The unitized systems can be used to cut areas as small as 5'x10' up to 8'x20'. You can order gantry systems up to 20'x100'. There are many options available, including AutoGas and pipe cutting, oxyfuel cutting, drilling. Also, full contour plasma bevels with 5 axes can be used.

* This cutting speed chart is preliminary and subject to change at any time. Please compare all data. These speeds are the fastest, and the same applies to all Thermal Dynamics competitors' cut speeds. Although cutting speeds can be increased, bevel angle and edge quality may be affected. This chart shows the capabilities of the new consumables used, the correct gas settings and torch height control. The torch was placed perpendicularly to the workpiece. This operating chart does not include all the processes that can be used with Auto-Cut 100.

Victory TS, a CNC plasma cutting system for light-duty use, is based upon Victory's existing heavy-duty industrial systems. The dual-side drive is made of 10-gauge stainless steel. The TS includes a welded tub that has a solidly mounted gantry. It is a complete unit, ready to use: the plasma and controller are installed and tested before being shipped.

Your plasma CNC will have a better performance when you add Auto-Cut. This is for both mild steel and nonferrous materials. You can always trust the power supplies for their low cost operation. Auto-Cut machines are simple to operate thanks to features like TD’s XT301 machine status message center and consumable parts cartridge TD's XT301.

You can watch our video and then look through our gallery of CNC Plasma Cutting Systems. They were designed to meet specific customer needs.

Our CNC plasma systems include everything you need. As standard equipment, they include the following: automatic torch high control, automatic torch collision protection, helical-planetary drive gear box, pneumatic pretensioning, emergency stop switches, and pneumatic pretensioning. The plasmas, controllers are installed and tested before being shipped. We can ship and install complete systems, ready for production, while other companies try to finish the system on your factory floor.

Self-Centering parts: Pertinent engineering of consumables parts and torch body so that they lock in position for absolute alignment and remain perfectly placed cut after cut. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

The Victory Bridge system is the top in plasma cutting technology. It features all Hypertherm software and components. Standard features include integrated torch height control with torch collision protection and laser locator. Full motion Hypertherm Phoenix software is also available. Bridge Systems utilize a minimum three 750-watt power servos. Motor sizes change according to the width and length of the vehicle.

Add the Autocut O2 series systems to any CNC ez Router plasma machine and you will have virtually drossless cuts and excellent high speed oxygen cutting. Thermal Dynamics also used MaximumLife consumables to design this plasma cutting system. The Auto-Cut CNC plasma cutters offer the best parts and life expectancy in their class.

The cutting thickness depends on the material being used, i.e. The type of materials. Laser cutters are capable of cutting materials in the range of 0.5mm - 15mm. The laser parameters and the material properties will play a major role.

Victory Unitized CNC Plasma System includes a worktable that is structurally double-framed with a welded 3/16" walled tub. It is built on a W4x13 framework to withstand harsh industrial environments. A smooth and precise guide system is made up of heavy 'T' rails and a helical rack with 2'’ steel rollers along the rail axis. Dual linear slides are also used on the cross-axis.

The type of material being cut determines the thickness of your cutting. The material being cut. Many laser cutters operate in the range of 0.5mm to 15.mm. This is dependent on the laser parameters and material properties.

The thickness of the cutting depends on what is being cut, i.e. the type of materials. Many laser cutters work in the range between 0.5mm to 15mm, and this will depend strongly on the laser parameters and the material properties.

Victory CNC Plasma Systems, an OEM of industrial CNC plasma cutter systems, is an original equipment producer (OEM). All our CNC plasma cutting systems are made in America and we stand behind every product we sell.

No Leaks Head: This torch head is designed to prevent coolant from dripping from the torch when the consumables cartridge has been removed. This prevents air from getting trapped in the leads and preventing it from entering the system.

Victory Bridge CNC plasma system has a floor-mounted dual side drive welded bridge that can be mounted over a water cutting or downdraft bed. This system supports full sheets 3" plate from 5' x 10’ to 20'x 100'. These machines are also available without a cutting table to be used over existing or custom-built cutting tables. Victory can provide drawings from the factory for any buyer-built worktables. This system comes complete with all Hypertherm plasma components. It includes the bridge mounted EDGE Connect TC Controller, HPR and XPR plasma cutters. Autogas, True Hole and plasma marking. The options include a 3/4hp to 3hp CNC drill and multiple oxyfuel torches. A 16" outboard tube cutter, a 5-axis full contour, or SnapLoc straightline bevel, as well as a 3- or 4-hp CNC drill. Systems start at $189,000.

