01 Jun. 1978|
Denatured alcohol wood stain,buy barrister bookcase hardware,make your own workbench plans,woodworking sawdust collector - Review
So as we thought about doing the guest room over I also thought about the wood trim in here. Put rubber gloves on to protect your hands from the stain and place drop cloths on the floor to protect it from drips. Before you begin, test the stain on a scrap trim board or a hidden area of the trim to make sure it is the color you want. You may need to seal the wood with a "stain controller" before staining to make the stain a more even color if you are using softwoods, such as maple, cherry, poplar, birch or pine.
So I talked to my friends at General Finishes because I thought their Oil Based Gel Stains might be a good way to get the look I wanted without having to strip the wood completely!
If necessary, sand the rest of the wood, as well, using 100 to 120 grit for rough areas and a fine 220 grit to make the wood smooth. Go against the grain, working the stain into the wood, and then wipe the wood again along the grain to make the color even. You may want to experiment with the length of time you let the stain set and the amount of coats you use.