04 Nov. 2006|
Powdered wood putty,woodworking kits for tweens,how to make wood aquarium - Reviews
The Facts on Fillers - Old House JournalIt's easy to make your own filler with fine sawdust from the same wood as your .
Different Types of Wood Filler and Wood PuttyThis article is going to explain the different types of wood putty so when you want to . Famowood Wood Filler - GlazeCoat High Build Epoxy CoatingFamowood® Professional Wood Filler is the best wood filler for any type of wood. Marine Epoxy Putty l Epoxy Repairs l Underwater EpoxyPC-Marine putty epoxy from Stairwarehouse is the answer to quick and easy . One advantage of filling after staining or sealing is that you can add color to the filler to get a good match to the surrounding wood.
If your wood is just stained at this point, then you can try to sand those light areas to open up the wood pores and then restain those. Stain Putty is the brand name of a filler powder that is mixed with the same stain used on the project to make a paste that is then used to fill holes. I only have stained the moldings so far so I guess I will have to sand these areas down to bare wood again,restain the areas and the mix the filler with stain and apply where needed. I am trying to avoid sanding the entire door frame and windows back down and starting all over with fresh wood.
After staining the door and noticing the wood filler not accepting the stain, I dabbed on a second layer of stain after the rest of the stained door had dried with a little artist's paint brush - and I didn't wipe it off. I also found the little artist's paintbrush handy to get stain in some of the wood recesses of my doors especially the corners - I used a kind of dabbing technique with the bristles. Another way to hide nail holes is to take a gouge and slice out a sliver of wood, set the nail deep in the gouged hole, and then glue the sliver back in.
Another tip, if your going to paint woodwork that you've used a finish nailer and want to fill those tiny holes just use the grey exterior window putty, the type used for the old sash windows you can use your thumb to apply. Dev96792Sorry kinda late but when ever your staining before you even start staining taking in that you have also done all the normal wood prep, its always best to wet your wood with water no matter what type off base of stain your using, allow water to dry, this is also a way to check your wood for imperfections such as scratches, glue, or any piece that will not accept stain. Compatible with wood and fiberglass, and makes a great filleting compound with excellent adhesive properties.
All the different wood fillers I use in my floor work almost never stain the same as the wood itself. Well, just so you don't feel too bad, your problem is one that has been a frustration of even experienced woodworkers for ages. One idea I heard was to gather sawdust from the same type of wood and mix it with glue to fill the hole, assuming it would stain the same as the wood.
I sanded the areas that didn't stain back down to bare wood, stained & blended the stain into the remaining area and it looks pretty good. Now the wood filled portions have taken the stain a bit better and those parts are much less noticeable.
Before I put the stain on, I sanded all the wood and then applied the same Minwax Stainable Wood Filler to holes, cracks and uneven spots that sanding would not get. This is to open the pores of the wood, without buying or purchasing or spend any more money than you need to. I used PL professional wood filler in a little can, Minwax water based wood conditioner before staining and then Minwax water based stain on the doors.
Woodworking magazines and books keep coming up (or try to come up) with techniques that will make filling those holes invisible.