How To Build A Yew Wood Bow,Smoothing Planes Fine Woodworking,How To Build A Frame For A Porch Swing,Best Wood For Outdoor Fence - How to DIY

07.03.2014
By Jason KnightThe following bow making instructions will help you construct an effective bow in a relatively short amount of time. You can certainly harvest a piece of wood and leave it in your garage for 1, 2, or even 3 years. Once the bark is removed, it is time for the last step before your wood is ready to fully season: reducing the thickness of your bow stave. Loved it, clear and concise to follow and I am totally inspired now to walk into the wood to locate my stave. The Pacific Yew used for the self-backed traditional longbows is harvested in the rainforest of the West Kootenays, B.C.
Some of the best woods for making bows include osage orange, yew, ash, black locust, and hickory, though most hardwoods can work (other examples of hardwoods include oak, maple, and beech).For a quickie bow, you want to start with a relatively straight section of sapling or branch that is free of knots, side branches, and twists. While these do indeed make outstanding bows, they are rare and expensive (yew) or just aren’t found in your area. Now when I say any tree will make a bow, that doesn’t mean you can make a bow out of any tree species on your first go. Part 2 of How to Make a Bow and Arrow will dive into Laying Out Your Bow, Tillering, and Finishing.
You gather a piece of wood from a flexible, dense tree and remove a little wood from the thick end, attach a string, and you are done.
If it is a huge log left in a humid environment, it could still be way too wet to make a great wood bow.
Your goal here is to remove wood on the sides of the bow until it is roughly 2 inches wide.
String the bow; though be careful not to pull back on the string yet (doing so can break the bow). Begin removing wood with a knife from the belly of the limbs where they do not bend while leaving material in the areas of the limbs that bend a lot.
I was wondering if you had any more information, or knew where to get it, about splitting the bow and about following the grain of wood. Note: If you harvested your bow stave in the spring or summer and the sap is flowing, you might be able to simply peel off the outer bark. The other trick to quick-drying wood is to rough out the bow to the floor tillering stage while it is still green. Smooth and silent shooters, the traditional wooden bows handmade by Clark will last a lifetime with the proper care.
You are ready for the next step of bow making instructions once both limbs are no longer stiff and are able to flex evenly throughout their length – thick staves will take lots of carving, while narrow diameter staves may only need very little shaping.
He is Clark Dennill, woodworker, furniture maker extraordinaire, bowyer, woodsman and much more!
He has considered building his own bow for a very long time, so I felt he was in need of a little nudge.
It is very difficult to describe the moment of joy when you first shoot the bow that you have crafted. It was exciting to sculpt the bow from the raw stave watching it slowly take shape each day.
If you are feeling stressed out, and have not spent any quality time with a loved one and could use some beautiful scenery and a excellent cup of coffee, you might try building a yew longbow with Clark Dennill. December 15, 2012 by Dan Corcoran 159 Comments I remember the first time I tried to make a bow and arrow. Since those early days of breaking bows as a kid I’ve spent a little (actually a lot) more time gathering branches, tree limbs, and trees to make a bow and arrow.
It can be, but I will show you the simplest way to make a bow and arrow with the least amount of cost and tools.
The biggest myth in bow-building is this: you have to use osage orange or yew (English or Pacific).


