How To Build Wine Racks Wood,Pa Game Commission Birdhouse Plans,basic woodworking projects - How to DIY

Whether you are a true wine aficionado with a collection worth hundreds of dollars or are simply a person who enjoys an occasional glass of wine with dinner, the storage of your wines is of critical importance.
Of all the types of materials used to build wine racks--wrought iron, stone, concrete, plastic, wood and a variety of other options--wood is easily the most popular material. The most popular species of commercially available wood that used in the construction of wine racks are as follows: pine, cedar, spruce, fir, hemlock, oak, and a variety of other American hardwoods like cherry or maple. I was perplexed however that in the few years since this post was published you have never addressed anyone’s requests for your hanging methodology. To protect your investment and to keep your wine tasting as it should, it should be stored under the correct conditions (50 to 65 degrees) and at the proper angle in order to prevent seepage from a dried out cork. Wooden wine racks have been built since the very beginning of wine making and wine storage because of its many advantages. Claire here, and you might recall two weeks ago when I asked for your opinions on which wine rack design I should create.
And so eco-friendly to reclaim an old piece of wood and transform into something so useful!


Many of us are wondering how the rack is attached to the wall, since, no doubt, its minimalistic look is enhanced by its floating on the wall. Some of those advantages include: wood is easy to form, easy to assemble, relatively light weight for the strength that is needed, wood can be made to match any decor (with stain or paint), wood is very durable, it is available in many different species, it is a renewable resource, and it is readily available to the amateur woodworker. When choosing the type of wood you plan to use, it is important to consider a few elemental facts.
In many cases, there will be a stamp on the wood that reads "S-Dry," which means that it has been dried down to a moisture content of 19 percent. Well it certainly wasn’t an easy decision, but after much deliberation I set out to replicate wine rack #3 (and used a patterned, natural piece of wood for added interest). I’m amongst the crowd that will highly appreciate a detailed explanation on hanging this superb rack onto the wall.
The major disadvantage of a wood wine rack is the fact that it is not fireproof, but that can be corrected by treating the wood with a fire retardant. Do not use woods which have wide spaces between growth rings, since trees which have grown quickly may be great for house framing material, they are not ideal for use in wine racks.


The lower the moisture content, the less likely the wood will warp when it undergoes the process of equalizing with the humidity level of your home environment. Your local lumberyard will have a moisture tester, which you can use to test the actual moisture content of your wood.
Therefore, if you were to build a wine rack to hold 1,500 bottles, the contents of the rack would weigh approximately 4,500 pounds.
In addition to the weight of the bottles, you also need to add the weight of the rack itself.
A good estimate is that a wine rack will add half a pound for each bottle that is stored or roughly 17% of the weight of the wine. Check to make sure that your floor joists are in good shape, add additional bracing, or build your wine rack on the concrete floor of your basement for added safety.



Make Lap Desk
Woodwork Tool Storage
Custom woodworking san diego