Configuring the setup information
You can update some of the settings that you configured during the initial DS-Client configuration, re-register the DS-Client with the DS-System, enable the forwarding of encryption keys to the DS-System, forward encryption keys to the DS-System immediately, and request the deletion of forwarded encryption keys.
To configure the setup information:
1. On the Setup menu, click Configuration.
2. Click the Setup tab.
4. To re-register the DS-Client with the DS-System, click Register Now. In the confirmation dialog box, click Yes. A confirmation message indicates if the registration was successful.
NOTE: You must contact your service provider and ask the DS-System administrator to permit DS-Client registration. You only need to register again if you change the hardware or operating system of the DS-Client or if the DS-Client hardware registration is reset on the DS-System side.
5. To forward the encryption keys to the DS-System, select the Enable Encryption keys forwarding to DS-System check box. This allows your service provider to create a valid CRI file with the encrypted keys so they can recreate a working version of the client.
NOTE: If your service provider enforces mandatory safeguarding, DS-Client is not be able to connect to DS-System until you enable this feature.
6. To forward the encryption keys immediately to the DS-System, click Forward Now.
7. To instruct the DS-System to delete the forwarded encryption keys from its database, click Request Deletion.
8. Click OK.