Relay Documentation

操作項目とメーター機能

概要

Relayのメイン・インターフェースには、Peak+RMSレベルメーター（最大7.1.2 Dolby Atmosサラウンド構成をサポート）、出力ゲイン操作、ステレオパン、そしてステレオ幅操作が搭載されています。更に、Relayの拡張コントロールパネルには、チャンネル操作処理オプション（位相、入れ替え、モノ）、チャンネルディレイ操作、そして可変ハイパスフィルターが含まれます。

ヘッダー操作項目

Relayプラグインのヘッダー部分には以下の操作項目があります。

プラグイン名表示

使用中のRelayの名称が表示されます。使用するDAWやNLEによっては、この名称は自動的にRelayのインサートされたトラックになる場合があります。この名称は、互換性のあるiZotopeプラグインのソース選択リストに表示されます。ペンシル印のアイコンをクリックするか、直接テキスト入力することで、名称を変更することができます。

Bypass（バイパス）

Relay処理の有効化と無効化を切り替えます。

Options（オプション）

オプションメニューのパネルを開きます。

更なる情報

Relayのオプションメニューに関する詳細は、オプションの項をご参照ください。

Help（ヘルプ）

Relayに関するヘルプドキュメントを開きます。

主要操作項目

Relayプラグインの主要パネルには以下の操作項目があります。

Output Gain（出力ゲイン）

Relayの出力ゲインを調整します。出力ゲインの調整は全チャンネル均等に適用されます。

Width（幅）

出力ゲインに適用されるステレオ幅の分量を調整します。マイナス値はより狭い幅を意味し（-100%はモノと同等）、プラス値にするとステレオ幅が広がります。これはRelayをステレオで使用する際のみ作動します。

Pan（パン）

出力信号の左右のパンを調整します。これはRelayをステレオで使用する際のみ作動します。

メーター

Relayはモノ、ステレオ、そしてサラウンドトラックにインサート可能です。メーターには各チャンネルのPeak+RMSレベル情報が表示されます。クリップ上部のテキスト数値はその時のピーク値（トップ）とRMS値（底）を示します。クリップインジケーターをクリックすると、これをクリアすることができます。

拡張操作項目

“Advanced”ボタンをクリックすると、拡張パネルを表示することができます。

以下のセクションでは、チャンネル操作処理の試聴、左右のチャンネルのディレイ量、そして可変ハイパスフィルターの有効化に関する拡張操作項目について説明します。

Mono（モノ）

左右のチャンネルを合算し、モノ信号を出力します。これはモノ互換のテスト時に便利です。

これはRelayをステレオで使用する際のみ作動します。

Invert（反転）

入力信号の極性を反転させます。

これはRelayをステレオで使用する際のみ作動します。

Swap（入れ替え）

左右のチャンネルを入れ替えます。

これはRelayをステレオで使用する際のみ作動します。

Time Delay（ディレイ時間）

左右のチャンネルのディレイ時間を調整します。リンクが有効になっている場合、相関性のある値に調整されます。手動で数値を入力する場合は、テキスト数値をダブルクリックします。

これはRelayをステレオで使用する際のみ作動します。

ハイパスフィルター

ここでは、拡張パネルにあるハイパスフィルターの操作項目について説明します。

有効化

ハイパスフィルターは小型フィルター表示上部にある電源ボタンをクリックすることで有効化できます。

傾斜度

フィルターの電源ボタン下にあるドロップダウンメニューより数値を選択すると、ハイパスフィルターの傾斜度を変更することができます。

ハイパスフィルターには以下の選択肢があります:

12 dB
24 dB
48 dB

カットオフ周波数

操作点をクリックしてドラッグするか、フィルター表示の右下角にあるテキスト数値をダブルクリックすると、カットオフ周波数を変更することができます。

プラグイン間コミュニケーション

概要

Relayは次のプラグイン間コミュニケーション（Inter Plug-in Communication＝IPC）互換のあるiZotopeプラグインにメーター情報を送信したり、それらから情報を受信したりすることができます: Insight 2、トーナルバランスコントロール、Neutron 2、Neutron 2 EQプラグイン、Neutron 2 ビジュアルミキサー。

