Configuring the setup information

Configuring the DS-Client : Configuring the DS-Client settings : Configuring the setup information

You can update some of the settings that you configured during the initial DS-Client configuration, re-register the DS-Client with the DS-System, enable the forwarding of encryption keys to the DS-System, forward encryption keys to the DS-System, and request deletion of forwarded encryption keys.

To configure the setup information:

1. On the Setup menu, click Configuration. The DS-Client Configuration dialog box appears.

2. Click the Setup tab.

F1 Help: "DS-Client Configuration Setup Tab"

3. To modify an existing DS-Client configuration, click Modify. For more information, see “Performing the initial DS-Client configuration”.

4. To register the DS-Client with the DS-System, click Register Now.

a) Contact your service provider and ask the DS-System administrator to permit DS-Client registration.

b) In the confirmation dialog box, click Yes. A confirmation message indicates if registration is successful.

NOTE: You only need to register again if you change the hardware or operating system of the DS-Client, of if the DS-Client hardware registration is reset on the DS-System side.

5. To forward the encryption keys to the DS-System, select the Enable Encryption keys forwarding to DS-System check box. This allows your service provider to create a valid CRI file with the encrypted keys so they can recreate a working version of the client.

NOTE: If your service provider enforces mandatory safeguarding, DS-Client will not be able to connect to DS-System until you enable this feature.

6. To forward or delete the encryption keys, click Forward Now or Request Deletion.

7. Click OK.