24 Dec. 1979|
Titebond wood glue dry time,exotic hardwood dowels,balsa wood model airplane template - Test Out
Comparatively, the Gorilla Glue has a shorter clamping time, only needing 20 or so minutes for the initial set (Titebond recommends about 30 minutes).
To test out the strength of the Gorilla, we glued a few boards together, clamped them and a day later (Gorilla says 24 hours to full strength), we wailed on them with a hammer, trying to break them at the joint. After using the Gorilla Wood Glue and seeing how it performed in our barbaric tests, we became pretty confident of its abilities and if we see it at a store, we're probably get some more. I was formerly an Elmer's wood glue fan, but I built a pedal plane a few years back and the original polyurethane-base Gorilla Glue was suggested to be used at the local hardware store based on it's sheer strength, and I've never used any other products since. I've never tried Titebond products, and quite frankly I haven't any reason to at this point. I use Elmers Carpenters glue,easy set up, easy clean up, mostly white for tricky old furniture repairs and yellow for new work. I have noticed differing viscosities between the brands, with Titebond being the least viscous and Elmers being the most.
The original gorilla glue is some serious stuff - water activated foam expanding poly glue.
This didn't have too much of an effect on us, but once or twice our work flow demanded that we unclamp at around the 20 minute mark and it was nice to know that we were within the limits of the glue. In the photograph below (click to enlarge), you can see a bead of the dried Gorilla compared to a line of Titebond II and Titebond III. I tried the original gorilla glue and it definitely had a bit of a learning curve, not a fan.
Premium Wood Glue offers ANSI-Type II water-resistance and is FDA approved for indirect food contact, and is also ideal for radio frequency gluing systems. Even though you're not supposed to see any glue after a nice glue-up, if there's a little peeking through, it's a little more camouflage with the Gorilla.
Like a weld, if a glue joint is done correctly, it should be the strongest part of the glue-up.
I use this information to my advantage when I'm putting together loose or tight joints, knowing with Titebond I can put a really thin coat down and not have to worry about much squeeze out. That Titebond glue line in the test photo looks like it may be the dark version of their wood glue, which is meant for use on dark woods like walnut.
The glue is ideal for fixing outdoor furniture, mailboxes, birdhouses, planters and more with its strong initial tack, fast set time and superior strength. Gorilla, seeking to change our minds sent us a couple bottles of their Gorilla Wood Glue to test out.
Titebond III Ultimate Waterproof Wood Glue offers advanced bond strength, long open assembly time and. I custom build all kinds of wood projects for clients and stores and use Titebond III for its quick dry time and strength.