Configuring a Remote DS-VDR server
You can configure a DS-System to use multiple Remote DS-VDR servers. You must have at least one Remote DS-VDR service running and accessible from the DS-System via TCP/IP on port 4406 (default). If you are using a firewall, port 4406 must be configured to allow TCP/IP connections on both the DS-System and the DS-VDR server.
NOTE: Hyper-V backup sets require a DS-VDR service running on Windows.
To configure a Remote DS-VDR server:
1. On the DS-VDR menu, click Remote DS-VDR Servers. The Remote DS-VDR Servers dialog box appears.
2. Do one of the following:
• To add a Remote DS-VDR server, click Add.
• To modify an existing Remote DS-VDR server, select the server from the list, and then click Modify.
3. In the Add / Modify DS-VDR Server Info dialog box, type the required information, and then click OK.
4. To save the Remote DS-VDR server configuration, click OK or Apply.
NOTE: The Remote DS-VDR service or daemon must be running on the server at the IP address you specify.