05 Feb. 1978|
Diy storage sheds free plans,wood carpentry joints,wooden plant hangers,model boat building plans free - Test Out
Cut two pattern rafters, following the RAFTER TEMPLATE as shown in the storage shed diagram.
Draw the rafter layout onto the top plates and ridge board, using 16″ on-center spacing. Facenail each tie end to the rafter with three 10d nails, then toenail each tie end to the top wall plate with two 8d nails.5.
If desired, install roof vents.Install the plywood roof sheathing after installing the fascia. Butt the top edges of the siding against the soffits according to the storage shed diagram (8 x 12 shed plans). Install the hinges and hang the door, using shims to set the gaps at the bottom and top of each door of the shed.8.
Determine the best slope for the ramp using boards or plywood set on the ground and the shed floor.