RelayとInsight 2

RelayはInsight 2のスペクトログラムメーターと明瞭度メーターにメーター情報を送信することができます。

スペクトログラムにおけるRelay

Insight 2のスペクトログラムメーターパネルは、同時に8基のRelayを表示することができます。

明瞭度メーターにおけるRelay

Insight 2の明瞭度メーターでは、Relayをソースとして選択することができます。

Relayとトーナルバランスコントロール

トーナルバランスコントロール・プラグインでは、Relayをソースとして選択することができます。

RelayとNeutron 2のマスキングメーター

Neutron 2（EQモジュール）及び Neutron 2 EQコンポーネントプラグインに搭載されたマスキングメーターでは、Relayをソースとして選択することができます。

RelayとNeutron 2ビジュアルミキサー

Neutron 2ビジュアルミキサーでRelayの遠隔操作を行うことができます。ビジュアルミキサー内でRelayの操作点を上下に動かすと、リモート側のゲインスライダーが調整されます。ビジュアルミキサー内でRelayの操作点を左右に動かすと、リモート側のパン操作が調整されます（Relayステレオ使用時のみ）。ビジュアルミキサー内でRelayの操作点ハンドルをドラッグすると、リモート側の幅のパラメーターが調整されます。（Relayステレオ使用時のみ）。

Relay and Nectar 3

Relay can be used as an Unmask source in Nectar 3 Vocal Assistant. When masking is detected between the Nectar 3 instance and the Relay instance, an EQ curve will be applied to the Relay instance in order to reduce masking of the vocal track. When the EQ curve is active, Relay will display the track name it is unmasking. The EQ curve can be disabled by clicking on the “Unmasking” status button in the Relay interface.

オプション

General（全般）

Show Tooltips（機能のヒントを表示）: 機能のヒントの表示と非表示を切り替えます。
Send anonymous usage data（匿名使用データの送信）: iZotopeによるRelay機能向上のため、匿名の使用データの送信を有効にします。

Updates（アップデート）

Download Product（製品をダウンロード）: iZotope製品ポータルアプリケーションから最新版Relayを常にダウンロードするようにします。
Check for Updates（アップデートをチェック）: 手動でアップデートの有無を確認します。このボタンをクリックすると、製品ポータルアプリケーションを開き、アップデートの確認を行います。
Download Update（アップデートをダウンロード）: アップデートがある場合、小さな青いドットが表示されます。オプション画面内にあるDownload Updateボタンをクリックすると、ポータルアプリケーションが起動し、アップデートページが表示されます。

Authorization（オーソリゼーション）

ここにはその時のオーソリゼーションに関する情報が表示されます。

Current Authorization Status Text（現在のオーソリゼーション状況）: 現在のRelayのオーソリゼーションに関するステータスが表示されます。
Authorize（オーソライズ）: iZotopeオーソリゼーション画面を起動します。
Remove Authorization（オーソリゼーションを解除）: 現在のオーソリゼーションを解除します。注: Relayのシリアル番号情報を含むiLokキーがコンピュータに接続されている場合、このボタンを押してもオーソリゼーションは解除されません。その場合は、iLokの接続を外すことでRelayのオーソリゼーションを解除することができます。

オーソリゼーション

概要

お使いのDAWまたはNLEで最初にRelayを開いた際にiZotopeオーソリゼーション画面が表示されます。

オーソリゼーション画面では以下の作業が行えます:

DEMO（デモ）: 機能限定のデモ版として試験的に使用します。
AUTHORIZE（オーソライズ）: シリアル番号で製品をオーソライズします。

デモモード

オーソリゼーション画面で’Demo’を選択するとRelayはデモ版として動作しますので、定期的に無音を出力します。

Relayのオーソライズ

Relayには3通りのオーソライズ方法があります:

Online Authorization（オンライン・オーソリゼーション）: インターネット接続のあるコンピューターでRelayを使用する場合は、この方法を選択してください。
Offline Authorization（オフライン・オーソリゼーション）: Relayを使用するコンピューターがインターネットに接続されていない場合は、この方法を選択してください。
iLok Authorization（iLokオーソリゼーション）: iLokでRelayをオーソライズする場合は、この方法を選択してください。

