Edit VRA Dialog
To change the network settings for a VRA, for example when the gateway to the VRA is changed.
■ Host: The IP of the host on which the VRA is installed.
■ Host Root Password: The password required by the VRA to access the host.
■ VRA Group: The free text to identify the group to which a VRA belongs. If you create a group and then change the name when editing the VRA so that there is no VRA in the site that belongs to the originally specified group, the group is automatically deleted from the system.
To create a new group, enter the new group name over the text New group and click CREATE.
■ Configuration: Either have the IP address allocated via a static IP address or a DHCP server. If the VRA was originally installed with a static IP, you cannot change this to DHCP. If the VRA was originally installed to use a DHCP server, you can change this to use a static IP. Zerto always recommends using a static IP.
■ Address: The static IP address for the VRA to communicate with the Zerto Virtual Manager.
■ Subnet Mask: The subnet mask for the network. The default value is 255.255.255.0.
■ Default Gateway: The default gateway for the network.