The primary drawback of laser cutters is their cost compared with competing technologies such as plasma cutting, waterjet cutting, mechanical cutting, sawing etc. That said laser cutting can actually be more economical on large volume projects requiring precision. The savings would come from lower maintenance costs, limited consumables and minimized scrap. Laser cutting will also require some training for expert operation of the machine even though most modern laser cutting machines are very user friendly.

Our CNC plasma machines are completely turn-key. They include all of the optional equipment that competitors charge, including automatic torch height control, automatic torches collision protection, helical drive gear boxes, pneumatic pressure sensing, and emergency stop switches. Plasmas and controllers come installed and tested before they are shipped. We install complete systems and ship them ready to go. Other manufacturers will finish their system on your plant floor.

It will have the maximum plasma cutting capabilities for O2/Air on mild steel. You will also enjoy unbeatable parts live and cut quality. It is capable of cutting edges up to 3' (75mm), on mild-steel. This tool will increase your productivity and make it more profitable.

Watch our video and then browse our gallery of CNC Plasma Cutting Systems. These systems were created to meet the needs of customers like yourself.

The laser beam can be dangerous when coming into contact with skin or in case of a direct eye exposure. Most laser systems have safety features to mitigate this. Additionally, fumes created during laser cutting can be hazardous and care must be taken to extract them through a special fume extraction unit. The level of toxicity of the generated fumes will largely depend on the materials being cut.

Be sure to think about your application before buying a laser-cutting machine. How will you cut the objects and materials? Is laser cutting your only option? Would you prefer to also drill and engrave objects with your laser cutter? Many laser cutters have multifunctional capabilities. You'll want to find the one that best suits your needs. It is important to determine the area you are working in, as well the laser specifications. This includes the wavelength, power, repetition rate, assimilation capabilities, aswell as the CNC. After you have defined all parameters, it is time to evaluate your budget and compare it to other technologies.

The material being cut will determine the thickness of the cutting. The type of material. Laser cutters can work with materials ranging from 0.5mm up to 15mm. This will depend on the laser parameters as well as the material properties.

Victory Rail and Gantry systems also include True Hole. This is a plasma-cut hole that was built from scratch. Each industrial CNC rail system is built in-house. It ships fully assembled with a plasma cutter, controller, and has been tested thoroughly before being shipped.

Self-Centering Parts: Exact engineering of the torch body and consumable parts to ensure they lock in place and remain in place cut after cut. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

Relaxed cutting parameters. The XT-301 operates with a +/-30% travel speed variance. This means you can get great cuts a lot more often, reducing time and materials.

* Please note that the cutting speed charts above are preliminary data. They can be changed without notice. It is important to compare other data. As with all Thermal Dynamics competitors, the speeds listed above are the best. While cutting speeds may be higher, edge quality and bevel angle can be compromised. These capabilities were achieved by using new consumables and correct gas and current settings, precise torch height control, and placing the torch perpendicularly to workpiece. The Auto-Cut 100 operating chart doesn't list all possible processes.

The Victory Unitized CNC plasma system is an excellent choice for those looking to purchase a turnkey industrial plasma system. This dual side drive system features a W4-13 welded frame with 3/16” plate downdraft or water cutting bed supporting full sheets of 2” plate, all welded steel gantry, Yaskawa servo motors and comes in sizes from 5’ x 10’ through 8’ x 20’. This system features the EDGE Connect TC controller and your choice of any of the fine line of Hypertherm liquid cooled plasma power supplies, MAXPRO200, HPR400, or XPR170 and 300. Systems start at $129,700 with MP200. Options include ProNest, True Hole, 3/4hp drill, ox-fuel torch, and SnapLoc straight-line bevel.

All our installations include on-site training at no extra charge. Our CNC plasma systems feature remote login for training or troubleshooting so we can help you any time. Our service technicians are available via telephone and Internet for technical support, diagnostics, and service assistance. We offer field service as required, in or out of warranty.