更なる情報

オーソリゼーションに関する詳細はiZotopeウェブサイトにてご覧頂けます: https://www.izotope.com/authorization

Relayのオーソライズに関する追加情報:

iZotopeウェブサイトのカスタマーケアーに関するページをご覧ください: http://www.izotope.com/support
カスタマーケアーsupport@izotope.comまでお問い合わせください。

iZotopeのカスタマーケアーに関する詳細はiZotopeカスタマーケアーの章に記述があります。

カスタマーケアー

iZotopeカスタマーケアーの方針

iZotopeは全ての登録ユーザー様に、完全に無償でプロフェッショナルなテクニカル/カスタマーケアーを提供しております。
Contact iZotope Customer Care

また、弊社ではiZotope製品の購入に興味がおありのお客様にも、価値あるプリセールスのテクニカル/カスタマーケアーを提供しております。iZotopeカスタマーケアーへご連絡頂きます際は、事前に製品ナレッジベースをご確認の上、ご質問や問題に対する解答がないかどうかお調べください。

iZotopeは購入した製品に対し、どれくらいの期間、カスタマーケアーを提供するのですか?

iZotope製品の購入から12ヶ月間は質問内容に関わらず、弊社カスタマーケアーまでメールでお問い合わせ頂くことができます。それ以降は、アカウントやオーソライズに関するご質問はお受け致しますが、技術的なご質問や製品に対する詳細なご質問はお受け致しかねます。製品の詳細な使い方に関するご質問に関しては、弊社サイトのFAQやチュートリアルを活用してください。

iZotopeはいつまで製品をサポートするのですか?

お約束はできませんが、弊社は我々の製品を最新のオペレーティングシステムやプラグインホストに対応できるよう、最善の努力を尽くします。時として、他社により我々がサポートできない変更が加えられることはありますが、我々はそうした互換性の問題を回避すべく、他社とアクティブに作業を行っております。また、我々は規定した仕様に沿って製品をお使い頂けるよう、製品内のバグフィックスにも最善を尽くしております。

製品のリリースから12ヶ月間にわたり、アップデートを提供致します。リリースから12ヶ月を過ぎると、アップデートの提供はありません。

それぞれの製品に対応したオペレーティングシステムやプラグインホストソフトウェアに関する公式な互換性情報につきましては、製品の仕様ページをご覧ください。

iZotopeカスタマーケアーへの連絡方法

Relayに関するご質問は下記にて承っております:

*弊社ウェブサイトのカスタマーケアーページwww.izotope.com/supportをご覧ください。
* カスタマーケアーsupport@izotope.comまでお問い合わせください。

頂きましたご質問には、熟練のiZotopeカスタマーケアーチームが、1営業日、あるいはそれ以内に返答をお送りします。問題やご質問の内容は、できる限り詳細かつ明確に記述してください。これは、初回返信時での正確な返答や問題解決にとって欠かせません。ご使用のRelayのビルト/バージョンや、全システムの仕様を必ずご記入ください。

カスタマーケアーへのリクエストが送信されると、iZotopeカスタマーケアーより自動返信の確認メールが送信されます。数分以内にこのメールが届かない場合は、スパムフォルダを確認し、我々からのメールがブロックされていないことをお確かめください。こうした問題は、support@izotope.comを認証メールアドレスに追加して頂くことにより防止できます。

国際的な販売網

世界各地のiZotope認定代理店にてiZotope製品をご購入頂いたお客様には、それら代理店よりカスタマーケアーが提供されます。

カスタマーケアーの有無につきましては、該当する代理店までお問い合わせください。各地域の販売代理店に関するご質問につきましては、iZotopeカスタマーケアーまでお問い合わせください。

Relayをご利用頂きまして誠に有り難うございます。

iZotopeチーム

エンドユーザー向け使用許諾契約 (EULA)

