Configuring the setup information

Configuring the DS-Client : Configuring the DS-Client settings : Configuring the setup information

You can update the settings that you configured during the initial DS-Client configuration, re-register the DS-Client with the DS-System, enable the forwarding of encryption keys to the DS-System, and resend or delete encryption keys.

If you need to change the DS-Client hardware or install the DS-Client on a new machine, you must re-register your DS-Client. Before doing so, do the following:

• Contact your service provider and ask them to disable the Requires Registration option for your DS-Client on the DS-System.

• Arrange a time with your service provider to perform the re-registration process so that they can open a registration window (approximately 5 minutes).

NOTE: For more information, see “DS-Client to DS‑System Authentication”).

To configure the setup information:

1. On the Setup menu, click Configuration.

F1 Help: "DS-Client Configuration Setup Tab screen"

2. Click the Setup tab.

3. To modify an existing DS-Client configuration, click Modify. See section “Performing the initial DS-Client configuration”.

4. To re-register the DS-Client with a DS-System, click Register Now, and then click Yes to confirm. A message is displayed indicting whether the registration was successful.

5. To forward the encryption keys to the DS-System, select the Allow encryption key forwarding to DS-System check box. This allows your service provider to create a valid CRI file with the encrypted keys so they can recreate a working version of the client.

NOTE: If your service provider enforces mandatory safeguarding, DS-Client will not be able to connect to DS-System until you enable this feature.

6. To forward or delete the encryption keys, click Forward Now or Request Deletion.

7. Click OK.