The Consumables Cartridge contains consumable parts and no torch body. The process of changing a cartridge takes only a few seconds. It takes only minutes to change a cartridge and can be done quickly and easily.

Relaxed Cutting Perameters: The operating window of the XT-301 permits a +/- 30% travel speed variance. Meaning that you'll get great cuts more often, reducing waste on time and materials time.

We have unmatched CNC Plasma Cutting Systems that are used in many industries. Our systems are tailored to your specific requirements.

Unitized systems offer cutting areas of 5'x10ft to 8ftx20ft. Our gantry systems can be ordered in sizes up 20' x 100. AutoGas is available for pipe cutting and oxy-fuel cutting. Drilling, full contour 5-axis plasma beam, and straight line plasma bevel are also options.

All of our installations come standard with training on site. Remote login is an option on our CNC plasma systems. This allows us to help you at any time. Telephone and Internet service are available to provide technical support, diagnostics, or assistance. We provide field service depending on the warranty.

The Victory TS version of our regular industrial CNC system is lighter duty. The TS can be used by trade schools as well as those who want to purchase a lighter industrial cutting system. Victory TS comes with a welded down or water draft table, full sheets of 1"-plate, adjustable water level, an all steel gantry, dual-side servo drive, Hypertherm Connect controller and Victory enclosure. It can be ordered in three sizes, a 6'x10ft or 6'x12ft with a water-cutting or downdraft bed. This is NOT to confused with a bolted together, stepper-powered hobby tables! Systems begin at $49,000. ProNest LT and Ox-fuel torch are options.

Self-Centering components: The precise engineering of consumables and torch bodies ensures that they lock into place to maintain absolute alignment. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

If the laser beam comes into direct contact with skin or the eyes, it can pose danger. Many laser systems include safety features to protect against this. The fumes that are generated by laser cutting can prove to be hazardous. A special fume extraction unit is required to remove them. The materials being used will play a major role in determining the degree of toxicity of the generated fumes.

Ultra-Cut 100 plasma cutting machine is perfect for robotic CNC applications. This plasma cutting system is ideal for high end production. The Thermal Dynamics Ultra-Cut 100 is a top-of-the-line CNC machine.

You don't need any tools! It couldn't be easier or faster! There are no tools needed to change consumables or major components of the torch head.

Your production time and capability for traditional cutting of mild steel or non-ferrous metals can be improved. Thermal Dynamics Autocut 30O2 CNC plasma machine upgrade for ez Routers can make the job much simpler, quicker and more precise.

Laser cutting can be described as a high-precision cutting technology that employs a focused laser beam to cut various materials. Laser cutters' cuts are extremely precise due to the precise nature of laser energy deposition via a laser beam. Laser cutters have the highest precision cutting capabilities on the market, thanks to their CNC capabilities. Laser cutters can produce extremely smooth edges and can be used to cut many objects without causing damage or warping the surrounding materials.

Laser cutting is based on the energy emitted by the laser beam onto the material. A laser cutter can cut wood, paper, cork and other materials depending on its wavelength. However, not all materials can cut with any particular laser cutter. Laser wavelength, output speed, cutting speed, repetition rate, and output power all impact the ability and quality of a laser-cutting machine.

No tools are required There are no tools required! No tools are required to change consumables, or other major components in torch heads.

Victory TS is a CNC plasma cutting machine that can be used for light-duty applications. It is based on Victory’s industrial systems. The dual-side drive system, made from 10-gauge Steel, is constructed. The TS is a welded tube with a solidly attached gantry. It's a complete turn-key unit. The controller and plasma are installed before shipment.

Our CNC plasma systems are complete and turn-key. They include (as standard equipment) all the ‘extras’ our competitors charge you for: automatic torch height control, automatic torch collision protection, helical planetary drive gear boxes, pneumatic pre-tensioning and emergency stop switches located where they should be. Our plasmas and controllers are installed and tested prior to shipment. We ship and install complete systems that are ready for production while other manufacturers try to finish their system on your factory floor.

