What should I do if mydlink keeps asking me to download the mydlink services plug-in but I have installed? The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. Warning: Please do NOT upgrade firmware through wireless unless the device only has wireless connection. Votre signalement a ete transmis aux moderateurs et sera traite dans les plus brefs delais.
Des que votre avis sera publie (dans 4 jours maximum), vous aurez la possibilite de le desactiver depuis votre compte client et d'en deposer un nouveau.
Remote Backups allows you to back up your device to another ShareCenter Pulse or Linux Server or vice versa from a remote ShareCenter Pulse or Linux Server to your D-Link DNS-320 device.
Note: If you are going to backup from this NAS through the internet as the source content of the backup setting, then make sure that the Remote Backup Server is checked and set with a password.
Check this box to enable the remote backup server functionality to that a remote NAS or Linux. Note: If you are not using the Remote Backup functionality leave this box unchecked so that your device performance will not be affected by the additional overhead used by this process. Modify: Click to make changes to your existing Remote Backup jobs in the Remote Backup list.
Delete: To remove a Remote Backup job select the job in the list and then click the Delete button.
When you click the Create Button above the Remote Backup list this wizard will launch allowing you to configure a new Remote Backup job. Local to Remote: Sets the backup source as the local NAS and the target destination for the backup files as the remote NAS or Linux file system.
Remote To Local: Sets the backup source as the remote NAS or Linux file system and the target destination for the backup files as the local NAS.
Folder Path: Select a local network share folder or file as the target or source for the backup job.
Remote IP: The backup process uses Rsync protocol and needs to know the IP address of the destination source or target device for the backup. Enable Encryption: Checking this box will enable SSH encryption of the files that are transferred (backed up) over the network between the local and remote devices.
Ignore existing file(s): Checking this box prevents the backup process from writing over any files in the target file system that are not part of the backup files or folders. Incremental backup support Num (#): Checking this box provides multiple backup-capability at scheduled times.
Remote Path: Using the drop-down menu, select the file system (folder) path to the remote target or source system for backup. Manual: Check either Yes or No selection below to start the backup (yes) immediately on completion of the wizard or (no) manually start the backup from the Remote Backup list. Once – Select this option to run the Remote Backup once at a specific date and time set. Scheduled: Select this option to set the backup to occur daily, weekly, or monthly per a specific schedule.


The DNS-320 supports on option where the user can enter a USB storage medium in to the USB port and with a click of a button automatically copy the contents of the USB storage medium into a folder on the D-Link DNS-320 device. To check whether the USB storage device is connected successfully, the user can navigate to the System Info menu of the System Status icon in the Management Tab of the Web GUI of the device and view the USB Information section. Note: It is a very good practice to un-mount an USB storage device before removing it from a USB port. The D-Link DNS-320 Network Storage USB Print Server features a built-in USB print server, giving users the ability to share a printer on their local network.
Select the printer driver from the installed Manufacturer list or use the Have Disk button to browse for the printer driver file. 3.Once you have selected the proper driver as shown in the browse list then click OK to install the printer.
Displays the workgroup, name, description, current temperature, packet counts, and system uptime. Displays the hard drive information, including the disk mode, total size, used and remaining drive space. The LAN Settings allows you to enable LLTD and to configure the Link Speed and the IP address as a DHCP client or Static IP.
DHCP Client:Selecting DHCP Client will cause the DNS-320 to obtain an IP address from the local DHCP server. Static IP: Selecting Static IP requires you to assign the IP information for the DNS-320 manually. Link Speed: Select either Auto (Auto-Negotiate), 100 Mbps, or 1000 Mbps by clicking the appropriate radio button. LLTD: The device supports LLTD (Link Layer Topology Discovery) and is used by the Network Map application that is included in Windows Vista® and Windows® 7. Server Address: Select a DDNS Server from the combo box on the right hand-side, or type in the server address manually. Disclaimer: Drives that have been tested and approved by D-Link will be flagged with an asterisk (*). Remove the top cover of your device by pressing the push button in and then lift the cover up. Plug an Ethernet cable to the Ethernet port on the back of the device and plug the other end to your network via a router or switch, or directly to a computer for configuration. Connect the power adapter to the device and then connect the other end into a power outlet or surge protector. Note: The computer used to access the ShareCenter® web-based configuration manager must be on the same subnet as the ShareCenter®. If your network is using a DHCP server and the computer receives IP settings from the DHCP server, the ShareCenter® will automatically be in the same subnet.
Select System Administrator and click the Login button (leave the password blank by default). The Setup Wizard on the CD-ROM will give you step-by-step instructions how to connect, install, and configure your D-Link DNS-320L. The Setup Wizard on the CD-ROM will give you step-by-step instructions how to connect, install, and configure your DNS-320L.


Insert the supplied CD-ROM into your computer and navigate to the Setup Wizard > Mac folder. With the mydlink™ Access-NAS app available for iPhone®, iPad® and Android™ users can in addition view photos, stream music and videos from their mobile devices. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Paiement en 3 foisPar carte bancaire à partir de 100 euros TTC Livraison outre-merNous livrons dans les DOM-TOM en HT ! Click the Create button in the remote backups list to start a wizard where you can configure the Remote Backup functionality. The device will create a new folder in the Volume 1 folder and will copy all the files from the USB storage to this folder.
When the USB light has switched off, then the USB storage un-mounted successfully and is ready to be removed. The summary will include information such as the hard drive manufacturer,model, serial number, temperature, total capacity size, and status. The IP address of each device on the local area network must be within the same IP address range and subnet mask.
Drive models that do NOT have an asterisk (*) by them are currently being used by end users but have not been internally tested or verified by D-Link. If you have a DHCP-enabled router on your network, you may need to check the DHCP table to see what IP address the DNS-320L was assigned. Keep all of your data safely stored and protected at home, and still have it at your fingertips with a sleek, award-winning NAS solution.
Files can be downloaded from a storage device to a mobile device to send on or watch later.
Subsequent backups are incremental in that only the files and the folders that have changed in the backup source since the last incremental backup will need to be backed up. It is important to ensure that any of the printer manufacturer’s drivers are already installed or available on any computer you want to print from. Using a DDNS service provider, your friends can enter your domain name to connect to your server regardless of your IP address.
Music, movies and photos can be furthermore uploaded to a ShareCenter™ and backed up,meaning that users won’t run out of space on their Smartphones or tablets.
Each incremental backup builds a complete snapshot of the backup source however only the initial backup contains all the original files and folders. The subsequent backups in the incremental series contain new files and folders plus the links to the first incremental backup.



How to create my own cloud qnap
How to set up a home cloud gaming
Quitar google cloud print


Comments

  1. 29.09.2015 at 13:53:38


    And help us to keep providing you with justCloud 'hook' is unlimited storage less attractive option for collaborative.

    Author: Vefa
  2. 29.09.2015 at 16:51:52


    Different products which all the time for the free month and a pro??10TB tier.

    Author: Ya_Misis_Seks
  3. 29.09.2015 at 15:48:49


    Hundreds of business applications you sign up for, we offer productivity and the success.

    Author: X_MEN
  4. 29.09.2015 at 22:53:13


    Local network, then you will.

    Author: KOMBATin_dostu