13 Jul. 1979|
Wood covered cooler plans,child sized furniture plans,woodworking plans clothes drying rack,woodsmith dovetail jig plans - Test Out
I used a 50 quart Igloo cooler for this project and dry fit the slats to see how many I’d need to cut.
Now measure the height of the cooler and figure out how many slats you need – in my case it was 6 slats for each side for a total of 12 slats.
You’ll want enough slats to cover the entire height of the cooler plus an extra 4 to 5 inches.
Apply wood glue to the legs, position the slats between the legs, pre-drill two holes on each side of the slats, and screw the slats to the legs. Cut one front slat to size and dry fit it between the two sides to check the cooler will fit. This is a great project for Father’s Day – and perfect for a novice woodworker! I’m also keen to have a go at the cool cooler – maybe the landscapers fitting the pool next door may have some spare pallets for me!
Measure the width, height and depth of your cooler, and determine the height you want it to be.
We’ve thought about it, but are holding off on final details until after we move into our new place.
Well, most coolers come with an attachment built in, so we just applied a little teflon tape around the spigot and coupling for traction, and screwed it on in there.
Invest in the best materials you afford, especially if you want to use the cooler for many years in a row. Top Tip: Building a nice wooden cooler is a complex project, but the end result will most certainly enhance the look of your backyard. Top Tip: Plumb the wooden legs with a spirit level and check if the corners are right-angled, before locking the component together. Continue the woodworking project by fitting the slats to the bottom shelf and to the floor of the wooden cooler.
It is essential to place the slats equally-spaced before driving the screws into the framing. The next step of the woodworking project is to attach the 1×4 slats to the four sides of the cooler.
If you want to enhance the look of the wooden cooler, we recommend you to attach 1×2 trims to the exterior of the project. Don’t forget to add nice trims to the top of the cooler before attaching the lid into place.
One of the last steps of the project is to build the lid and to secure it to the wooden cooler.
After installing the top lid to the cooler, we recommend you to take care of the finishing details. We're going to guess that you or someone in your family has a cooler that looks like this hanging around their home. Have no fear — you can still use that beat-up old cooler; it just needs a bit of a makeover. The key is to start with a stand that fits the cooler, and then cover the area around the cooler with reclaimed wood or even wood shingles. Check out Brooke's blog for the complete step-by-step instructions for transforming your own cooler. This is a small aesthetic preference but will affect the look of the cooler once it’s finished.
Add wood glue, pre-drill two holes on each side of the slats and screw them to the legs just like you did with the sides. You need to add trim to the very top of the cooler, to hide the rim where the cooler meets the wood.
A rather simple tutorial on how to create your very own affordable rustic cooler from recycled materials.
Nevertheless, the most important aspect of the project is to take accurate measurements and to adjust the size of the cooler to suit your needs. As you can easily notice in the plans, you have to adjust the width of one slat on each side, otherwise it won’t fit into place. Cut the components to the right size and lock them into place with finishing nails and waterproof glue.
If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. Not only did Brooke cover up the dingy green outside, but she also added a stand so the cooler was easier to access.
Be sure to leave a hole for the drainage spout on your cooler; that way you won't have to take it out of the stand to let all the melted ice drain away. Cut those slats to size and attach them to the cooler frame like you did in the previous step. Therefore, don’t forget to adjust the size and the look of the cooler stand to fit the plastic container. The Husbane also plans to attach an antler shed to the top as a handle, but didn’t have time to finish it before he had to go work out of town.
So, if your cooler is 15 inches tall, place the lower support at 16.5 inches below the top.
I really love a lot of the rustic decor you can get at places like Tractor Supply and Hobby Lobby. Build a similar cooler with storage underneath and shelves elevated above the lid and use the lid as a work surface.