Wood Veneer Sheets Cabinet Refacing,Small Reloading Bench Plans,Wood Lathe Tool Rest Holder,Fixed Base Router Uses - 2016 Feature

22.11.2015, admin  
Category: Bookshelf Woodworking Plans

The Non-Adhesive Paper Back Veneer is composed of a wood veneer applied to a paper backing, resulting in a thin product that is easy to work with. The Non-Adhesive Wood Back Veneer is a 2-ply veneer (face veneer is the species specified by the customer and the back is a luan veneer that simply helps balance out the sheet). Securing this veneer can be done by applying solvent or water based contact cement to both the cabinet and veneer in accordance with the manufacturer’s specifications.
The Non-Adhesive Phenolic Back Veneer is stiffer, thicker, and more resistant to dents than both the Paper Back and Wood Back Veneers. The Pressure Sensitive Wood Back Veneer has the same features as the Non-Adhesive Wood Back Veneer, but is supplied with a 3M Pressure Sensitive Adhesive (PSA) applied to the back. When installing this product it is critical that pressure be applied with a veneer-smoothing blade for proper adhesion. Common wood working tools such as table saws, sanders and routers work well with this product.
The Solid Wood Refacing Stock (RFS100) will be the closest match to the grain of the new door. WalzCraft has engineered moldings that coordinate with the use of this material for cabinet refacing. When installing this the PSA 3D Laminate (RTF) it is critical that pressure be applied with a veneer-smoothing blade for proper adhesion. WalzCraft sells only to Custom Cabinet Makers, Cabinet Refacers and Woodworking Professionals.
Veneer cabinet refacing kits organized by species including cherry, maple, and walnut veneers and edgebanding.


Give your dated but sound cabinets a facelift and breathe new life into your kitchen cabinets or bathroom vanities. Additional PSA (peel and stick) veneer sheets and pre glued edgebanding can be purchased separately if you happen to run short.
These options give you flexibility you need for an efficient and quality cabinet refacing installation. Securing it can be done by applying solvent or water based contact cement to the back of the veneer and the cabinet. Depending on the wood species, the veneer may be available in Rotary Cut (RC) and Plain Sliced (PS).
The wood backing is applied to the veneer with a cross grain direction resulting in a flatter more stable product. Many phenolic back materials will leave a black line at the edge or corner of a cabinet; however, our Non-Adhesive Phenolic Back Veneers use a lighter colored phenolic that eliminates this issue.
It is the thinnest of all the refacing materials and is supplied with a 3M Pressure Sensitive Adhesive (PSA) applied to the back. The material thickness makes this product a good choice for strengthening cabinets with thin back and side panels. The material thickness makes this product a good choice for strengthening cabinets with thin backs and side panels. Unlike the Paper Back Veneer, this product is suitable for both face frame applications and for covering larger surfaces such as the sides of cabinets.
The phenolic backing acts as a barrier between the glue and the veneer, eliminating any chance of the finish being affected by any solvent based products bleeding through the veneer during the installation process.


This product is most suitable for covering face frames and other small areas of the cabinet.
They come in four sizes and include everything you need to make your cabinet refacing project simple.
Unlike the PSA Paper Back Veneer, this product is suitable for both face frame applications and for covering larger surfaces such as the sides of cabinets.
For the sides of the cabinet or larger surfaces, we recommend a stiffer material such as the Non-Adhesive Phenolic back 3D Laminate (RTF) Veneer. Each kit comes complete with a sheet(s) of peel and stick veneer, hot melt adhesive edge banding, a veneer scraper, a snap off blade utility knife, and other useful accessories.
The durability and reparability are two additional features that solid wood refacing stock is known for. Following the thorough and comprehensive instructions you can easily put a new face on your old cabinets and vanities.
The veneer and edgebanding will accept stains and finishes well so customizing and matching colors is also a snap.



Woodworking supplies syracuse ny
Must Need Woodworking Tools
Lumber for woodworking projects
Woodworking tools estate sale


Comments to “Wood Veneer Sheets Cabinet Refacing”

  1. 5544:
    (OT) permits Woodworking Contractors to efficiently increase collaboration.
  2. QuSHBaZ:
    Discovered a 2ND floorplan inadequate so I used Sketchup to make a 3D shop plan on-line you'll get.
  3. SANKA_ZVER:
    You most with very good individuals administration talent with minimal.
  4. BOMBAOQLAN:
    Pursuits of artwork, science, and supplied.