Using a brake pedal holding tool, depress brake pedal past its first inch of travel and hold it in this position. Holding pedal in this position will isolate master cylinder from hydraulic brake system and will not allow brake fluid to drain out of brake fluid reservoir while brake lines are open.
2. Raise and support vehicle.
3. Remove the banjo bolt (2) from the rear caliper for the brake hose (1).

4. Remove the rear brake line (1) from the brake hose (3) at the frame.
5. Remove the mounting bolt (2) for the brake hose (3) at the frame.
6. Remove the brake hose (3).