You'll find the Ultra-Cut 100 plasma cutting system ideal for robotic CNC applications. For high end production, this is your answer. Best in its class, the Thermal Dynamics Ultra-Cut 100 can be added as an upgrade on any one of ez Router's CNC machines.

Unitized systems feature cutting areas from 5’ x 10’ to 8’ x 20’. Our gantry systems are available in sizes up to 20′ x 100′. Available options include AutoGas, pipe cutting, oxy-fuel cutting, drilling, full contour 5-axis plasma bevel, and straight-line plasma bevel.

Hypertherm's standard-definition Powermax, MAXPRO200 and high-definition HyPerformance families of plasmas as well as the XPR family are all available. Hypertherm offers excellent EDGE Connect controllers, torch height controllers and True Hole(r),(r), ProNest (r)LT(r), RotaryTube[r]) HVAC software.

Add Auto-Cut to your plasma-cutting machine and you will get economic performance for mild steel and other non-ferrous materials. Power supplies are low-cost and easy to use. Auto-Cut is easy to use thanks to features such TD's XT301 consumable part cartridge and machine status center.

Our CNC plasma systems can be turned-key and are fully functional. They come standard with all the "extras" our competitors charge: automatic torch height control and automatic torch collision protection. Before shipment, our plasmas and controllers have been installed and tested. We install and ship complete systems ready for production, while other manufacturers attempt to finish their system at your factory floor.

The Victory Bridge systems offer the very best in plasma cutting technology. They have all Hypertherm components, software, True Hole, and are fully integrated from start to finish. Standard features include automatic torch height control and torch collision prevention, as well as full motion Hypertherm Phoenix program. Bridge Systems need at least three 750 watt servos. Motor sizes rise as motor width and length dictate.

Relaxed cutting parameters: The XT-301's operating window allows for a +/- 30 mph travel speed variance. This means that you will get great cuts more often and reduce waste time and material time.

The Ultra-Cut 100 plasma cutter system is ideal for robotic CNC applications. This is the ideal solution for high-end production. The Thermal Dynamics Ultra-Cut 100 is the best in its class and can be added to any of the ez Router's CNC machines as an upgrade.

The Victory TS is a light-duty CNC plasma cutting system based on Victory’s regular heavy-duty industrial systems. The dual-side drive system is constructed of 10-gauge steel. The TS features a welded tub with a solidly mounted gantry on top. It is a complete, turn-key unit: the controller and plasma are installed and tested prior to delivery.

Laser cutters' primary disadvantage is their high cost, compared to competing technologies like waterjet cutting and mechanical cutting. However, laser cutting is often more economical for large projects that are precise and require high volumes. Lower maintenance costs, minimal scrap and limited consumables would all result in savings. While most modern laser cutting machines are easy to use, laser cutting requires some training.

Laser cutters have a major drawback. They are expensive compared to other technologies, such as waterjet cutting or mechanical cutting. However, laser cutting can be more affordable for large-scale projects that require precision. Laser cutting would result in lower maintenance costs, reduced consumables and less scrap. Although most laser cutting machines can be operated by anyone, you will need to have some knowledge about laser cutting.

All of our CNC plasma systems come fully assembled and ready to use. As standard equipment, they include all the extras that our competitors charge for: automatic torch height controls, automatic torch collision prevention, helical planet drive gear boxes and pneumatic pretensioning. Emergency stop switches are located exactly where they need to be. All plasmas and controllers are tested and installed before shipment. While other manufacturers finish their systems on the factory floor, we ship and install complete systems.

* This cutting speed chart is preliminary and subject to change at any time. Please compare all data. These speeds are the fastest, and the same applies to all Thermal Dynamics competitors' cut speeds. Although cutting speeds can be increased, bevel angle and edge quality may be affected. This chart shows the capabilities of the Ultra-Cut 100. It was created using new consumables and correct gas settings. The torch height control was also accurate. This operating chart does not include all the processes that can be used with Ultra-Cut 100.

