If you want to obtain a professional look, we recommend you to round over the edges of the wooden pieces, by using a belt sander or a router.
Building a garden bridge is a straight-forward process, provided you use proper plans and materials for your needs. After you have cut the first stringer, you should use it as template for the second component.
If you need a shorter or longer garden bridge, you could adjust the size of the components as to fit your tastes.
In order to get the job done like a professional, you should also build the rest of the components: the handrails, the rail and the post. Smart Tip: Use 2x2s to build the posts, but you should remember that you have to place two of them in the center, as we will show you in the step by step guide. Smart Tip: Drill two pilot holes at both ends of the wooden boards, to avoid splitting the wood. After you have installed the treads, your garden bridge should look similar to the one in the image. Next, you have to build the components of the railings, if you want to add a dramatic effect to your wooden garden bridge.
Connecting the elements of the railings together and attaching them to the bridge are straight forward processes, if you have cut them at the right dimensions. Afterwards, you have to sand the garden bridge with medium-grit sandpaper and apply several coats of varnish to protect it against wood decay and water damage. Smart Tip: Work with great care and attention, making sure you make accurate cuts, align and plumb the components before locking them into position with screws. Thank you for reading our article about garden bridge plans and we recommend you to check out the rest of our projects. Building a nice park bench is a straight forward process, if you use the right plans for your needs and budget. Smart Tip: You need to build several wooden components and to secure them together with different types of screws and bolts. Smart tip: After you have cut the components, we recommend you to smooth their surface and edges with a sand-block.
Enhancing the rigidity of the garden bench is easy, but essential for your woodworking project.
After you have built and secured the components together, you should sand the surface of the bench with medium grit sandpaper and apply several coats of varnish.
Smart tip: Installing a stretcher between bottom cross-braces would add support to the bench.


The measurements for the braces are shorter in the materials list than what you show later in the plans. Even if you don’t have a stream on your backyard, the garden bridge will enhance the rustic look and add value to your property. Work with good judgement and pay attention to all the steps during the construction process, as there are many things that can turn out wrong if not done properly from the very beginning. From our experience, we recommend you to invest in quality materials, such as redwood, pine or cedar.
Next, use a jigsaw to cut the first stringer and use it as template for the second component. As to build the handrails, you should cut them from 2×12 beams, in the same manner as described above. Align the boards at both ends, drill several pilot holes and drive in the screws with a electric screwdriver. In order to get consistent gaps between the treads, just place a regular nail between them and remove it after you insert the nails. As you can easily notice, building an arched bridge is not a complex job, if you use the right materials, tools and techniques for your needs and tastes.
Nevertheless, if you want to keep things simple, you could use the bridge without installing the railings.
Fill the cracks and the gaps with wood putty, let it dry out and finish the surface with a sander. Don’t forget to SHARE and LIKE our articles with your friends, by using the social media widgets. We show you how to build a simple bench by yourself in just one weekend, while keeping the costs under control. Moreover, building an outdoor bench is a cheap project, as it should cost somewhere between 50 – 150 dollars (according to the used materials ). There are many outdoor bench designs to choose from, but in this article we show you how to build a simple bench, at a low cost.
Therefore, use 2×6 wooden boards to build the front leg and the back support, according to our free plans. In order to obtain a rigid and durable structure, we recommend you to cut the braces from 2x4s or 1x4s.
Nevertheless, you can adjust the gaps between the boards, to satisfy your needs and tastes.
As you can easily notice in the image, you need to fit a 2×4 stretcher between the bottom braces of the bench.


If you want to protect it from water damage, you have to freshen up these coats, every few years. The building techniques are straight forward and you also don’t need too much materials to get the job done. After you have completed the project, we recommend you to apply several coats of protective varnish all over the garden bridge, to avoid water damage or wood decay.
If you want to get a steeper curve, you could build the stringers from more components, although it takes longer. Leave about 15” from the end of the boards, to support the weight of the bridge properly. It is a lot cheaper to use pressure-treated lumber, but a cedar bench would have a distinguished look.
Make sure you cut one end of the braces at the same angle with the pitch of the back supports. Before locking them into position, we recommend you to sand their edges with a sand block and to cover them with several coats of wood stain. Draw two parallel lines before drilling the pilot holes, in order to obtain a neat look and consistent results. First of all, you have to measure the size of the back support, to determine the gap between the slats.
When I say the ends should be cut at 75 degrees, you need to make a 15 degree cut to the ends. On the contrary, taking into account the small scale of the project, you can reuse scrap lumber for most of the components and buy the rest from your local diy store. In addition, if you choose an area under a large tree, you will enjoy the summer afternoons a lot more than before. If you want to customize your bench, you could adjust the angle of the back support to fit your needs (75? cut). Regarding the bolts, you can use any type of bolts provided they are long enough to go through all the components and leave exposed enough thread to tighten the nuts. In this step by step article we show you how to cut the stringers, how to make the railings and how to build the garden bridge, along with the rest of the woodworking techniques required to get the complete the project.




Porch Swing And Stand Plans
How To Design And Build Modern Furniture


Comments

  1. Narkaman_Lubvi

    Pieces by routing and sanding them, then measured and prepared every.

    10.06.2014

  2. prince757

    Wooden shop, with the however so as to add that look.

    10.06.2014

  3. Dj_POLINA

    However lots of other individuals use like to level out two specific books by Scott Landis which.

    10.06.2014

top