END USER LICENSE AGREEMENT

READ CAREFULLY THE TERMS AND CONDITIONS OF THIS AGREEMENT (“AGREEMENT”) BEFORE YOU CLICK ON THE “ACCEPT” BUTTON OR OTHERWISE USE THE PRODUCT. CLICKING ON THE “ACCEPT” BUTTON OR OTHERWISE DOWNLOADING, INSTALLING AND/OR USING THE LICENSED SOFTWARE OR ANY TECHNOLOGY, IDEA, DATA AND DATABASES, ALGORITHM OR INFORMATION CONTAINED THEREIN OR PROVIDED THEREWITH (COLLECTIVELY, THE “SOFTWARE”), ESTABLISHES A BINDING AGREEMENT BETWEEN YOU AS THE PERSON LICENSING THE SOFTWARE, EITHER ON BEHALF OF YOURSELF OR ANY THIRD PARTY ENTITY (“YOU” OR “LICENSEE”) AND IZOTOPE, INC. (“IZOTOPE”), YOU (WHETHER AN INDIVIDUAL OR FORMAL LEGAL ENTITY) (HEREINAFTER REFERRED TO AS “YOU”), AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT WITH RESPECT TO YOUR USE OF THE SOFTWARE.
BY INSTALLING AND/OR BY USING THE SOFTWARE, YOU REPRESENT AND WARRANT THAT YOU HAVE THE LEGAL CAPACITY AND AUTHORITY TO ENTER INTO A BINDING AGREEMENT TO ADHERE TO THE TERMS AND CONDITIONS SET FORTH HEREIN, AND THAT THE SOFTWARE WILL BE USED ONLY IN ACCORDANCE WITH THESE TERMS AND CONDITIONS AND WITH ALL APPLICABLE LAWS. IF AN INDIVIDUAL IS REGISTERING OR USING THE SOFTWARE ON BEHALF OF AN ENTITY OR ORGANIZATION, THAT INDIVIDUAL WARRANTS, REPRESENTS, AND COVENANTS TO IZOTOPE THAT SUCH INDIVIDUAL IS DULY AUTHORIZED TO AGREE TO THESE TERMS AND CONDITIONS ON BEHALF OF THE ORGANIZATION AND TO BIND THE ORGANIZATION TO THEM.
LICENSE. Subject to all the terms and conditions of this Agreement, iZotope hereby grants to Licensee a license to use the Software accompanying this Agreement, as well as any presets and documentation provided, whether in printed, “online” or electronic form, either on a stand-alone computer or on a network, on any one computer at any one time. If more than one user will be using the Software at any one time, you must obtain from iZotope additional license(s) for each additional concurrent user of the Software. The Software is “in use” on a computer when loaded into memory (RAM). You may make one copy of the Software solely for backup or archival purposes if all copyright and other notices are reproduced on that copy, or you may copy the Software to a single hard disk provided you keep the original solely for backup or archival purposes. If the Software is an upgrade, you must have a license for the Software from which it is upgraded. If you receive the Software in more than one media, that does not affect the number of licenses you are receiving or any other term of this Agreement.

OWNERSHIP. The copyrights, patents, trade secrets, trademarks, and all other intellectual property rights in the Software and documentation (including any images, photographs, animations, video, audio, music and text incorporated in them) are owned by iZotope or its suppliers and are protected by the copyright, patent and other laws of the United States and other countries and by international treaty provisions. iZotope retains all rights not expressly granted in this Agreement. You shall not remove any product identification, trademark, copyright or other notices contained in or on the Software.

OTHER RESTRICTIONS. You may not modify, adapt, decompile, disassemble or otherwise reverse engineer the Software, except to the extent this restriction is expressly prohibited by applicable law, nor may you create derivative works based upon the Software, or to permit third parties to do so. You may not loan, rent, lease, or license the Software, or use the Software as a service bureau, as an application service provider, to perform consulting or training services for a third party or in any commercial time share arrangement, but you may permanently transfer your rights under this Agreement provided you transfer this Agreement, the Software, and all accompanying printed materials and retain no copies, and the recipient agrees to the terms of this Agreement. Any such transfer must include the most recent update and all prior versions.

LIMITED WARRANTY. iZotope warrants that, for a period of thirty (30) days from the date the Software is made available to you for download, the Software will substantially conform to the applicable user documentation provided with the Software. Any implied warranties which may exist despite the disclaimer herein will be limited to thirty (30) days (“Warranty Period”). This limited warranty is void if you buy from an unauthorized reseller, you violate the terms of this Agreement, or if the failure of the Software is due to accident, abuse or misapplication. Some states/jurisdictions do not allow limitations on duration of an implied warranty, so this limitation may not apply to you.

