How to install a hunter ceiling fan with light kit diy,discovery brushed nickel ceiling fan youtube,gazebo light with fan online - Good Point

For rooms measuring 76 to 144 square feet, choose a fan with a blade diameter of 36 to 42 inches.
For rooms that are 225 to 400 square feet, use a fan with a blade diameter of 50 to 54 inches. When installed, the fan blade tips should be at least 30 inches from the walls and other obstructions. Turn off power to the existing fan or light at the main fuse or circuit box and use a circuit tester to verify the power is off. CautionIf you plan to control your fan with a wall switch, make sure you have the right switch.
Good to KnowIf your electrical box has wiring for separate fan and light switches but you aren't installing a light with your fan, trim off the bare portions of the wires for the light. If you're installing a new electrical box, fasten it to a ceiling joist or a 2 x 4 wood brace between two ceiling joists. Good to KnowInstallation on angled ceilings may require a separate downrod and an angled mounting kit.
For a fan with a downrod, thread the wires through the canopy trim ring (if applicable), canopy and downrod. For a flush-mount fan, thread the wires from the fan motor through the top housing, trim ring (if applicable) and canopy. For a downrod installation, insert the downrod into the collar yoke on the fan motor and secure it to the motor assembly as the manufacturer instructs. For a flush-mount installation, attach the top housing, trim ring (if applicable) and canopy to the fan motor assembly.
Fans that work in either downrod or flush-mount applications may need additional adjustment to convert them for a flush-mount installation. CautionUse pliers, a wrench or a screwdriver to secure the fasteners that hold the downrod to the collar yoke. If there is no hook or downrod, have a helper support the fan while you follow the steps below. Good to KnowSome fans come with a support cable that wraps around and fastens to the brace in the ceiling that supports the electrical box.


Use wire connectors to join the wires according to the fan manufacturer's instructions. Good to KnowSecure the wire connectors with electrical tape to prevent them from vibrating loose during operation.
Tuck the wires into the electrical box, keeping the green wires and white wires on one side of the box and the black wires on the other side. Good to KnowIf your fan includes a light kit or if the installation site has separate wiring for a light switch, you will have additional wiring. Good to KnowSome fan kits include grommets you need to install in the blade mounting holes before attaching the blades to the brackets.
Remove the switch housing cover plate from the fan and remove the plug from the center of the plate.
Feed the light kit wires from the light kit through the hole in the cover plate, and screw the plate tightly to the light kit to prevent it from vibrating loose. Good to KnowIf you use wire connectors rather than plug-in connections, secure the wire connectors with electrical tape to prevent them from vibrating loose during operation.
I just bought a new ceiling fan and will be mounting it in a place where there is currently no fixture. The wires running out of the right side of the junction box go to the outlet on the other side of the room. The black and black with stripe at the light are for the fan and light to be individually controlled. I also want to add that you will not likely get enough slack in the wire that goes across the ceiling to make a splice.
Back to the switch of concern: I can't tell whether the outlet or switch is the feed from the panel. In note 3 of the switch info, it says, "This control requires separate wiring for the ceiling fan and fan light kit.
I am looking through the fan assembly directions to see if they specify with more clarity the wires that come out of it and attach to my junction box. Keep an eye out for fans with the ENERGY STAR® logo, and enjoy even more energy savings.


If there isn't a suitable joist or brace available, but you have access to the framing through the attic, add a brace that can support the fan. If your electrical box is a thin, pancake-style box, separate and tuck the wires into the fan canopy. Connect them to the wires from the light kit according to the fan manufacturer's instructions. Depending on your light kit, you may need to attach light shades before installing the bulbs. As shown in my initial post, the blue switch wire is for the fan and the red switch wire is for the light.
Once you select a fan, check the included documentation for any additional requirements for blade clearance or ceiling height. Don't use the fan with any solid-state speed-control device, dimmer or variable-speed switch unless it's specifically designed for use with a ceiling fan.
Except for the bare or green ground wire, no bare wire or wire filaments should be visible outside of the wire connector after connecting the wires. Some manufacturers simplify the electrical connections between the fan and light kit with plug-in connections. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted. Contact a licensed electrician if you have any doubts or questions about the connections, or if your home's wiring doesn't appear compatible with the changes you're making. If you have doubts about the suitability of the existing box, purchase and install a new one. Make sure it's acceptable for ceiling fan installation and will support the weight of the fan.



Small table fan malaysia
Ceiling fan motor does not work kjv
Low profile ceiling fans with led lights india
09.04.2015 admin



Comments to «How to install a hunter ceiling fan with light kit diy»

  1. Beckham writes:
    Not blow down directly on your food.
  2. S_k_E_l_i_T_o_N writes:
    Noise (or an irritating whirr) quantity.