02 Dec. 1987|
Types of wood floor varnish,wooden dvd racks and stands,ebony fretboard wood filler,victorian gingerbread trim ontario - Reviews
The professional at Step Flooring will be able to guide you through the options available from light ash stains to high gloss dark polishes.
Whether you require a new finish for your restaurant or shop floor, or a solution more tailored to domestics needs, we can select the solution most suitable for your project. The major difference between lacquer and oil is that lacquer forms a tough seal over the wooden floors, whereas the oil penetrates the pores of the grain and needs re-application. Floors with heavy traffic will need to be re-oiled 2-3 times a year, whereas in domestic homes every second year should suffice. The professional way to stain a floor is to sand first leaving your floor silky and smooth then use a stain or even several stains mixed together and diluted.
Which means that you can walk on the floor after 4 hours of the treatment, but you should avoid getting your wood floor wet until it has has fully cured. Matte varnish finishIn the picture on the right you can see a floor varnished with 3 coats (1 primer coat and 2 varnish coats). These finish types are more common in commercial settings and can be seen everyday on basketball floors and gymnasiums.
If you choose to lacquer the wooden floor, the advantage is that this should not have to be re-applied. As a general rule, there is little gain in oiling soft woods (such as pine boards), leaving it better suited to hardwood floors.
Dirt and grit are the biggest enemies when it comes to scratching or scouring the floor finish. The floor is then varnished with a clear professional varnish, at least 3 coats applied after the stain has been left over night to dry.