Uv Wood Coatings Market,Moddi Murphy Bed Instructions Download Free,Country Woodwork Kitchens - PDF Books

13.11.2013, admin  
Category: Yard Furniture Plans

The natural beauty and timeless elegance of wooden surfaces give them a special place in modern interior design.
Together with other partners in the market, raw-material suppliers are requested to offer solutions to the various problems.The UV Market Worldwide consumption of radiation-curable acrylates in 1998 accounts for approximately 100,000 tons, with the majority in the United States and Europe (see Figure 1). At the beginning of radiation curing in the early 1970s, unsaturated polyesters dissolved in styrene dominated the market; they are still of major importance due to cost reasons. Developments in the field of radiation-curable powders are aimed at the coating of wood and metal. The global wood coating market, along with its resin types, applications, and technologies is estimated to increase in the coming years.
The wood coatings market is experiencing moderate growth which is expected to continue in the near future, mainly driven by the highly growing Asia-Pacific, and RoW regions. This study aims to estimate the global market of wood coating for 2015 and to project its demand by 2020. Competitive scenarios of the key players in the wood coating market have been discussed in detail.
The global wood coating market, along with its resin types, technologies, and applications, showed a significant growth in the past few years and is estimated to continue in the coming years. Currently, the Asia-Pacific region is the largest consumer of wood coating and is estimated to register a high CAGR. The growth of the end user industries, green environmental regulations and better properties of wood coatings is driving the growth for this market.
The Asia-Pacific region is the most active markets in terms of strategic initiatives, owing to their emerging market demands.
The significant wood coating manufacturers in include Akzonobel, Valspar Corporation, Asian Paints, Sayerlack, RPM International, Sherwin-Williams, Kelly-Moore Paint Company Incorporated, Katilac Coatings Inc., Ashoka Group, and Sterling Polymers and Chemicals, and others. This report covers the wood coating market by key regions and important countries in each of these regions. Key segments for the wood coatings market include siding and decking, furniture and cabinets. Thanks to a rise in the housing market, the wood coatings market has seen steady gains in recent years.
According to Jacquelyn Ferrara, Director of Marketing at Minwax, improvements in the housing market have lifted sales in many related categories.
While the entire wood coatings market saw growth in the past year, Mike Kozlowski, Director of Marketing at Thompson’s Waterseal Brand said that one area in particular has seen growth because of heightened competition. According to Kozlowski, effective waterproofing to protect exterior wood like a deck or fence from water damage continues to be critical. As with any other home-related product, the wood coatings market is influenced by color trends. Wood coatings manufacturers have released several new products to meet various consumer demands.
To that end, Kozlowski said that the line offers elastomeric properties, which helps the stain expand and contract with the wood during temperature fluctuations over time, reducing cracking and peeling. Thompson’s WaterSeal Waterproofing Stain Aerosol combines exterior wood stain and sealer all in one, creating a formula that prevents water damage with just the push of a button.


August 9, 2005 Our annual report profiling the top paint, coatings, adhesives and sealants companies in the world. In Japan over 50% of the radiation-curable coatings go into the electronics and glass fiber industries. The closely crosslinked UV coating also gives greater chemical resistance than a physically dried, partially resoluble NC coating.Outlook There are good chances for successful further growth of radiation curable wood coatings. The properties, such as durability, protection, high scratch resistance, chemical resistance and others, green environmental regulations, and increasing construction and furniture market will be the key influencing factors for global wood coatings market. The drivers of the industry are superior performance; better properties, green regulations, growth in furniture and construction market, and others.
It provides a detailed qualitative and quantitative analysis of the global wood coatings market. In order to provide an all-round picture, the current market demand and forecasts have also been included. An increase in the demand in Green environmental regulations, high demand for durable coatings, and superior performance of wood coatings will be the key influencing factors for the global wood coating market.
The countries, such as China, India, Japan, and South Korea are expected to lead the Asia-Pacific wood coatings market; with China having the largest share in the regional volumetric consumption of wood coating market. It also provides a detailed segmentation of the wood coatings market on the basis of different resin types, technology, applications up to 2020. In fact, according to Phil Phillips, President of CHEMARK Consulting, a growth of about 3.1% over the next 15 years is expected for the aggregate of wood protective and preservatives from $3100 million in 2013 to $4900 million by 2028. For decks, real wood continues to make up more than 80% of surfaces, and you can extend the life of the wood by years with regular maintenance, consisting of cleaning and reapplying a waterproofing deck stain. Consumers continually demand faster, better solutions to problems, and wood coatings manufacturers aim to meet their needs. Forging partnerships with customers is the key to success, say industrial wood coatings manufacturers.
Intermediate sanding is therefore usually carried out prior to application of the topcoat.Examples For Mixed Systems -Parquet Coatings The requirements like abrasion resistance can be met by different systems. This terms refers to the darkening of the end faces of the wear layer as a result of penetrated liquid coating material, which undergoes inadequate interaction with UV light during exposure and is therefore not fully cured. The growth of the architecture and construction sector is driving the growth for this market in this region.
We have used various secondary sources, such as directories, industry journals, and databases to identify and collect information useful for this extensive commercial study of the wood coatings market. These include wood coatings manufacturers, such as Akzonobel, Valspar Corporation, Asian Paints, Sayerlack, RPM International, Sherwin-Williams, Kelly-Moore Paint Company Incorporated, Katilac Coatings Inc., Ashoka Group, and Sterling Polymers and Chemicals among others. In the next few years, waterborne technology is estimated to contribute major share in wood coating market; due to the government regulations to decrease the level of VOC in the environment. The market size in terms of volume of wood coatings is comparatively low in the Western European region, but is estimated to grow at a moderate CAGR between 2015 and 2020.
Now and in the future, changes in wood coatings technologies will take place in industrialized countries. In the European market, the principal field of use for radiation-curable coatings is the wood coatings industry.With a volume of 430,000 tons, industrial wood coatings represent 16% of the industrial coatings market in Europe (see Figure 3), and are in third place behind automotive and general metal coatings.


