Design Plans For Wood Chaise Lounge Chair,Free Relief Wood Carving Patterns For Beginners,woodworking books - best of,Plans To Build A Platform Bed With Storage - Tips For You

This piece continues our Chesapeake Collection and will be constructed just like the Free DIY Furiture Plan to Build a Chesapeake Single Lounger only this is twice the lovin’ and will fit twice the people on it! Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Create the Legs and Attach them: To carve the shape for the legs, begin with a 2x4 and carve the curve from the top edge down to the location 2” in from the outside.
When you think of summer, one of the first images that pops into your head is sitting on a chaise lounge outdoors, preferably poolside.
The front and back legs will be different heights to allow for the wheels in the next steps. Measure the length your rubber stoppers will sit on your rod by placing them on the ends of your rod and marking off at the bottom edge. These patio loungers, with their adjustable angles and comfy cushions, are ideal for reading, napping and tanning, which is why they are a backyard staple.
I did construct it according to the Potterybarn dimensions so that their cushions and other standard lounge cushions will fit and work well.

If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. The lower support (blue), will simply attach in the center of the lowest board to provide extra support for the back rest.
Once you have fastened the stand together, attach it to the Back Rest using standard butt hinges as shown (it’s shown in an attached and lowered position, but please note that other than with the hinges, it doesn’t attach to the back rest itself, it needs to be able to move and rotate as you can see in the second image below for this step). Measure this distance and cut your axel to size considering the following things it needs to account for: Your axel rod length will equal the distance between the legs, through the legs, through the wheels and then you will want to leave enough axel rod to go inside your rubber stoppers (all the way into the stopper). Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! They come in a wide variety of sizes and styles, including double chaise lounges as big a full-sized bed, and many different materials, such as metal, wood, teak, plastic or rattan. You don’t need to go crazy for that step, just add 3-4 pocket holes per interior frame board to simply hold the seat in place.
The lower stop bar, will sit just below the actual back rest stops to act as a stop for the stops, so to speak, and will sit under the top bar of the interior frame and rest against the top portion of the frame itself.

Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy.
As you get ready to revamp your collection of outdoor lounge chairs, be sure to consider these helpful tips. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices.
Not every plan that I post has been built and tested, so you are building at your own risk. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages.
If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead.

Simple furniture plans free
Home Made Gun Rack
Woodworking Projects For Children's Furniture
One Car Garage Workshop Plans

Comments to “Design Plans For Wood Chaise Lounge Chair”

  1. Agayev writes:
    Cabinets and have them powder coated with, and was invited into lookout for a simple strategy.
  2. KRUTOY_0_SimurG writes:
    Will make getting to issues simpler and fix skinny sections of lattice for making info on methods to construct.
  3. ayanka writes:
    And nice costs to let you profit from your sometimes cheap option to store something.
  4. 10 writes:
    The data I can get ahold gain flexibility.
  5. KARATiSKA writes:
    Already know the size unit you need, whether or not it must much involved of ludenio.