Enjoy folks – these are truely some ingenious alternatives to buying your own sander.
To use the table, install the applicable hardboard insert, and position the table so that the sanding drum is centered with the hole in the insert. If you like this project, please check out more than 1,000 shop-proven paper and downloadable woodworking project plans in the WOOD Store. Use a circle cutter to make slightly oversized wood plugs for the top and bottom of the spindle.

If you like this project, please check out our 330+ paper and downloadable woodworking project plans at the WOOD Store. Clamp the table in place, and adjust the drill-press table, if necessary, to square the sanding surface with the drill-press spindle. Also, you enjoy woodworking projects that don’t involve making something to justify your time in the shop.
Square the corners with a chisel, or leave them round and sand the corners of the inserts to fit the opening.

Be sure that you fully countersink the PVC for the wood screws that secure the plugs so the heads don t protrude and scratch your work. Trim the sandpaper so the ends just meet or have a slight gap overlapping the paper would make a bump.

How to make log furniture bench
Hand made tool boxes
Building plans for shed
admin, 03.05.2013.
category: Crown Molding Cuts.

  • GemliGiz, 03.05.2013 at 21:58:34

    When you complete this project you will own most casual hobbyists, but for the.
  • BEDBIN, 03.05.2013 at 12:20:33

    Design,shelf reliance food storage that requires no tools and makes.