This new technology is just beginning and seems to be especially suitable for coating of MDF.In Table 2, all of the necessary components of a radiation-curable coating material are listed. After the end of this first reaction, the excess NCO groups remain, and following application react with the hydroxyl groups in the wood forming true chemical bonds to the substrate. Further developments in all areas of raw materials, application technologies and curing equipment will contribute to a global dissemination of radiation curing for wood coatings. The primary sources experts from related industries and suppliers—have been interviewed to obtain and verify critical information as well as to assess the future prospects of wood coatings. The change is created by increased requirements concerning the surface quality and tighter regulations on environmental issues in all sectors of production and application of coatings.
Special requirements must be fulfilled by furniture coatings since their surfaces have to be odorless and free of any long-term emittable substances.
Companies belonging to international concerns cover 40% of the market.Solvent-based systems still represent 75% of the total wood coating market (see Figure 4). Polyurethane (PU) coatings have the biggest share with 35%, whereas CN- and acid-curing systems will lose market share due to more stringent VOC regulations.The share of radiation-curable coatings based on acrylates and unsaturated polyesters accounts for approximately 10% with considerable regional differences (see Table 1). There is a direct correlation between the choice of base material and the viscosity of the coating material, the target coat thickness and the application technique, and the substrate geometry (planar or 3D).
The coating of planar substrates using troweling, rolling or casting machines guarantees the greatest efficiency and also fits in well with the geometry of the UV sources (see Table 3). Independently of this, the coating of 3D substrates with radiation-curable coating materials is also on the increase.
An example which may be mentioned in this instance is the industrial spray application of UV-curable water-based coatings to chairs. By way of example, some of the possible combinations will be mentioned here, and their technical advantages highlighted.Waterborne Coating + UV Coating On highly absorbent substrates in particular, the UV coating material may be lost by deep penetration.
In addition, more and more users are using a vacuum-coater for wood profiles, for example.Radiation-Curable Wood Coatings The coating system for wood is subject to a variety of requirements that can only be met by combining different layers of coating materials. The consequence is that the UV coating material present within the substrate does not come into contact with UV light, and avoids polymerization. For this reason it is advisable to seal MDF boards, for example with an aqueous dispersion lacquer prior to UV coating.UV Coating + Waterborne Coating In contrast to conventional waterborne coating materials, 100% UV materials produce much greater grain highlighting on wood. The adhesion-promoting effect, which is manifested in a good coin test, is achieved by partial swelling or erection of the wood fibers. This operation increases the surface area and therefore offers increased possibilities for mechanical anchoring of the coating to the wood.
Only one UV unit is then required in the production line.UV Coating + NC Coating The low solids content of a nitrocellulose (NC) lacquer necessitates a large number of applications in order to achieve a relatively high application rate. Subsequently, a single NC coat is applied, after sanding, to provide the desired sensory properties of the surface.UV Coating + PU Coating Following application of the UV coats by means of rollers, the rolled structure is removed by appropriate sanding machines. The practicability of such systems under increasingly stringent solvent emission limits in the future is highlighted by the comparison of an NC with a UV coating (see Tables 6-7).



Platform Bed Frame Building Plans
Sliding Bookcase Door Hidden
How To Make A Gun Cabinet From Wood
Coffee Table Designs And Plans


Comments to “Uv Wood Coatings Market”

  1. Pussycat_Doll:
    Going to catch even the smallest dimensional or design error materials, and searching for good pieces of wooden.
  2. akula_007:
    For this mission you may want an unfinished wood base that's.
  3. Inda_Club:
    Processing, execution, finishing, shipping chicken feeders plans in the members.
  4. rumy22:
    That using a furniture design software program program time and a few them.
  5. Svoyskiy:
    Plans are there in Ted Woodworking Plan excessive amount.