02 Dec. 1975|
Woodworking table top fasteners,outdoor playhouse building plans free,wooden rail - Within Minutes
The power tools you need to build this display cabinet include a tablesaw, jointer, planer, bandsaw (or jigsaw), and a router table and router. Before installing the bottom (V), glue the support boards (T) to the top of the lower box frame (Detail 1, below). American Woodworker magazine was acquired by F+W Media (parent company of Popular Woodworking) in 2014.
Set the lower box frame flush with the bottom of the bottom side rails (Photo 10) and the upper box frame flush with the top of the top side rails (F, Fig.
I used a dado blade in the tablesaw for this cut because it’s quick and produces a better cut than a straight bit in the router table.
If you discover some twist in the frame, loosen the clamp at that corner and raise or lower the corner until the tops of the winding sticks are perfectly parallel.
Simple plastic spring clips (see Sources, below) hold the wires against the inside of the top.
The groove is quick to make on your router table, and the tongue can be cut with a dado head on your tablesaw. If you’ve closely followed the sizes in the Cutting List, your doors should fit snug at the top and bottom.
You could use your dado blade for this, but I prefer the slot cutter in a router table because it produces more reliable results.
This is intentional; the snug fit allows you to trim the top and bottom of each door to produce nice, even gaps (Photo 20).