03 Nov. 1986|
Make wood bowl without lathe,brazilian cherry wood filler,mini wood lathe uk,murphy bed diy instructions - Test Out
Turning a 10" or 12" bowl from a reasonable well balanced bowl blank goes well, however, when turning a large out-of-balance bowl blank the lathe vibrates, actually, more of a twisting action of the main post. The lathe works even better that my expectations, it's bolted to the floor and is very solid. After several months using the lathe and always looking for the wrench when I need to adjust the banjo ("now where is that wrench, must be somewhere under this two or three inches of wood shavings") I decided to upgrade the banjo.
The master maker of weird wood working tools, [Izzy], decided to make a wooden bowl without the use of a lathe. Yeah, no, I have to concur on this with experience in the wood shop, jig or no jig this is incredibly dangerous. Using tools as intended to hack things without hurting or killing yourself seems quite Hack-a-Day-ish.
With a couple chisels and a little leg strength (and years of practice) you can out preform a high end lathe. Anyone considering getting into turning should consider a pole lathe for their first few attempts. I have already replaced this bolt with a new bolt with a handle in the bolt head, this makes it much faster to adjust the tool rest. A chunk of wood would be bolted to the head stock and the bottom of the bowl turned to an appropriate shape. He created a unique fixture to cut the shape of the bowl on a table saw, a piece of equipment that is a bit more common for the average DIYer to have. This time to cut the inside of the bowl, the fixture is locked in the vertical position and the wood is dropped straight down on the spinning blade while being rotated.
Then the half-bowl-shaped wood is flipped around on the lathe so that the material on the inside of the bowl can be removed. The fixture itself is made of wood and supports a standard hand drill in a vertical position. The table saw is turned on and the fixture allows the work piece to rock back and forth creating the bowls outside shape.