15 Mar. 1983|
Wood wagon wheel plans,homemade carport designs,beech wood lumber for sale,mid century modern furniture stores seattle - Reviews
This article will explain how to make a replica wagon wheel using scrap lumber and fairly simple construction techniques.
Prepare a work table or other flat surface large enough to lay out a full sized wagon wheel on. Mark the center point of your work surface, then use this as an anchor point to scribe a line giving you the circumference of your wheel.
Build a hub for the wheel by cutting boards large enough for the diameter you desire, and center it over your original center point on your work surface.
Use a jigsaw or bandsaw to cut these circles, giving the hub and wheel rim their final round shape. Place the rim and hub back in their centered positions and rotate them one half the length of one segment.
Sand down any rough edges, trim spokes (dowels) flush with the outside diameter of the rim, and finish the wheel as you desire. This project can be built using scrap wood, since the longest lumber you need for a 36 inch (91cm) diameter wheel is less than 15 inches (38cm), and old recycled broom handles or other tool handles can be used for spokes, rather than buying dowels. Just be aware that this wheel is useful for display purposes only, and is not designed for using on an actual wagon. For a 36 inch (91cm) diameter wheel, you will need about 40 inches (101cm) of width and length. For a 36 inch (91cm) diameter wheel, you will find this length to be about 13 inches (33cm). When you are satisfied the cuts fit, and the overall shape is as desired, fasten each board together either with biscuits, or with wood glue and countersunk wood screws.
This will be the position you will mark the spokes at, and they should be centered between the joints in the rim of your wheel.
Making sure these are in line will help keep the spokes straight when the wheel is assembled.
You can cut them a little longer than necessary and trim them after the wheel is assembled. He appreciates that wikiHow is a great place to connect and collaborate with others, and overall have fun while doing it.