Rustic Wood Stain,Diy Wooden Boxes,Wood Picture Frame Design Ideas,How To Make Wood Deck Stairs - PDF Review

17.09.2015, admin  
Category: Bookshelf Woodworking Plans

At this point, if you're not into the whole "barn wood look", then you can just stain it, or paint it whatever color you want! I used the back of the hammer for the top of the table, and the front part of the hammer to bang up the wood around the edges a bit, so it didn't look so 'perfect'. After you've got your desired barn wood look, sand down your surface very lightly to get rid of any rough paint splatters or bits that may have been left behind. The last step is to apply another coat of your Olympic weathered barnboard stain to the top of your wood. If you watched the video, you can also catch a couple of techniques that I forgot to photograph: namely dragging a paint can opener to make long smooth scrapes down the length of the board (another effect that I really liked after stain was applied) and making those nail punch holes that I mentioned earlier. Our materials included rubber gloves (because stain is messy), a cheap $1 paint brush (because stain is messy and tends to ruin good brushes) and spare rags to wipe up excess stain (because stain is… well, you know). The only thing we didn’t like was that we wanted to get some boards even lighter than the stain seen on the above left (which was applied thinly and then wiped away immediately). Truth be told, I used to think making wood look old was cheesy, but you did such an awesome job that I may just change my mind. I think rounded edges help give a piece that worn, rustic look, so I do that on lots of my wood projects.
I applied the stain with a little foam brush and let it sit for about 10 minutes before wiping away any excess stain that hadn’t seeped into the wood.


This made the stained wood around the heart get really hazy, which was kind of a bummer but also looks kind of cool too. For starters, I picked out as many pieces of wood from Home Depot that already had flaws or interesting details to them – knots, chips, dark stripes, whatever. Since stain catches and collects in all of these dents and dings, it tends to accentuate them (which is a good thing, in this case). After sanding it down again it really started to look like the wood was slightly rotted, just like some of the spots on the pallets that we couldn’t use (more on that here). And for more of that varied and timeworn feeling, Sherry tag-teamed the boards with two different stain colors – Ebony (which we picked up for $4 in a tiny can at Home Depot) and Dark Walnut (which we already owned and had used for staining the bottom of the console). Keeping in mind that we wanted a fair amount of variation from board to board, Sherry did a few tests first to see what each of the stains looked like with a light coat of stain (wiped off quickly) and a heavy coat (which was allowed to penetrate for a bit longer).
We thought the dark walnut would help it relate to the bottom of the console (as well as some of the other dark woods in the room) while the ebony would be a closer match the the gray pallet boards that originally inspired us. I guess I can justify decorating for Valentine’s Day if it’s something that stays out all year! After letting the stain dry for about an hour, I sanded the wood again, focusing on edges and corners, until it was distressed to my liking. I placed the paper heart on the wood at a slight angle and traced around it with a pencil, pressing hard to create an indent in the wood.


And after I had taken out all of my aggression worked my new-to-old magic and had given everything one last light sanding (to ensure a smooth and not splintery finish), it was time for Sherry to take over for the staining portion of The Console Table Show.
Basically she pre-washed the board with a light coat of plain water, let it soak in for a couple of seconds, and then went over the still-damp board with a light coat of stain (that way it soaked up less color thanks to the water that it absorbed first). So we were thrilled with the colors and the variations that we landed on, thanks to staining some and allowing the stain to penetrate a while, wiping it down right away on other boards, and using the water technique above to get some lighter variations.
I wanted to make sure that I didn't miss anything important that you may need to know, when attempting this barn wood look on your own.
This rustic wood sign turned out even cuter than I pictured in my head, and I’m so excited to share it with you guys! For those who’d like more info, you can see this entire technique in action on the staining video. The starting point, as you probably recall, was a pristine pile of freshly bought 1 x 4″s that I cut into 2 foot lengths.



Best Type Of Wood For Walking Sticks
Woodworking Cnc Machines India
Woodworking machines manufacturers in turkey
Plans For Wooden Toy Excavator


Comments to “Rustic Wood Stain”

  1. Koshka:
    Choose to your woodworking tasks is critically and ideas for very own picket.
  2. Sevimli_oglan:
    That all bases are coated and the kind in re house that superego don't wish to purchase.
  3. Henry:
    Specially formulated to look and taste like spend.
  4. LEDI:
    Among the tools and gear that are needed scrap wood and most.
  5. XOSE111:
    ´╗┐Simple To Build Log Furniture Plans House enchancment shops pick up one or 2 books while construct.