Victory Rail CNC plasma is a floor-mounted system with knee-high rails. The dual-side drive steel system gantry supports full sheets of 3 inch plate from 5 feet x 10 feet to 10 x 30 feet. This dual-side drive system comes with all Hypertherm components. These include the EDGEConnect TC controller and your choice from HPR or XPR plasmas with Autogas. True Hole. Plasma marking is also possible. These machines are also available without a cutting table to be installed over existing or custom-made cutting tables. Victory will provide the factory drawings for custom-made work tables. 3/4hp CNC Drill, multiple oxyfuel torch torches, multiple plasma cutters, 12" outboard tube cutter, SnapLoc straightlinebevel, and off table cutting are some options. Systems start at $162,000.070 with the XPR170.

Ultra-Cut 100 plasma-cutting system is ideal to use in robotic CNC applications. This system is perfect for high production. The Thermal Dynamics Ultra-Cut 100 is best in its category and can be upgraded to any of the CNC machines by ez Router.

No Leaks Head - Designed to ensure that coolant does not drip from the torch head after the consumables cartridges are removed. This prevents air from entering and becoming trapped in the leads.

No Tools Needed! Could it be any faster or easier? No tools required for changing consumables or any major components in the torch head.

No Leaks Head. Designed to make sure there is no coolant dripping from torch head after consumables cartridge is removed. This also prevents air escaping from the system and getting stuck in leads.

High Quality Plasma Cutting on All Metals: The dual-gas technology of the XT-301 torch produces a high arc plasma cutting stream on all metals, including mild steel, stainless and aluminum. Plasma gas options include O2, N2, Ar, H2, and Air.

The Victory Rail CNC plasma system features floor mounted, knee-high rails, dual-side drive steel gantry system that rides over a downdraft or water cutting bed supporting full sheets of 3” plate ranging from 5’ x 10’ to 10’ x 30’. This dual side drive system features all Hypertherm components, including the EDGE Connect TC controller and your choice of HPR or XPR plasmas with Autogas, True Hole, and plasma marking. These machines are available without the cutting table for installation over existing cutting tables or buyer built cutting tables. Victory will supply factory drawings for buyer-built work tables. Options include 3/4hp CNC drill, multiple oxy-fuel torches, multiple plasma cutters, 12” diameter outboard tube cutter and SnapLoc straight-line bevel, off table cutting. Systems start at $162,070 with XPR170.

If you are looking for a complete industrial plasma system, the Victory Unitized CNC Plasma system is a great choice. The dual-side drive system has a W4-13 welded frame that supports full sheets of 2” plate, all-welded steel gantry and Yaskawa motors. It is available in sizes from 5’ x 10’ through 8’ x 20’. The system includes the EDGE Connect TC controller, as well as any of the Hypertherm liquid cooled Plasma power supplies (MAXPRO200, HPR400 or XPR170 &300). Systems starting at $129,700 for MP200. ProNest, True Hole and ox-fuel torch are some options. SnapLoc straight line bevel is also available.

Laser cutters are more expensive than other technologies like plasma cutting, waterjet, mechanical cutting, sawing, etc. Laser cutting is more cost-effective for large volumes of projects that require precision. You will save money by using fewer consumables, reducing maintenance costs and minimizing scrap. Even though laser cutting machines are extremely user-friendly, it will still require some training to be proficient in its operation.

No Leaks Head: Designed so you have no coolant drips from the torch head when the consumables cartridge is removed. This also stops air from entering the system and getting trapped in leads.

Victory Unitized CNC plasma systems are a good choice for anyone looking to buy an industrial plasma system. This dual-side drive system is W4-13 welded and features a 3/16" plate downdraft, or water cutting, supporting full sheets 2" plate, all welded gantry, Yaskawa, servo motors, and can be ordered in sizes ranging from 5'x10' to 8'x20'. This system comes with the EDGE Connect TC control and any of the Hypertherm liquid cooled, plasma power supplies. Systems start at $129,000. ProNest and True Hole options include 3/4hp drills, ox fuel torch, and SnapLoc straightline bevels.

Increase your production capabilities and time for non-ferrous material and mild steel cutting. Thermal Dynamics Auto Cut 30O2 CNC plasma systems are an upgrade option to any one of the ez Router's plasma machines. They make cutting much faster, easier, and better quality.

The Auto-Cut O2 series systems are a great addition to any ezRoder CNC plasma machine. They provide excellent high-speed oxygen cut and virtually no dross. Thermal Dynamics has used MaximumLife consumable parts for the plasma cutting system. The Auto-Cut CNC plasma cutters offer the best part life in their class.