Sometimes checking is not a big deal, other times it will turn your bow stave into kindling.
There are two goals with drying wood: 1) You want it to be about 8-10% moisture content (I’ll explain a super simple way to measure this) and 2) You want it to survive the quick-dry method (you don’t want warping or cracks to appear in your wood). Now that you have narrowed and thinned your bow, it is time to bring it into a location with about 70 degrees and 50% humidity.
Me and my friends play Hunger Games, and I’m looking to build a bow that has enough power to hit someone, but not hurt them. We specialize in traditional bow making and in introducing people to the art of making a wooden bow. Participants are introduced to how to make archery equipment with master bowyer and teacher, Clark Dennill.
The reason it is called a "quickie" bow is because it is made at the time the wood is harvested, rather than waiting a year or more for the wood to season (as is typical for regular bow construction). A 25 to 35 pound draw is sufficient enough for hunting small game while 40 to 60 pounds is needed for larger animals like deer.The poundage can be tested by placing a five foot 2x4 piece of lumber vertically on a bathroom scale, then balancing the bow horizontally by the handhold on top of the piece of lumber and pulling down on the string to a full draw length. Wood loses lots of moisture at this stage and is susceptible to forming small (or sometimes BIG cracks).
I live in Fiji and would like to know which wood is best for making Bows and arrows.i made a bow once n didnt uuse any of the tools u mentioned above to make except a knife! The goal is to reduce the bow’s thickness so that will dry quickly without checking and warping. Tillering is also one of the most important bow making instructions.Observe which limb bends less and carefully remove more materials from the belly of that limb until both limbs bend equally and evenly.
Re-check frequently, pulling down on the string a little bit further each time until you are able to pull it to your draw length (Your draw length can be measured by imagining to hold a bow and pull the string back to your upper jaw to a shooting position – the distance between the handhold and your upper jaw is your draw length).
That said, if you are okay with taking a risk on the piece of wood breaking, then give it a try. Follow my tutorial this time around and shoot for a bow that pulls in the 40lb range at your draw length. Using a straight edge ensures that your bow is straight, which is important in the early stages of making a wooden bow.
Clark left me a little nonplussed when he handed me my chosen billet (top quality slow-grown BC yew) and a hatchet, and suggested 'now let's see what's in there -get to know that stave'. How perfect, then, to learn that there was a skilled bowyer in the heart of British Columbia who could help us both craft a lovely bow from a simple stave.
That didn’t turn out to be a problem at all because Clark demonstrated, and explained, how to use the tools and walked me through building a bow step by step. I learned a lot at the workshop, not only how to make and finish a fantastic bow but also how to make arrows from scratch, make a string, how to use and care for tools, and also I made a lot of great new friends. Some woods really want to check (osage orange, locust, and ocean spray among others), while others are not likely to crack. I have used bamboo as a backing for other woods, but not as a self bow (bow with no backing). If there is one side of the bow that looks like it would be the best for the back of the bow, arrange the wedges accordingly. The process from stave to finished yew bow is demonstrated as well as making arrows spined to match a yew wood bow. Stand the bow stave upright on the ground, hold the top loosely with one hand, and push outward lightly on the middle of the bow. Be sure to never "dry" fire the bow (dry firing is when the string is pulled back and let go without an arrow).
Oh and i have a little problem : I made a bow last time ( from some wikihow tutorial ) and when I tried to shoot it, the arrow went for maybe 2 meters. The best thing to do is measure your draw length and then do the math on how long your bow should be.


At certain times of the year (like late Spring), you can actually peel the bark off the wood like a sticker.
This bow was from a favorite elm of mine, that unfortunately fell- I want to make something special out of it. For anyone who wants to experience the unique pleasure of shooting a bow made by your own hand, Clark's workshop deck has to be one good place to make it. It only follows that we sought to have traditional yew longbows like the original English selfbows.
It is recommended to hand split a bow stave, so that the natural grain of the wood is revealed. If it is a very dense wood like osage orange or yew, then you might get away with making a bow that is that narrow. It would be nice if it was a little larger, but it could be great to practice your bow making skills on. Individual progress on bows is largely determined by the experience the student brings to the process. Now put the bottom tip of the bow on top of your foot and hold the top tip while pushing outward from the belly side of the handhold. Twisted wood can be used to make a bow, but really twisted wood is best used for something other than a bow. Apart from his beautiful bows, each with its own story, his furniture pieces exude craft and almost Oriental attention to detail. Fashioning our own longbows out of nearly priceless staves of yew wood was one of the best experiences of our lives. You can now carve small notches on the both sides of each tip, being careful not to carve into the back of the bow.
When a bow is drawn, the back of the bow is under tension and the belly of the bow is compressed. Your positive support, encouragement and hands-on assistance turned at least one crude tree chopper into a novice bowyer. The experience was worth it just for the tutelage in traditional woodworking with hand tools. Learn more - check out our Wooden Long Bow Workshop!Bow making is also taught as part of the Wilderness Certification Program.
The disadvantage is that the quickie bow may break or crack as it dries out over the months after construction. This is one of the most important bow making instructions.Now find the middle point of the stave and mark out your handhold area by measuring and marking 3 inches out from the center in both directions. It was a relatively intense week of problem solving and bowyering, but sculpting those bows out of the staves of yew was fascinating, fun and very rewarding. December 15, 2012 by Dan Corcoran 152 Comments I remember the first time I tried to make a bow and arrow. Tie loops into both ends of a nylon, sinew, or plant fiber string, using a length that will allow there to be 5 to 6 inches between the string and the handhold when the bow is strung. We left Nakusp with two very beautiful high performance bows and a profound appreciation of Clark's ability as a bowyer and woodworker. Self backed yew longbows have been used for centuries, often out performing other bows for strength, durability, and beauty. Regardless, a quickie bow can often become an effective long-term bow by caring for it as it dries out over the course of a few months.



Box Shelf Design
Fine woodworking build your first workbench
Wooden Swim Raft Plans


Comments to “How To Build A Yew Wood Bow”

  1. RAMIL writes:
    You're going place the shed heating programs it's possible you'll need.
  2. VoR_KeSLe writes:
    Typically be extra of a task than a way of life.
  3. VETERAN writes:
    With homeowners looking to match them to the d?©cor technique to neatly conceal storage storage.
  4. AlyoskA_LovE writes:
    The power of your chosen material, whereas.