YOUR REMEDIES. iZotope’s sole obligation and your exclusive remedy for any breach of warranty will be, at iZotope’s sole option, either the return of the purchase price you paid or the repair or replacement of the Software, media and documentation, provided you in all instances return the Software, together with all media and documentation and a copy of your receipt, to the location where you obtained it during the Warranty Period. Outside the United States, neither these remedies nor any support services are available without proof of purchase from an authorized non-U.S. source.

SUPPORT. Subject to the limited warranty stated above, and further subject to you not being in violation of any term of this Agreement, iZotope will provide email support for the Software to the original purchaser, for a period of 12 months from the original purchase date.

REGISTRATION INFORMATION. When you activate the Software, iZotope may collect your name and email address and other contact information you choose to provide. IZotope may use this information to contact you regarding upgrades and new products. iZotope does not collect or retain any financial information (such as credit card information).

USAGE INFORMATION. When you activate and/or use the Software, iZotope may collect certain information about your computer and your interaction with the Software via the internet (“Usage Information”). Usage Information is information on how you interact with the Software, and is then utilized by iZotope for statistical analysis for improving the Software, and to provide you with a more relevant user experience. No direct personal information or audio files/samples are collected as part of this Usage Information. Usage Information is generally collected in the aggregate form, without identifying any user individually, although IP addresses, computer and session ids in relation to purchases and downloads/installations of the Software may be tracked as part of iZotope’s customer order review, statistical analysis, and fraud and piracy prevention efforts. This Usage Information may be sent to an iZotope web or third-party cloud server for storage or further processing by iZotope and/or its partners, subsidiaries or affiliates, including, but not limited to, Google Analytics. The Software includes an opt-out provision if you do not wish to provide iZotope with such Usage Information.

DISCLAIMER. THE SOFTWARE IS PROVIDED “AS IS.” TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EXCEPT FOR THE EXPRESS WARRANTY SET FORTH HEREIN, IZOTOPE DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IZOTOPE DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE SOFTWARE WILL OPERATE UNINTERRUPTED OR ERROR-FREE. THE WARRANTY AND REMEDIES SET FORTH HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR WRITTEN, EXPRESS OR IMPLIED. No dealer, distributor, agent or employee of iZotope is authorized to change or add to the warranty and remedies set forth herein. Any other software furnished with or accompanying the Software is not warranted by iZotope.

LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL IZOTOPE BE LIABLE FOR ANY AMOUNTS EXCEEDING THE AMOUNTS RECEIVED FROM YOU FOR YOUR LICENSE OF THE SOFTWARE, REGARDLESS OF THE FORM OF ACTION, AND WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE (INCLUDING, WITHOUT LIMITATION, DAMAGES OR COSTS FOR LOSS OF PROFITS, BUSINESS, GOODWILL, DATA OR OTHER ASSETS, OR COMPUTER PROGRAMS) EVEN IF IZOTOPE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some jurisdictions do not allow exclusion or limitation of liability for consequential or incidental damages, so this limitation may not apply to you.

TERMINATION. The Agreement will terminate automatically if you fail to comply with any of its terms. On termination, you must immediately cease using and destroy all copies of the Software.

LICENSES TO U.S. GOVERNMENT. This paragraph applies to all acquisitions of the Software by or for the federal government, or by any prime contractor or subcontractor (at any tier) under any contract, grant, cooperative agreement or other activity with the United States government (collectively, the “Government”). By clicking “I ACCEPT”, you are agreeing on behalf of the Government that the Software and any documentation related thereto are respectively “commercial computer software” and “commercial computer software documentation” within the meaning of the acquisition regulation(s) applicable to this procurement. These terms and conditions alone will govern the Government’s use of the Software and will supersede any conflicting contractual terms or conditions. If the license granted by these terms and conditions fails to meet the Government’s needs or is inconsistent in any respect with Federal law, the Government must return the Software unused to iZotope. Contractor/Manufacturer is iZotope, Inc., 60 Hampshire Street, Cambridge, MA 02139.