The Consumables Cartridge is a unique container that houses consumable parts. There's no torch body or head to increase replacement costs. It is quick and simple to change a cartridge. Just a few twists and the unique "rapid engagement" retaining collar threads will release it. You can quickly change between processes or applications, and downtime is reduced to just minutes.

The most advanced torch technology today! XT Technology, which is patented, can only be used on Thermal Dynamics CNC Plasma Cutting Systems. The Consumables cartridge houses consumables only. No torch body or built-in head means that replacement costs will rise. A few twists, and the unique 'rapid-engagement' retaining collar threads allow you to change the cartridge quickly. The downtime is minimal and it's easy to switch between applications or processes quickly and easily.

Quality Cuts on All Metals: The dual gas technology on the XT-301 torch gives a high arc density plasma cutting stream on mild steel, stainless steel, aluminum and other non-ferrous materials. Choices for plasma gas include O2, N2, Ar-H2, or Air.

Victory CNC Plasma Systems (OEM) is an original equipment manufacturer of industrial CNC plasma cutting machines. All of our CNC plasma systems are built in the USA and all products are supported by us.

Direct eye contact or skin contact can make the laser beam dangerous. This is a common problem with laser systems. Laser cutting can produce dangerous fumes. To remove them, a special fume extractor must be used. The materials that are being cut will have a significant impact on the level and toxicity of the fumes.

Hypertherm's high-definition Powermax and MAXPRO200 plasmas are available in systems. Hypertherm also offers the excellent EDGE Connect controller and torch height controllers.

Victory Rail and Gantry Systems include True Hole. It was specifically designed to ensure the best plasma-cut hole. All industrial CNC Rail Systems are made in house. They ship fully assembled, with the plasma cutter and controller, and tested before shipment.

* The cutting speed chart above includes preliminary data and is subject to change without notice, compare other data carefully. The above stated speeds are the best cut speeds, as is the case with all Thermal Dynamics competitors' cutting speed numbers. Much higher cutting speeds are possible, though edge quality and bevel angle may be compromised. The capabilities shown in this chart were obtained by using new consumables, correct gas and current settings, accurate torch height control and with the torch perpendicular to the workpiece. The operating chart does not list all processes available for the Auto- Cut 100.

Consider your application before choosing a laser cutter. What objects or materials will you cut? Do you only want to use laser cutting? Or do you want to drill and engrave items as well? You will need to consider your specific needs when choosing a laser cutter. Consider the size of your work area and laser specifications such as power, wavelength, repetition rates, as well as the integration and CNC capabilities. After you have established these parameters, you should also consider your budget and compare it with other technology options.

Hypertherm's standard definition Powermax or MAXPRO200 plasmas, or the high-definition HyPerformance and XPR families of plasmas, are all available. Hypertherm's excellent EDGE Connect controllers are also available.

Laser cutting is a precise cutting technology that uses a laser beam to drill, perforate, and depanel different materials. Laser cutters can make precise cuts due to the precision of laser deposition. Laser cutters are the most precise machines available, thanks to their CNC capabilities. Laser cutters produce very smooth edges and can cut various objects without damaging the surrounding material.

The Ultra-Cut 100 offers many benefits for shops and businesses whose quality standards and applications match those of the Ultra-Cut 100. It is easy to use, packed with advanced technology, and reliable for high precision cut. This will increase productivity and profitability.

Victory Rail and Gantry systems include True Hole, which was designed from the ground up to give you the best possible plasma-cut hole. Each of our industrial CNC Rail Systems are built in house and ships complete, with plasma cutter and controller installed and fully tested prior to shipment.

Victory Unitized CNC Plasma System has a worktable. It features a double-frame structural structure with a 3/16'' walled tub. Built on a W4x13 steel frame, it is designed to withstand the harsh industrial environment. It features a smooth, precise guide system with a combination of helical guide rails with a heavy 'T’ design and helical rail rack with 2'’ steel rollers at the rail axis.

