DS-Operator F1 Help for GUI (Context-Sensitive) : DS-Operator Initialization - Connection
 
DS-Operator Initialization - Connection
(Optional – this dialog box can be left empty. If empty, the GUI will scan the local computer and the local computer’s subnet.) Use these settings to indicate a specific address where DS-Operator will look for a DS-System service. This can speed up your login in larger network environments.
 
LAN search time ‘...’
Time (in seconds) DS-Operator will spend scanning the LAN for DS-Systems.
• If you set this value to “0” the GUI will not search the LAN. Only the local DS-System will appear in the DS-System(s) Connection List (if it is running).
Additional DS-Systems
• By default, addresses in this list will be checked using TCP/IP (unless UDP is specified).
Add
Add a new DS-System Address to the search list.
Modify
Modify the selected DS-System entry.
Remove
Remove the selected DS-System entry.
Additional Subnets
Add
Add a new subnet to the search list. This GUI will search for any DS-System on the specified subnet(s).
• Opens the "Add / Modify Subnet" dialog box.
Modify
Modify the selected subnet entry.
Remove
Remove the selected subnet entry.