GENERAL. The export of the Software from the United States and re-export from any other country is governed by the U.S. Department of Commerce under the export control laws and regulations of the United States and by any applicable law of such other country, and the Software may not be exported or re-exported in violation of any such laws or regulations. This Agreement is the complete and exclusive statement of the agreement between you and iZotope and supersedes any proposal or prior agreement, oral or written, and any other communications relating to the subject matter of this Agreement. This Agreement will be governed by and interpreted under the laws of the Commonwealth of Massachusetts, United States of America, without regard to conflicts of law provisions. The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. This Agreement is in the English language only, which language will be controlling in all respects, and all versions of this Agreement in any other language will be for accommodation only.

IN ADDITION, ANY SUCH LEGAL PROCEEDING SHALL NOT BE HEARD BEFORE A JURY. EACH PARTY GIVES UP ANY RIGHT TO A JURY TRIAL. To the extent permitted by law, you agree that you will not bring any class action lawsuit against iZotope or be a representative plaintiff or plaintiff class member in any such lawsuit.

Should you have any questions about this Agreement or iZotope’s software use policies, or if you desire to contact iZotope for any other reason, in the U.S., please email sales@izotope.com; outside the U.S., please contact the iZotope representative or affiliate serving your country or, if you are unsure whom to contact, iZotope at the above location.
Please indicate that you understand and accept these terms by clicking the “Accept” option. If you do not accept these terms, installation will terminate.

January 2018

ライセンス情報

Anti-Grain Geometry

Version 2.4

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the
distribution.
The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS” AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

Better Enums

Version 0.11.1

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

fmt

Version 4.0.0

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

FreeType

FreeType is licensed under the FreeType Project LICENSE.

gsl

This code is licensed under the MIT License (MIT).

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the “Software”), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

IcoMoon

IcoMoon-Free licensed under: CC BY 4.0

JsonCpp

Version 1.2.1

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

LibXML2

Version 2.7.8

Except where otherwise noted in the source code (e.g. the files hash.c,
list.c and the trio files, which are covered by a similar licence but
with different Copyright notices) all the files are:

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the “Software”), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is fur-
nished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON-
NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of Daniel Veillard shall not
be used in advertising or otherwise to promote the sale, use or other deal-
ings in this Software without prior written authorization from him.

Material Docs Theme

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the “Software”), to
deal in the Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.

nanomsg

Version 0.5-beta

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the “Software”),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom
the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.

“nanomsg” is a trademark of Martin Sustrik

readerwriterqueue

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

TinyXML

This software is provided ‘as-is’, without any express or implied
warranty. In no event will the authors be held liable for any
damages arising from the use of this software.

Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:

The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product documentation
would be appreciated but is not required.
Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.
This notice may not be removed or altered from any source
distribution.

Tipue Search

Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

vectorize

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
Neither the name of the nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

ZeroMQ

Copyright © 2007-2015 iMatix Corporation
Copyright © 2009-2011 250bpm s.r.o.
Copyright © 2010-2011 Miru Limited
Copyright © 2011 VMware, Inc.
Copyright © 2012 Spotify AB
Copyright © 2013 Ericsson AB
Copyright © 2014 AppDynamics Inc.

Distributed under the
GNU Lesser General Public License v3 (LGPLv3) with the following
“Static linking exception”:

The copyright holders give you permission to link this library with independent
modules to produce an executable, regardless of the license terms of these
independent modules, and to copy and distribute the resulting executable under
terms of your choice, provided that you also meet, for each linked independent
module, the terms and conditions of the license of that module. An independent
module is a module which is not derived from or based on this library. If you
modify this library, you must extend this exception to your version of the
library.

Full text of the license is available here:
https://www.gnu.org/licenses/lgpl-3.0.txt

To receive a copy of the source code for the ZeroMQ library
distributed with this product under the under the terms of the LGPLv3
please contact devsupport@izotope.com.

zlib

This software is provided ‘as-is’, without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.

Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:

The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.

Jean-loup Gailly jloup@gzip.org

Mark Adler madler@alumni.caltech.edu