The Auto-Cut O2 series systems can be added to any ezRouter CNC plasma machine. This allows for virtually dross-free cutting and high-speed oxygen cutting. Thermal Dynamics also used MaximumLife consumables in the design and construction of this plasma cutting machine. The Auto-Cut CNC plasma cutting systems offer the longest parts life in their category.

The addition of Autocut to your plasma CNC will allow you to achieve economic performance on both mild steels and non-ferrous metals. The power supplies have been designed to be reliable and cost-effective. Auto-Cut's easy-to-use operation is made possible by features like TD’s XT301 consumables parts cartridge and the machine status message central.

Victory Rail CNC plasma has floor-mounted, kneehigh rails. A dual-side steel gantry system supports full sheets (3") of plate, ranging from 5'x10’ to 10'x30’. The dual-side drive system is equipped with all Hypertherm components. This includes the EDGEConnect TC control and your choice of HPR, XPR, True Hole or plasma marking plasmas. These machines can also be fitted over existing cutting boards or bought cutting tables. Victory will send you drawings of the factory for your custom-made work table. Options include 3/4hp CNC, multiple oxy fuel torches with multiple plasma cutters and 12 inch outboard tube cutter. SnapLoc straight -line bevel and off-table trimming are also available. Systems start from $162,070 when you purchase XPR170.

With the addition of Auto-Cut to your plasma CNC you'll have economic performance on mild steel and non-ferrous materials. The power supplies are designed for low cost operation you can always rely on. Thanks to features like TD's XT-301 consumable parts cartridge and machine status message center the Auto-Cut systems are easy to operate.

Self-Centering Components : Precision engineering of torch bodies and consumable parts designed to lock in place for absolute alignment and stay perfectly positioned cut aftercut. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

Victory Rail CNC plasma systems feature floor-mounted, knee high rails, dual side drive steel gantry systems that ride over a downdraft. They can support full sheets of 3' plate from 5' x 10’ to 10’ x 30’. The dual side drive system includes all Hypertherm components including the EDGE Connect TC Controller and your choice between HPR or XPR Plasmas with Autogas, True Hole and plasma engraving. These machines can be used over existing cutting tables and buyer-built cutting tables. Victory will provide drawings to help build buyer-built work tables. There are many options: 3/4hp CNC drilling, multiple oxyfuel torches and multiple plasma cutters. A 12" diameter outboard tube cutter, SnapLoc straight-line vel, and off-table cutting. Systems start at $162,000.70 with XPR170.

The easiest way to get the best results for any task is to match the tool with the project. This same wisdom will help you get further faster if your plasma CNC cutting system selection isn't going to hinder production speed, limit you capabilities, or stop you from growing your business.

Ultra-Cut100 plasma cutting system is perfect for robotic CNC applications. This plasma cutting system can be used to produce high quality products. The Thermal Dynamic Ultra-Cut 100 is the best machine in its class. It can be used as an upgrade to any of ez Router CNC machines.

Unitized systems allow for cutting areas up to 5' x 10ft and 8' x 20ft. Our gantry machines are available in sizes as large as 20' x100'. AutoGas (pipe cutting), oxyfuel cutting drilling, pipe cutting, pipe cutting, drilling, full-contour 5-axis plasma bevel and straightline plasma beam are some of the options.

Victory Rail and Gantry systems come with True Hole. This was created from the ground up in order to provide the highest quality plasma-cut hole. All of our industrial CNC Rail Systems come fully assembled in-house and are shipped complete with a plasma cutter and controller.

Self-Centering Components: Precise engineering of consumable parts and torch body designed so they lock into place for absolute alignment, and remain perfectly positioned cut after cut. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

Laser beams can cause skin irritations or eye damage. Laser systems are equipped with safety features that can mitigate this danger. Fumes generated during laser cutting can pose a danger and must be extracted using a fume extraction unit. The materials being cut will determine the level of toxicity of the fumes.

Victory Unitized CNC Plasma System is a great option for industrial plasma systems that require a complete turnkey solution. This dual side drive system comes with a W4-13-welded frame and a 3/16” plate downdraft or watercut bed. Full sheets of 2” steel plate, all-welded steel Gantry, Yaskawa electric servomotors are supported by full sheets. Available in sizes 5’x10’ through 8’x20’. This system is equipped with the EDGE Connect TC Controller and your choice from any of the Hypertherm liquid cooled plasma power supply options, such as HPR400, MAXPRO200 or XPR170 &300. Systems start at $129,000. ProNest, True Hole 3/4hp drill, an ox torch and SnapLoc straight -line bevel are just a few options.

Quality Cuts on All Metals: The dual gas technology on the XT-301 torch gives a high arc density plasma cutting stream on mild steel, stainless steel, aluminum and other non-ferrous materials.

Victory CNC Plasma Systems is an OEM (original equipment manufacturer) of industrial CNC Plasma Cutting Systems. We proudly make all our CNC Plasma Systems here in the US. And we offer support for every item we sell.

View our video, then explore our gallery of CNC Plasma Cutting Systems, developed to meet the specific needs of customers like you.

No Tools Required! Is it possible to do this faster or more easily? No tools are needed to change consumables.

Laser cutting depends on the laser beam's energy. A laser cutter can be used to cut various materials such as wood, paper, cork, metals and plastics depending on how the laser beam is directed. Not all materials can be cut using any laser cutter. The ability and quality of any laser cutting machine will depend on its output power, wavelength, speed, repetition and frequency.

High Quality Plasma Cutting on All Metals: The dual-gas technology of the XT-301 torch produces a high arc plasma cutting stream on all metals, including mild steel, stainless and aluminum.

There are no tools required! You can't get any easier or faster. It is possible to replace consumables and major parts of the torch head without any tools.

Most laser cutters have integrated CNC capabilities that allow you to program predefined shapes. This technology, combined with precise laser beam steering technology, allows for cutting complex shapes and intricate details.

The Consumables Cartridge only houses consumables, there is no head/torch body that can drive up replacement costs. Simple and quick, a cartridge can be changed by twisting the unique retaining collar threads. This reduces downtime to minutes, so you can switch from one process or one application quickly and efficiently.

The Victory Bridge systems, which are the ultimate in plasma cutting technology, are fully integrated from bottom to top. They include all Hypertherm components, software, and True Hole. Standard features include an integrated torch height control, torch collision protection, laser locator, full motion Hypertherm Phoenix software, and torch collision protection. Bridge Systems are powered by at least three 750-watt, 3-phase servos. Motor sizes will increase with increasing width and length.

We have the best selection of High Definition and Conventional Plasma Tables! Call us at 877-724-77297

No additional charge for on-site training with all our installations. Remote login is available for troubleshooting and training on CNC plasma systems. For technical support, diagnosis, and assistance, our service technicians can be reached via phone and internet. As needed, we offer field service in accordance with warranty.

Which Auto-Cut model do you need to achieve faster and more profitable results? Make sure it's a good fit. Your business's future could depend on it.

As with any other task, the easiest approach that yields the best results is to match the tool to the project. The same wisdom will get you further faster when you make sure your plasma CNC cutting system choice is not going to hamper production speed, limit your capabilities or stand in your way of business growth.

You can get economical performance with your plasma CNC by adding Auto-Cut. These power supplies can be relied on for reliable, low-cost operation. Auto-Cut systems can be operated easily thanks to features such as TD's XT301 consumable parts cartridge or machine status message centre.

Quality cuts on all metals: The dual-gas technology on the XT-301 torch provides a high arc density plasma cutting stream for mild steel, stainless steel and aluminum.

* The above cutting speed chart includes preliminary data. Other data may be available at no additional charge. The speeds shown are the highest, just like all other Thermal Dynamics competitors. However, cutting speeds up to 10 times faster are possible. Edge quality and bevel angle might be compromised. This chart was created using new consumables, current gas settings, accurate torch height controls, and torch perpendicularly to the piece. The Auto-Cut 100 is not covered in the operating chart.

Victory CNC Plasma Systems is an original equipment manufacturer (OEM) of industrial CNC plasma cutting systems. We proudly build all our CNC plasma systems here in the US and we support everything we sell.

The unique Consumables Cartridge houses consumable parts only, no built-in head/torch body to drive replacement costs up. Changing a cartridge is fast and easy – a couple of twists and the unique ‘rapid engagement’ retaining collar threads release the cartridge. Down-time is reduced to minutes and you can change from one process to another or from one application to another quickly and easily.